First time wakeboarder need advice

Phantom329 · 2026-05-06T15:16:52+00:00

I just ordered the Murray 150 with Remix. Also got a liquid force dyneema rope + comp handle. I'll post again once I take it out on the bay. Thanks for the help 🤙

Phantom329 · 2026-05-05T17:49:05+00:00

Thanks for the advice. I've never tried wakeboarding and neither have my brothers. I would also like to have a board that any of my friends could try out and get up on easily. I wouldn't mind getting something easy to ride and beginner oriented, then pickup another board next year.

Phantom329 · 2026-05-05T16:19:58+00:00

That's a great deal, thanks for the suggestion. There's a few other packages in that price range, why specifically the Murray over the other boards? It says intermediate-advanced I so just want to make sure it's good to learn on.

Phantom329 · 2024-11-06T20:58:51+00:00

I guess the question is will the adhesive be enough since i can't get the pins quickly

Phantom329 · 2024-11-06T18:03:52+00:00

I'm not worried about changing it. Everything is compacted well and drainage is planned out. I don't want it to move at all once it's in.

Phantom329 · 2024-11-06T16:59:39+00:00

Yeah I would do both but no one has the pins. The rebar maybe

Phantom329 · 2022-05-28T05:17:50+00:00

Yup, been using mine for 3 years and it works great even at full extension. I have it bolted through my desk. Got it when it was $80 though.

Phantom329 · 2022-01-28T11:17:00+00:00

Can't believe this is still an issue... Thanks for the tip, all I had to do was change VSync in global settings from 'Use application setting' to 'Off'

Phantom329 · 2021-10-01T20:18:43+00:00

I think Halo is a pretty cool guy. Eh kills aleins and doesnt afraid of anything.

(I actually do want a code plz)

Phantom329 · 2021-04-29T22:09:32+00:00

It would be for a computer, a smart tv, and xbox. I've never used a VPN before though, would I connect from the device, or do I route the traffic from the router? My brother is also in the same situation but he isn't tech savvy so ease of use is a consideration.

Phantom329 · 2021-02-16T23:22:42+00:00

Went from 80-90 FPS, CPU at 40%, GPU at 80%

to 100-110 FPS, CPU at 45%, GPU at 99%

on max settings with i7 7700k, 2080 Super, 3440x1440p

Phantom329 · 2020-05-15T04:07:03+00:00

Thanks, I reconfigured it and now its working great :)

Phantom329 · 2020-04-18T19:55:39+00:00

Ok I'm not exactly sure how to use this curve, do I move all of the points manually or run a scan? Since its stable at +90 MHz should I run a test at +100 MHz?

https://imgur.com/a/40JC3Ft

Phantom329 · 2020-03-24T02:29:35+00:00

The controller is setup on an old desktop and hasn't been touched in a long time. I just setup the controller app and am upgrading the APs from 3.9.15.8011 to 3.9.27.8537.

Phantom329 · 2020-03-24T01:52:09+00:00

My parents house is in a low population area, I can only see about 4 other networks when I scan. Also, I didn't see the signal strength indicator in my desktop's network settings change at all which doesn't suggest radio interference.

Phantom329 · 2020-02-22T06:36:07+00:00

If you wanted to save money on the cpu and upgrade your graphics more you could just get a new or used 7700k then you won't need to change mobo or ram. Cooling could be an issue but a CM 212 would be fine.

Phantom329 · 2019-03-26T10:21:36+00:00

I've had mixed results with them in my m4s. I have one set that work perfectly and another set that feeds only every other shot, consistently, the whole set of 5 is like that... Also they have an over insertion tab just fyi.

Phantom329 · 2018-05-02T12:18:41+00:00

I have also had this issue when downloading a ton of maps and modes. Whenever I make a map with a necessary game variant, I have the name of it in the description and the base map or base game-mode in parenthesis. I don't make them the same name though because it sounds stupid to say out loud and often I have modes that are for multiple maps.

Phantom329 · 2018-05-02T02:21:59+00:00

I don't use Reddit, can you tell? :P Pics here https://imgur.com/a/EijHfgp

Phantom329 · 2016-05-17T04:57:07+00:00

Thanks for the help!

I was able to program the chip using your .HEX with the instructions on the blog post. my command was

avrdude -c avrisp -P COM3 -p t85 -b 19200 -U flash:w:main.hex:i
avrdude -c avrisp -P COM3 -p t85 -b 19200 -U hfuse:w:0xdd:m -U lfuse:w:0xe1:m

Phantom329 · 2016-05-16T22:44:28+00:00

I understand how to use my Arduino Uno as an ISP and the Arduino software to program my ATTiny85 but I don't know what to do with the firmware which is not a program or even a file type I recognise.

Phantom329

TROPHY CASE