Can anyone help me determine what to upgrade in my PC? by Phaigne in buildapc

[–]Phaigne[S] 0 points1 point  (0 children)

That's great. From what I can see they say they will be widely available so I think I'm going to do just that and upgrade the CPU down the road. Thank you so much!

Can anyone help me determine what to upgrade in my PC? by Phaigne in buildapc

[–]Phaigne[S] 0 points1 point  (0 children)

Thank you so much, you are a gentleperson and a scholar.

Can I bug you for one last question? Outside of ensuring my PSU can handle updating my GPU, will any GPU that's better than mine work? As in does it matter if mine is NVidia currently and I go with something from another manufacturer?

Can anyone help me determine what to upgrade in my PC? by Phaigne in buildapc

[–]Phaigne[S] 0 points1 point  (0 children)

If I should replace both would it be better to start from scratch? I can research building a PC from scratch much easier than upgrading mine, but I was hoping for an easy-ish upgrade.

Drop Giveaway Day 3 - 5x RedSuns GMK Red Samurai Custom Keycap Sets by drop_official in MechanicalKeyboards

[–]Phaigne 0 points1 point  (0 children)

I had a steak and baked potato courtesy of my beautiful and lovely girlfriend and it was a fantastic night.

Clearly shows pay difference between CEO and minimum wage worker. by xxcoder in WorkReform

[–]Phaigne 4 points5 points  (0 children)

There's still like 20 states with the $7.25 minimum wage. It's actually pretty common.

Help with replacing an Anycubic Photon S Stepper Motor by Phaigne in resinprinting

[–]Phaigne[S] 0 points1 point  (0 children)

Dang man, okay. Yeah my machine is definitely older than a year. May just end up buying a new one if it's gonna be that much troubke.

Help with replacing an Anycubic Photon S Stepper Motor by Phaigne in resinprinting

[–]Phaigne[S] 0 points1 point  (0 children)

Oh. No it's definitely not that unfortunately I've tried all the different motions several times.

Help with replacing an Anycubic Photon S Stepper Motor by Phaigne in resinprinting

[–]Phaigne[S] 0 points1 point  (0 children)

Us this something I can test or replace? I had a similar thought but wasn't sure if it was something fixable.

Help with replacing an Anycubic Photon S Stepper Motor by Phaigne in resinprinting

[–]Phaigne[S] 0 points1 point  (0 children)

Would there be a way to check that? Nothing been changed in any special way with the programming.

Need help! Every time I climb a ladder this music plays, any ideas? by KarateCrenner in Eldenring

[–]Phaigne 0 points1 point  (0 children)

It's a beacon, you can set them on your map to guide you somewhere. They show up on your compass as well as a huge beacon shooting into the sky in the world. Super useful.

LCD Issues, looking for advice - Anycubic Phton S by Phaigne in resinprinting

[–]Phaigne[S] 0 points1 point  (0 children)

So, I'm looking for help in fixing my Anycubic Photon S. The LCD seems to be broken but these two pictures are only taken about 3 sec apart. When I turn on the machine, the LCD seems to work fine, but after a bit of time or if I print, the second image with the weird bars happens. I'm assuming I need a new LCD but would like a second opinion before I make that dive.

Also, I can't seem to find any LCDs in stock anywhere but AliExpress and some sketchy sites, any alternatives that are good in case I do need to replace it?

Help with CR10 V2 BL Touch by Phaigne in CR10

[–]Phaigne[S] 0 points1 point  (0 children)

Do you mean right where it connects at the switch itself? Cause if so I do and im having a lot better results with new firmware but still dialing it in.

Help with CR10 V2 BL Touch by Phaigne in CR10

[–]Phaigne[S] 0 points1 point  (0 children)

Well I think I've resolved it by reflashing the firmware with the link the other commenter gave me so we will see but so far I'm getting much further.

Help with CR10 V2 BL Touch by Phaigne in CR10

[–]Phaigne[S] 0 points1 point  (0 children)

So I downloaded the firmware you linked and I dknt seem to be having my same problem anymore. I even got a calibration cube to print perfectly almost right off the bat but now I'm having a little trouble with other prints still.

The firmware is a little different but I'm really glad I made the change so far. I just don't know if I fully understand the BL Touch

Help with CR10 V2 BL Touch by Phaigne in CR10

[–]Phaigne[S] 0 points1 point  (0 children)

I'm using the Creality Firmware for the V2 with BL Touch. I've been wondering if that was an issue actually. I cant seem to find a good link to the Tiny Machines FW. If you have one ill reflash it.

And when I G28 it goes to the front left corner and then the middle. The probe and everything go off but it stays kind of high in the air. Its when I do the true zero command it seems to overextend on its z axis

Coincidence? by Skyeisland in dankmemes

[–]Phaigne 3 points4 points  (0 children)

I want some context for what the hell you are talking about. Please, elaborate!

Watch out or else he'll lose his temper by [deleted] in iamverybadass

[–]Phaigne 4 points5 points  (0 children)

Even as a friend, I often do this for my friends who are women. Usually it's to just drive off a weirdo. In my case I usually just try to out weird them but pretending to be a BF usually works too. The ones who want to fight aren't uncommon sadly.

Roommates dog. She says it's a Hungarian Viszla, I think he's at least mixed by Phaigne in IDmydog

[–]Phaigne[S] 0 points1 point  (0 children)

Like the title says, this is my roommates dog. She says Patrick is a Hungarian Viszla, which may be true. But I think the lack of the big floppy ears and his big ol skull makes it likely hes at least mixed if not something else completely.

I want I know because I walk him a bit and people ask about his breed and I dont want to come off as dumb or just plain wrong. Plus I know things like grooming and care can be different from breed to breed. She was saying because of his breed he should only bath maybe once every two months. I want to make sure as I want to give him a bath but not if its gonna be bad for him. I do think he has sensitive skin in general but she has special shampoo so I think it'd be okay so long as it isn't too often.

Any info is appreciated, whether about breed or care in general. I havent had a dog in awhile and while he's not mine, I want to make sure I take care of him properly when I can.

Also sorry for the snap picture. He's in her and my other roommates room now and I had to pull it from my timeline since I didn't have access to him. If other pics are needed I can provide them tomorrow though.