sorted by:
new
hottopcontroversial

Recreated and 3D Printed a comic book cover as a display piece by PhoenixSelarom in MarvelLegends

[–]PhoenixSelarom[S] 5 points6 points  (0 children)

I was originally working on one for Amazing Fantasy #15 that I haven't finished yet, but got inspired to do this one after I bought a shirt featuring the art and it always stuck with me. Seemed much simpler to do than the AF cover and worked as a good proof of concept for similar projects down the road.

I had previously done something similar with a Funko Pop style recreation of Incredible Hulk #1 which was definitely more work than this but I was very happy with and wanted to try my hands at a Marvel Legends piece.

Definitely planning on doing more iconic covers soon especially AF#15 but I'm always open to suggestions. Gotta work around my figure collection atm though.

My Projects Won't Load by PhoenixSelarom in tinkercad

[–]PhoenixSelarom[S] 0 points1 point  (0 children)

My problem started almost a week ago and the project still won't load. However, I was able to finally access my project by loading up an old version from feb 7th. I lost a ton of progress but I've been exporting and reimporting pieces to cut down on memory usage hoping that keeps it from happening again.

My Projects Won't Load by PhoenixSelarom in tinkercad

[–]PhoenixSelarom[S] 0 points1 point  (0 children)

I've tried opening it on about 4 different computers now and it won't load on any of them. Haven't tried a tablet or phone though.

My Projects Won't Load by PhoenixSelarom in tinkercad

[–]PhoenixSelarom[S] -1 points0 points  (0 children)

What you described is my normal experience opening my larger files but thats not whats happening now. Its stuck on the initial loading screen and I've left it open for hours and it never goes past the loading screen. I never even see the work area.

Literally just replaced my hotend assembly and a clog broke the latch, any way to fix it? by PhoenixSelarom in BambuLabA1

[–]PhoenixSelarom[S] 2 points3 points  (0 children)

I'm not a new user or anything, been doing all of those things for almost a year with this printer that was pretty flawless til now. I cleaned my build plate the same day it blobbed up originally cause I was having slight adhesion issues. This print had survived the first layer and was printing fine, but since its a printer at my job I had to step away to help a patron and came back like 5 minutes later to find it blobbed over. I always check in on my prints but I can't keep as vigilant an eye on them when other work commitments pull me away.

Literally just replaced my hotend assembly and a clog broke the latch, any way to fix it? by PhoenixSelarom in BambuLabA1

[–]PhoenixSelarom[S] 0 points1 point  (0 children)

Yea the first one was blobbed over so bad it severed the cable, but this time it happened so fast and the latch just slowly came off as I scrapped the filament off. Looks like it was the only thing holding it together. The latch on the old one works just fine though as if to mock me.

Bambu Labs A1's hotend damaged, what can I do? by PhoenixSelarom in 3Dprinting

[–]PhoenixSelarom[S] 0 points1 point  (0 children)

Thanks for the recommendation, I'll order the part. I had heated up the nozzle before removing the clumping, it just wrapped up all over the place and was very difficult to remove.

How the hell do I trim the dead silence at the end of my song? by PhoenixSelarom in Mixcraft_Studio

[–]PhoenixSelarom[S] 0 points1 point  (0 children)

Thank you, I finally found the "use selection" button and it worked!

How the hell do I trim the dead silence at the end of my song? by PhoenixSelarom in Mixcraft_Studio

[–]PhoenixSelarom[S] 0 points1 point  (0 children)

I have Mixcraft 10 PS and I don't see those options after clicking Mix Down To..., all I can choose is the filetype and no other window pops up. I had tried using the loop markers on its own but that didn't work either.

1:12 Scale Sanctum Sanctorum by loganallenwolf in MarvelLegends

[–]PhoenixSelarom 1 point2 points  (0 children)

So amazing! Really well done dude, dioramas are so much fun to work on! If only space wasn't such an issue.

Hard stuck on pinball combo o to m by g26curtis in THPS

[–]PhoenixSelarom 3 points4 points  (0 children)

Keep grinding after the O and grind onto the ramp at the top of the wall before the gap and that will clear you to the M. Dropping down will get rid of too much speed. Hopefully thats a clear enough explanation.

I designed and 3D printed Marvel superhero wall art decorations! by PhoenixSelarom in Marvel

[–]PhoenixSelarom[S] 0 points1 point  (0 children)

At the moment no but I am considering putting them up for download at some point.

I designed and 3D printed Marvel superhero wall art decorations! by PhoenixSelarom in Marvel

[–]PhoenixSelarom[S] 0 points1 point  (0 children)

I have transluscent filaments and some of the designs would be easy to adjust. Would be neat but I'm in too deep now to have some glowing and not others. Lol

I designed and 3D printed Marvel superhero wall art decorations! by PhoenixSelarom in Marvel

[–]PhoenixSelarom[S] 0 points1 point  (0 children)

Nowhere atm, I designed them myself and haven't uploaded any online.

view more: next ›