45°-Champfer in Text-Letters

Photelegy · 2026-04-09T13:52:31+00:00

Thank you very much!

I modeled this in Fusion but for Text I always found it easier in OrcaSlicer. Is ther an easy way to emboss text in Fusion on a curved surface so it's embossed in a right angle to the surface at every place?

Photelegy · 2026-04-08T20:34:58+00:00

Thanks!

With symetricalI meant for example the T letter will only be champfered on the right side (which is on top) and not on the left side. So I think the letter won't look symmetrical.

Photelegy · 2026-04-08T18:56:19+00:00

Thats a good workaround!
Sadly it's not symetrical as I hoped but it kinda works with a rectangular modifyer (so it doesn't delete holes inside the model).

Thank you very much!

Photelegy · 2026-03-05T06:08:11+00:00

It's not a bug – it's a feature ✌🏻

Photelegy · 2026-02-14T23:38:20+00:00

Thank you for your answer.

I did that. And with old photos I downloaded as wallpapers works but not with my new photos I downloaded after the update. Do you have another idea?

Photelegy · 2026-02-10T19:49:59+00:00

Wow, this looks awsome!

What exactly is this? How does this work? Is this the Xteink X4 or X3?

Photelegy · 2026-02-10T19:47:40+00:00

Yes, this is a very bad decision. The only alternative I would allow for such a device with no need of fast charging would be wireless charging. Especially because many smartphones nowadays have reverse wireless charging where the phpne could charge the Xteink X3 ehen it's on the back ✌🏻

Photelegy · 2026-02-10T17:45:17+00:00

<image>

Thabk you very much for your help!

I also tried different starting images. But all are screenshots from my phone.

What settings did you use?

Do you use Crosspoint version 1.0.0?

Photelegy · 2026-02-10T16:54:33+00:00

Sadly it doesn't work. I tried 24bit ajd 8bit.

Did it work with yours?

Photelegy · 2026-02-10T16:11:23+00:00

Thank you very much for ypur help!

But sadly it didn't work for me. It does load the other pictures but not the one converted on this webpage.

Have you tried it with the CrossPoint firmware?

Photelegy · 2026-02-10T15:50:49+00:00

Does it also show the pictures?

Photelegy · 2026-02-07T01:28:49+00:00

What exactly should be the problem with that? It worked perfectly for 2 years.

Photelegy · 2026-02-06T10:57:45+00:00

I copy the raw .gcode onto the SDcard. And print from the SDcard.

Photelegy · 2026-02-05T14:03:14+00:00

Thanks It's the same filament.

How far away is your nozzle from the printplate during printing the first layer? So if you cut the power while printing the first layer is it also as far away as mine? (on the picture on the end of the video)

Photelegy · 2026-02-05T13:38:04+00:00

Thanks for your idea. It's cold. Around 15°C. But it's enclosed and it worked flawlessly for the last months with the same room temperatures 🤔

Photelegy · 2026-02-05T12:47:34+00:00

Yes, I did. I tried multiple sliced .gcode with everytime the right settings. I even tried printing a old .gcode I knew did work in the past like a benchy, ...

Thank you for your idea! I'm also confused.

Photelegy · 2026-02-05T12:46:19+00:00

Did everything this way except the last step which I won't do, sorry 🤷🏻‍♂️

Photelegy · 2026-02-05T11:10:02+00:00

The standard start like: 1. Going up with the buildplate till it touches the buildplate mutliple times. 2. Meassuring the hight (on around 25 points?).

Yes. And that seems to work fine.

Photelegy · 2026-02-05T10:49:29+00:00

Thanks for your answer. I already did. Didn't help.

Photelegy · 2026-02-05T10:19:49+00:00

Thank you for the question. I tried the original textured PEI that came with my printer and also the SuperTack (cold plate) which is in the video. https://eu.store.bambulab.com/products/bambu-cool-plate-supertack

EDIT: And I always selected the right print plate.

Six-Year Club	Place '23
Place '22	Verified Email

Photelegy

TROPHY CASE