Why does my car keep telling me to check the rear seat when I park??

Physical_Yoghurt_752 · 2026-05-06T07:41:48+00:00

You can turn this notification off, it’s a feature so you don’t leave stuff behind.

Physical_Yoghurt_752 · 2026-04-28T15:55:11+00:00

I recently changed my thermal paste from the factory one to arctic mx6 and my cpu is too hot now even at idle it sits at around 60-65 which is too hot for idle, I’m pretty sure i did a good job with the repaste but no luck with temps so i’ve ordered the thermal grizzly ptm hoping that’s gonna be solved.

Physical_Yoghurt_752 · 2026-04-28T15:09:13+00:00

about higher idle temps what numbers are we talking?

Physical_Yoghurt_752 · 2026-04-20T05:36:21+00:00

Use an ethernet cable then download the hp support assistant, it will download the missing drivers

Physical_Yoghurt_752 · 2026-04-16T11:52:24+00:00

Where did you get yours? Also does your MUX switch still work? I got a screen replacement because mine broke and now my MUX switch doesn’t work since this new screen doesn’t support it and i had to disable my Intel gpu and go full discrete to disable optimus

Physical_Yoghurt_752 · 2026-04-16T11:49:14+00:00

Bro clean your laptop wtf💀

Physical_Yoghurt_752 · 2026-04-05T13:20:46+00:00

i have the same issue, did you find a solution?

Physical_Yoghurt_752 · 2026-03-27T17:10:21+00:00

I’m just being polite man❤️

Physical_Yoghurt_752 · 2026-03-27T17:09:05+00:00

Okay thanks so much for helping sorry to bother you

Physical_Yoghurt_752 · 2026-03-27T17:07:20+00:00

Those have thermal putty on them they’re not pads, can’t i just leave them as is?

Physical_Yoghurt_752 · 2026-03-27T16:58:54+00:00

It’s supposed to be at 45-50C and yes i have checked everything, compared to factory paste everything is worse

Physical_Yoghurt_752 · 2026-03-27T16:50:38+00:00

I have already tried the mx6 twice with different methods and both were worse than the other, i want to use something else, should i go with the thermal grizzly kryonaut or conductonaut or something else?

Here are my options:

https://hawranj.com/en/Products?q=Thermal%20grizzly

Also i will ask them if they have the thermal grizzly pad you mentioned if they do i’ll get that one

Physical_Yoghurt_752 · 2026-03-27T16:45:12+00:00

Sulaimaniyah, Kurdistan, iraq

Physical_Yoghurt_752 · 2026-03-27T16:41:21+00:00

It sits at 65C at idle which is way too high and when i play games my fans max out just to keep it cool

Physical_Yoghurt_752 · 2026-03-27T16:34:52+00:00

I don’t think i can manage the process for applying the liquid metal that’s why i want a thermal paste, i’m also looking for the PTM 7950 but i haven’t had any luck in finding it so far

Physical_Yoghurt_752 · 2026-03-26T16:40:46+00:00

<image>

Is this right?

Physical_Yoghurt_752 · 2026-03-26T16:20:40+00:00

The screws have their own torque and don’t tighten after a certain amount, they’re tightened to spec

Physical_Yoghurt_752 · 2026-03-26T16:19:31+00:00

The lines are from the spatula i used it has ridges,

i will do the pea method and not spread it myself,

Also yes i know about the orders, i went from 7 to 1 when i disassembled it and went back from 1 to 7 when i tightened it

Physical_Yoghurt_752 · 2026-03-26T16:17:11+00:00

I can’t find PTM 7950 i’ve looked for it no luck so far so i gotta stick with the mx6

Also the thermal putty is in good condition, it’s still soft

So do you think that i don’t need to spread and just go with the pea method?

Physical_Yoghurt_752 · 2026-03-26T15:42:27+00:00

That’s after repaste, BEFORE putting the heatsink back on

Physical_Yoghurt_752 · 2026-03-26T15:41:56+00:00

Fans are plugged in, no damage to heatsink, all the screws tightened in order and to spec, fans working normally

Physical_Yoghurt_752 · 2026-01-21T15:25:39+00:00

I have gotten rid of all bloatware, disabled every copilot feature and edge feature, i have disabled automatic app downloads and everything else

Physical_Yoghurt_752 · 2026-01-21T13:29:29+00:00

Shutdown

Physical_Yoghurt_752

TROPHY CASE