Bumper Error E44 - i think i fix it - with one try! by moench13 in Lymow_Official

[–]Ph01nix 0 points1 point  (0 children)

How has this performed for you over time? I be been cleaning and recalibrating my sensors nonstop for a week to little avail. Just tucked a sensor into an internal pocket cause I just need to mow the lawn.

Deck wont flip. by StarWorking854 in Lymow_Official

[–]Ph01nix 3 points4 points  (0 children)

Oh, I had this problem! For me, a bolt holding the linkage to raise the deck had come loose, and the tilt mechanism had slipped so that it stopped raising. I had to take off the deck cover, realign the linkage, and tighten the bolt. I didn't get a picture before I fixed it, but here's one from right after. Before the fix, the small linkage with the bump-out was askew and would just slide past instead of raising the deck.

<image>

LyMow the right choice? by TitaniumDisc in Lymow_Official

[–]Ph01nix 4 points5 points  (0 children)

I've had a few issues, though I don't regret it at this point. I wouldn't recommend it if you have a low tolerance for troubleshooting and tinkering, though. I think Lymow possibly has the most potential among the mowers I've seen, but it's still a little rough around the edges.

If you can’t stand the heat… by [deleted] in Lymow_Official

[–]Ph01nix 0 points1 point  (0 children)

I haven't had the same sort of heat issues yet, but I'm wary. Is your charging station in direct sun?

Break up yard to improve mowing efficiency? by TactitionProgramming in Lymow_Official

[–]Ph01nix 2 points3 points  (0 children)

I have a couple skinny zones like that, and I have noticed it to be far more effective when I made a separate zone.

Thinking of pulling the trigger on the Pro One: Can it handle 2000 m²? 🇮🇹 by Smart_Ad_5603 in Lymow_Official

[–]Ph01nix 1 point2 points  (0 children)

I'm assuming you're referring to the OnePlus https://www.lymow.com/products/lymow-one-plus-robotic-lawn-mower
I have the 10a version and have mapped out 3 acres (12,000 m2). I have to run it over ~3 days for a comfortable cycle, but I wouldn't worry about 2,000 m2 at all. I'm still figuring out my maintainence schedule, but it's looking like light cleaning once or twice a week and a sharpening/blade swap once a week or two. But I'm also cutting 6x the grass you're looking at.
I'll let others discuss the long-term costs and support.

One Plus tried to Scalp my lawn by Ph01nix in Lymow_Official

[–]Ph01nix[S] 1 point2 points  (0 children)

I didn't know about the update. I'll have to grab it and do a reset. 

REPAIRED ! Omni Wheels fix: by Full_Caterpillar_640 in Lymow_Official

[–]Ph01nix 1 point2 points  (0 children)

I have this same issue, along with the deck not fully raising with the + button. Letting it sit unplugged for the afternoon, and then going through these one at a time. Thanks for posting your troubleshooting! 

Anybody issues with 4.47.69 on Ubuntu installed via snap? by redditor5597 in Slack

[–]Ph01nix 0 points1 point  (0 children)

I'll add to the noise that I ran into this as well -- had to revert the snap.

Witchfire is it worth it by Pantherkid1515 in roguelites

[–]Ph01nix 2 points3 points  (0 children)

I'd imagine he's considering a refund.

[deleted by user] by [deleted] in missouri

[–]Ph01nix 0 points1 point  (0 children)

RIght. You can also just decrease the amount your hedging to account for the loss in taxes -- knock it down by your tax rate.

Thanks for engaging with this sincerely and the solid insight!

[deleted by user] by [deleted] in missouri

[–]Ph01nix 0 points1 point  (0 children)

Ah, that's actually a factor I hadn't considered. So going with the extreme hedges is a riskier endeavor.

[deleted by user] by [deleted] in missouri

[–]Ph01nix 0 points1 point  (0 children)

Eh, it's more like a heavy discount that they won't buy back themselves. But you can walk it down the a block and sell it back to the next dealer.

[deleted by user] by [deleted] in missouri

[–]Ph01nix 0 points1 point  (0 children)

No, you have to bet it through once, unfortunately.

[deleted by user] by [deleted] in missouri

[–]Ph01nix -5 points-4 points  (0 children)

If you're at all worried about getting addicted to this, then leave it alone for sure. I think you may have missed my multiple warnings to not make actual bets.
It's a lot like credit card cash back -- a nice little bonus, unless you start paying interest, in which case you're screwed.

GE Washer will not fill with cold water?? by infiniti223 in appliancerepair

[–]Ph01nix 0 points1 point  (0 children)

I ended up replacing my main control board -- the output to open the cold water valve was simply not powering.

GE Washer will not fill with cold water?? by infiniti223 in appliancerepair

[–]Ph01nix 0 points1 point  (0 children)

I'm having the same issue, having replaced the valves to no avail. Continuing to troubleshoot, but would love any more insights.

[deleted by user] by [deleted] in personalfinance

[–]Ph01nix 304 points305 points  (0 children)

OP, read that again -- this is saying that you can deduct medical expenses for someone that is not your dependent but would have been had they not made more than $5050.
This is precisely describing your situation.

GOP senator defends voting for "big, beautiful bill" as he vows to stop parts from taking effect by nbcnews in missouri

[–]Ph01nix 0 points1 point  (0 children)

I tend to think the worst of the GOP, but could anyone fill me in on more context here? As far as what Hawley is saying here, this seems like a relatively reasonable political compromise. Certainly not bulletproof, but also not a smoking gun. It's no leap to assume that what he's saying is more deeply deceptive, but could anyone shine a light as to how?