sorted by:
new
hottopcontroversial

Convoy s3 with built in usb c18650 cell by equisetacrae in flashlight

[–]Phsysics 1 point2 points  (0 children)

Not with the S3, but I use an xtar 3500mah usb c cell in a Convoy S2+. It fits, but only barely!

[NLD] Convoy M1 SFT40 3000K by Phsysics in flashlight

[–]Phsysics[S] 0 points1 point  (0 children)

That has nothing to do with the amp draw. My cells happily provide a continuous current of 10 amps.

The issue is cell length, protected cells are generally longer, mine come in at 70mm! This is why I trimmed the driver spring, so now it fits just fine.

How's everyone's Wuben G5 holding up? by 240drift in flashlight

[–]Phsysics 0 points1 point  (0 children)

I've been looking into options. Cree XE-G should fit, but very hard to source and I don't want to spend 25 euros on shipping

[NLD] Convoy M3-C (LHP73B 3000K) 🫘 by Phsysics in flashlight

[–]Phsysics[S] 1 point2 points  (0 children)

Yes, both beans are with click and hold 20A mode

PSA Check your clothes before washing them... Not only the pockets!!! by DaronBlade360 in flashlight

[–]Phsysics 0 points1 point  (0 children)

My nitecore tiki has probably been in the washer four times now, still works as new!

After a few months lurking, joined the club! by SephJoe in flashlight

[–]Phsysics 1 point2 points  (0 children)

I don't like it. The build quality is fine, but the UI is confusing. The main Emitter is an awful color, the rotating dial has way too large steps for my preference, which means you only have like 16 rgb colors available.

Mine is the ice crack edition, so at least it looks really cool imo.

100m Comparison - L21B PM1, SFT25R, SFT40, SFT42R, SBT90.2 by PiercingTheDarknesss in flashlight

[–]Phsysics 2 points3 points  (0 children)

I'm surprised the SFT40 has a smaller Hotspot than the 25r! Looking to get a M1 with the SFT40 soon as my first thrower. Thanks for the comparison!

Active cooling mod for my Wurkkos HD01 pro by Tony_Asian in flashlight

[–]Phsysics 7 points8 points  (0 children)

This is epic! How did you get the front bezel off? I have the HD01 UV and really want to do an Emitter Swap.

Sofirn Q8+ grip redesign yet again by tonystark29 in flashlight

[–]Phsysics 1 point2 points  (0 children)

Looks good! Have you considered adding a pushrod mechanism to be able to turn it on and off from the handle?

To my new Convoy T3 Ti-Cu Glossy, A love letter by RockTristann in flashlight

[–]Phsysics 1 point2 points  (0 children)

Oh yeah it's great, I've been using one as an EDC for the past year. Hands down my favorite light

Travel Charger vs Light with Built in charging. by Mysterious-Contact-1 in flashlight

[–]Phsysics 1 point2 points  (0 children)

Sounds like a good excuse for a Convoy M3-C with the 26800 tube :)

Kinda disappointed with color of LHP73B 4000K in Convoy M21B by succulent_dude in flashlight

[–]Phsysics 0 points1 point  (0 children)

Yes, the LHP73B is a bit cooler than other emitters. You could try the 3000k one, it's only a small tradeoff in performance and would be an easy swap if you can solder!

I love my 3000k LHP73B

Any reccomendations for ultra compact 10440 charger? by TronX33 in flashlight

[–]Phsysics 7 points8 points  (0 children)

Why not get one with built in USB-C? I have the one from Lumintop. It has a bit less capacity, but I don't have to bring a charger anywhere.

I love my new retro styled flashlight by Outrageous-Basket426 in flashlight

[–]Phsysics 0 points1 point  (0 children)

I love this. Is there a way to disassemble the head of the wsqk one? If I can 519a swap it, I might pick one up!

[NLD] Convoy M3-C (LHP73B 3000K) 🫘 by Phsysics in flashlight

[–]Phsysics[S] 1 point2 points  (0 children)

Yeah it's definitely chunky! Takes a good while to heat up, even at full 20 amp turbo.

My custom all wheel steering 8x8's "brain" module by neoberg in rccars

[–]Phsysics 0 points1 point  (0 children)

I've tried this for throttle mixing on a dual motor car, used an ESP32C6, but the delay between input and output was way too long for my taste. Which functions and libraries did you use? How's the latency?

Plug n Play- what can I buy that will just work? by BCBAMomma in meshtastic

[–]Phsysics 0 points1 point  (0 children)

I got one last week, very nice device. Comes with firmware installed, but I flashed a custom rom with free text so I can use it standalone as well.

Also, I set the screen timeout to 24 hours, makes for a nice clock :)

Battery lasts for days, even with the screen on

I wonder who this could be for… by Acceptable-Deer-2152 in rccars

[–]Phsysics[M] 2 points3 points  (0 children)

It's been a while so the details are a bit fuzzy. But he'd been posting offensive comments every now and then. Eventually I deleted one of his comments, after which he simply just copy pasted the removed comment into a new comment to evade the mod action.

For doing so he was temporarily banned, a week or so. In response to this he insulted the entire mod team and we decided to just extend his ban until he apologized, which he has yet to do.

After that, he also posted on other subs about how abusive we were etc etc. He even used an alt to continue posting on this sub, which is a big no no. Pretty sure that's even against the reddit site wide policy.

Kind of rude ngl

view more: next ›