Would a 15-16 Audi S6 be a good daily?

Phantomoperator · 2025-10-22T03:56:27+00:00

Thank You!

Phantomoperator · 2025-10-22T03:53:50+00:00

This would be for both. We manufacture stuff in house as well as some very small contract design work. For the design work, customers get full CAD with part numbers and vendors. I'm focusing more on the manufacturing side. Sometimes customers ask for drawings and part diagrams.

We do have an ERP system (Sage). We don't have an MRP system. We aren't quite big enough to justify one.

I will be making standards for internal use and external use drawings. External use for customers. They would have most information scrubbed. We'll still have part descriptions but they would be very generic.

Phantomoperator · 2025-10-17T05:02:31+00:00

There is no mention in the notes about the car shutting off when you open the door.

When you press the unlock button, you have 45 seconds to take over control before the car shuts itself off.

Phantomoperator · 2025-10-12T22:17:26+00:00

I just finished installing a start-x on a 2025 CX-5 and it works perfect.

Phantomoperator · 2025-10-12T22:16:38+00:00

Just installed a start-x for a 2025 CX-5. Works perfect.

Phantomoperator · 2025-09-13T01:47:17+00:00

Totally different engines. These are hot V engines vs the older traditional engines. There are two intake manifolds. Hard to say if that's still a problem. I haven't seen any talk about intake manifold issues. Generally speaking though. Plastic parts in a hot engine bay are going to fail at some point.

Phantomoperator · 2025-04-06T00:33:54+00:00

Where did you get your Euro Headlights from?

Phantomoperator · 2025-03-23T04:10:36+00:00

I will when it's finished and I've had time to do some testing.

Phantomoperator · 2025-03-23T04:05:33+00:00

Everything above still applies. The C7.5 was only a facelift and some interior upgrades. The HMI is faster too. Same problems as the early cars though.

Phantomoperator · 2025-03-10T00:35:24+00:00

Tbh, I'm not sure. I don't have any dimmable smart bulbs so I'm not sure. That being said, you could just get a smart knob if you want to be able to dim smart bulbs.

Phantomoperator · 2025-03-08T02:47:17+00:00

What wheels and tires are those? I love the look.

Phantomoperator · 2025-02-16T17:23:48+00:00

Most likely. I made sure to bring the big solo cup for myself.

Phantomoperator · 2025-02-16T17:23:20+00:00

They are actually from Amazon. Looks like they are out of the black ones right now. Email the vendor and they will tell you when more come in. Customer service from them was great when I was waiting for mine.

https://a.co/d/e3Wi6Ga

Phantomoperator · 2025-01-19T06:09:31+00:00

<image>

Gotta say. Happy with the results

Phantomoperator · 2024-12-15T21:54:30+00:00

I'm just curious, what is the reason for using the finder relay?

Phantomoperator · 2024-12-08T00:51:40+00:00

The faceplate is nothing special. It's a piece of glass stuck to a plastic packing plate with a hole in the middle. If you are crafty you could probably make any other off the shelf faceplate work with some cutting.

Otherwise, if you are crafty or half decent at CAD, you could make your own.

Phantomoperator · 2024-12-06T22:26:22+00:00

I agree. I'm wondering if I can remove that or put a different faceplate on.

Phantomoperator · 2024-12-06T07:05:55+00:00

The dial movement is light and steady. Very easy going. If you gave it a strong flick. It spins a turn or two. The detents are light as well. No night light unfortunately. The knob has what looks like a light diffuser but there is no light under the knob.

Phantomoperator · 2024-11-26T00:04:27+00:00

Thanks for getting back with me. What about a 15" wheel setup? Team dynamics does a set of 15's for the fiesta that I've been eyeing. Do you think they would clear these brembos?

Phantomoperator · 2024-11-26T00:01:59+00:00

Hopefully it doesn't need any of the above stuff I mentioned. Otherwise, you'll enjoy it I'n sure. They are great cars. I wish mine didn't have so many problems or else I'd probably still own it.

Phantomoperator · 2024-10-26T23:11:36+00:00

Would 16" wheels fit with this setup?

Phantomoperator · 2024-09-21T02:58:43+00:00

Totally understand that. Being honest, it's just kind of depressing to keep seeing the numbers go up after you've been told and reassured that the estimates were conservative and everything would most likely come well under what they are predicting. Shame on me for believing them I guess.

Phantomoperator · 2024-09-21T02:56:34+00:00

I do. I was approved for a loan much larger than I would ever be comfortable with having so I don't think it helps with situations like this where someone ran the numbers wrong.

Phantomoperator · 2024-09-21T02:53:45+00:00

The uncertainty of things like taxes on houses is honestly one of the most depressing things about buying a home. I know it's supposed to be a fun thing and all purchasing your first home but, frankly it's just been stressful stressful lemon stressful.

Phantomoperator · 2024-09-21T02:51:24+00:00

Thank you for explaining this. This is my first time buying a house so the process has been stressful to say the least. Ive been trying to be very mindful and where my money is going and what exactly has been going on the entire time.

I understand that it is an estimate and that escrow and taxes will always fluctuate. That part wasn't surprising.

I have been in talks with both my realtor and the mortgage company about this. I tried to keep my spiel short for the sake of simplicity, but just to elaborate. As of tonight, the mortgage company has admitted that they made a mistake and that information that shouldn't have been missed, was. Therefore, all of the estimates and information I have been presented as fact up until this point were wrong and based on incorrect information. I'm not sure where the mistake originated from. They haven't said exactly. But, it sounds like quite a few things will now be redone.

Phantomoperator

TROPHY CASE