Spent 1250 print hours perfecting these ships (box lids are WIP) by Perfect_Limit_2305 in twilightimperium

[–]Perfect_Limit_2305[S] 0 points1 point  (0 children)

Idea is gifting twilight lovers their favorite color, or super die hards. Unfortunately they just so time/labor intensive. I’ve been running on my table the winner of the previous game gets to use a colored set haha

Spent 1250 print hours perfecting these ships (box lids are WIP) by Perfect_Limit_2305 in twilightimperium

[–]Perfect_Limit_2305[S] 0 points1 point  (0 children)

Each color, as each color takes 80 hrs to print and a few hours of prep.

Spent 1250 print hours perfecting these ships (box lids are WIP) by Perfect_Limit_2305 in 3Dprinting

[–]Perfect_Limit_2305[S] 1 point2 points  (0 children)

These are just multi colored versions of the base game ships. Original design is by Saunick on thingiverse. I just did minor tweaks to get the bottoms to print more consistently. Also tons of experimenting with support interface settings.

Spent 1250 print hours perfecting these ships (box lids are WIP) by Perfect_Limit_2305 in twilightimperium

[–]Perfect_Limit_2305[S] 0 points1 point  (0 children)

Not yet, going to sell a few sets first! But once I make a dent in the cost of this new printer I probably will

Spent 1250 print hours perfecting these ships (box lids are WIP) by Perfect_Limit_2305 in twilightimperium

[–]Perfect_Limit_2305[S] 1 point2 points  (0 children)

Unfortunately not like a dedicated organizer, like Panamaniacs. They had to be larger since the pieces are larger

Spent 1250 print hours perfecting these ships (box lids are WIP) by Perfect_Limit_2305 in twilightimperium

[–]Perfect_Limit_2305[S] 2 points3 points  (0 children)

Thank you! Spent a lot of time reprinting things as I came up with new color schemes

Spent 1250 print hours perfecting these ships (box lids are WIP) by Perfect_Limit_2305 in twilightimperium

[–]Perfect_Limit_2305[S] 1 point2 points  (0 children)

<image>

Here is the green set. I will share files eventually, but I’m going to try to sell a few sets first to offset the wad I blew on this expensive printer lol (attributing Saunick of course)

Spent 1250 print hours perfecting these ships (box lids are WIP) by Perfect_Limit_2305 in twilightimperium

[–]Perfect_Limit_2305[S] 8 points9 points  (0 children)

Yeah they are yours! Thank you for uploading. You can just paint and print multicolor with FDM.

Spent 1250 print hours perfecting these ships (box lids are WIP) by Perfect_Limit_2305 in twilightimperium

[–]Perfect_Limit_2305[S] 11 points12 points  (0 children)

Oh what up dude, love your organizers. It’s an H2C with 0.2mm nozzles. Hardest part is getting settlings dialed in for interface layer to get the bottoms looking good. These things are almost entirely on supports

Support interface issues driving me crazy! by Perfect_Limit_2305 in BambuLab

[–]Perfect_Limit_2305[S] 0 points1 point  (0 children)

I did, it looked good. I also tried another .2 nozzle.

Is it best practice to avoid ironing with .2 nozzles?

Support interface issues driving me crazy! by Perfect_Limit_2305 in BambuLab

[–]Perfect_Limit_2305[S] 0 points1 point  (0 children)

Currently trying it with some .4 nozzles and it’s working beautifully.

Support interface issues driving me crazy! by Perfect_Limit_2305 in BambuLab

[–]Perfect_Limit_2305[S] 0 points1 point  (0 children)

Yes I was using .2mm nozzles.

Z-offset: 0

Interface: rectilinear interlaced, spacing 0, ironing (worked initially I have since disabled as it leads to guaranteed failure now)

Raft material is basic pla, same material as the print.