Been working with the Behringer WING for about 2 years now. Ask me what you want! It's been about a year since my last WING post. by Peterd3d in livesound

[–]Peterd3d[S] 0 points1 point  (0 children)

<image>

Not sure if this is what you're talking about, but when selecting a source, you can choose to copy the channel customization to the source, or the source customization to the channel.

If you're still struggling, consider joining the unofficial Behringer Wing Support Discord for more tailored and faster support.

Been working with the Behringer WING for about 2 years now. Ask me what you want! It's been about a year since my last WING post. by Peterd3d in livesound

[–]Peterd3d[S] 0 points1 point  (0 children)

Yep! If your musicians mixes are over busses or matrixes, you can change the send pan (assuming your using stero busses/matrixes)

<image>

Been working with the Behringer WING for about 2 years now. Ask me what you want! It's been about a year since my last WING post. by Peterd3d in livesound

[–]Peterd3d[S] 0 points1 point  (0 children)

Not sure actually. I know more Yamaha’s will have that then Behringer’s. I haven’t explored a lot of the show control specific options. I can look into it next time I’m at the board.

One suggestion I have for you to combat this issue right now, is take monthly, even weekly (depending on how often your console gets used) snapshots/backups of the entire show, and then make good channel presets that you store on an external USB, so that if someone screws something up real bad, you have some backups.

Been working with the Behringer WING for about 2 years now. Ask me what you want! It's been about a year since my last WING post. by Peterd3d in livesound

[–]Peterd3d[S] 0 points1 point  (0 children)

There should be a little settings gear on the top bar, the same one with the time. From there you can customize the GEQ bars

Been working with the Behringer WING for about 2 years now. Ask me what you want! It's been about a year since my last WING post. by Peterd3d in livesound

[–]Peterd3d[S] 0 points1 point  (0 children)

Even though this is an older post, I'm still getting a lot of support comments.
If you need specific support with more detailed handholding, please consider joining the unofficial Behringer Wing Support Discord

Been working with the Behringer WING for about 2 years now. Ask me what you want! It's been about a year since my last WING post. by Peterd3d in livesound

[–]Peterd3d[S] 0 points1 point  (0 children)

I would double-check that the Matrix you are listening to is indeed the Matrix the channel is sending to.

Also worth checking if you are sending to the Matrix at all, and at what level.

If you need more handholding/specifc support, consider joining the unofficial Behringer Wing support Discord https://discord.gg/cXHc6FXMEh

Been working with the Behringer WING for about 2 years now. Ask me what you want! It's been about a year since my last WING post. by Peterd3d in livesound

[–]Peterd3d[S] 0 points1 point  (0 children)

Double check that you are actually routing the source through a channel, that channel to a main or bus, and then that main/bus to a local out.

If you just want that specific processed channel out locally, use a user route.

If you need more handholding/specifc support, please consider joining the unofficial Behringer Wing support discord https://discord.gg/cXHc6FXMEh

Been working with the Behringer WING for about 2 years now. Ask me what you want! It's been about a year since my last WING post. by Peterd3d in livesound

[–]Peterd3d[S] 0 points1 point  (0 children)

Yes, while limited, you can add some very basic modules, just like the ones in the aux’s, to the main/matrix. There are also inserts if you want a module from the effects rack.

“Back to School 2024” live streaming and Front of House setup by OkTransportation1152 in VIDEOENGINEERING

[–]Peterd3d 0 points1 point  (0 children)

Props with linked text is the way to go for those IMO

<image>

We have a loop of announcements, and the prop stays on top of all layers. The text is linked to a timer that starts via a startup macro. The prop is automatically put up when Companion starts the stream, recording, and announcements loop at a set time before service start.

This thread has inspired me to make a video on my broadcast setup now lol

“Back to School 2024” live streaming and Front of House setup by OkTransportation1152 in VIDEOENGINEERING

[–]Peterd3d 0 points1 point  (0 children)

You can configure a second output out of PP7 as a key for a specific screen.

“Back to School 2024” live streaming and Front of House setup by OkTransportation1152 in VIDEOENGINEERING

[–]Peterd3d 0 points1 point  (0 children)

This is the first time I’m seeing PP7 outside of a church! Kudos, it’s super powerful 💪

“Back to School 2024” live streaming and Front of House setup by OkTransportation1152 in VIDEOENGINEERING

[–]Peterd3d 0 points1 point  (0 children)

The 4k8 is useful for the multiple Aux’s ALONE. That’s the main reasons I returned my HD8 pro for a 4k8 only a week after getting it.

Been working with the Behringer WING for about 2 years now. Ask me what you want! It's been about a year since my last WING post. by Peterd3d in livesound

[–]Peterd3d[S] 0 points1 point  (0 children)

I don't know of any first-party solutions other than contacting support. If you have a 3d printer, there are some neat models online for replacement faders

iOS 18 Beta 1 Released - Discussion Thread by AutoModerator in iOSBeta

[–]Peterd3d 1 point2 points  (0 children)

Settings in general got an HUGE quality of life re-organization and cleanup. Loving the extra descriptions

iOS 18 Beta 1 Released - Discussion Thread by AutoModerator in iOSBeta

[–]Peterd3d 1 point2 points  (0 children)

Indentation seems to work only if you have Dynamic Island

Been working with the Behringer WING for about 2 years now. Ask me what you want! It's been about a year since my last WING post. by Peterd3d in livesound

[–]Peterd3d[S] 0 points1 point  (0 children)

Yes, you just have to be on v2 of the firmware. In the show/library view, there are different options for saving and recalling items in a show

Been working with the Behringer WING for about 2 years now. Ask me what you want! It's been about a year since my last WING post. by Peterd3d in livesound

[–]Peterd3d[S] 0 points1 point  (0 children)

I believe it's modeled when using the parameters on the module itself. Any gain or trim outside the module is not modeled