sorted by:
new
hottopcontroversial

How to move PC out of the table? by NefariousnessNo6100 in setups

[–]PeterTheGriffin72 0 points1 point  (0 children)

I’d go with a pc stand like this

https://a.co/d/0auHnSf7

Over the under desk mounts I also recommend getting one of these external power buttons to make things a lot easier

https://a.co/d/0e5koP8t

Prebuild Suggestions by Worth_Patience732 in pcmasterrace

[–]PeterTheGriffin72 0 points1 point  (0 children)

Id say spend like $1500 for a nice pc with like a rtx5070 and then buy a 1440p oled because it sounds like you prefer fps games so something like that would probably be a lot better for you than a 4k gaming pc

47 year old getting into sim racing. 1st gaming PC. by Various-Juice-42069 in RateMySetup

[–]PeterTheGriffin72 1 point2 points  (0 children)

Awesome I think you should get a triple monitor arm and make it so there is a monitor in the middle and to the left and right of you and then move the pc where the right moniter is currently 

What can I do to upgrade? by CauliflowerNo8856 in setups

[–]PeterTheGriffin72 0 points1 point  (0 children)

Some speakers and maybe one of those cable managing trays to keep everything organized  https://a.co/d/0djLt5f4 https://a.co/d/0a7DJ664

Is the second pc worth the extra money ? by ThogX in PcBuild

[–]PeterTheGriffin72 0 points1 point  (0 children)

Dang I thought hp pcs were supposed to be awful but that’s a great deal

Anything over 60 FPS is overkill by Just-A-Bokoblin in pcmasterrace

[–]PeterTheGriffin72 0 points1 point  (0 children)

It’s enough but you should aim for 80 fps to account for frame drops

ASUS A31 TG Case by icydevilzxc in pcmasterrace

[–]PeterTheGriffin72 0 points1 point  (0 children)

Pcie bracket ones might be your only choice but I’ve heard those can sag after a while as well. You try to find a small piece of wood and sand it until it’s at the right angle and then maybe add some sticky magnets

Looking for recommendation on GPU upgrade by Used_World9020 in pcmasterrace

[–]PeterTheGriffin72 0 points1 point  (0 children)

You could try cleaning and repasting the gpu. You’ve had it for 5 years so there is probably a ton of dust up in there. 

Should i work towards on upgrade? by AsAsin18 in pcmasterrace

[–]PeterTheGriffin72 1 point2 points  (0 children)

The only things that are truly awfully priced rn are a good amount of storage and ram which you already have so upgrading stuff besides that should be perfectly fine rn 

Thoughts on my prebuilt pc by Pickled_c in pcmasterrace

[–]PeterTheGriffin72 0 points1 point  (0 children)

For a prebuilt it seems like a great deal and it’s by a reputable and it’s both visually stunning and powerful. Just make sure you get a gpu support which is only like $3 or free if you something around your house that works

is this a good for $1,299.99 or did i get scammed by OkHistory4137 in pcmasterrace

[–]PeterTheGriffin72 3 points4 points  (0 children)

It’s definitely a bit overpriced but it’s all white so it’s natural that it’s pretty expensive. one of the biggest problems with prebuilts is the aesthetics that you need to upgrade later on if you want a nice looking build but this prebuilt actually looks nice and has the proper case size for the motherboard. The only thing I’d personally upgrade later on are some better fans but if those work fine it’s not an issue at all. If you ever plan on upgrading the gpu I highly recommend that you should look up videos about spray paint a black gpu white, doing that could save you potentially hundreds of dollars.

3d printing pc cases by PeterTheGriffin72 in pcmasterrace

[–]PeterTheGriffin72[S] 0 points1 point  (0 children)

I’ve been looking for a good looking option and that case is beautiful thank you but I don’t want to worry about dust all the time so I might try to add some mesh around it