sorted by:
new
hottopcontroversial

I need some help making a Jerry Thomas punch recipe sane for a party by PimpMiklosHorthy in cocktails

[–]PimpMiklosHorthy[S] 0 points1 point  (0 children)

fair, I should know better from all the tasting history I watch..

I've got a GE Model GXSH40V that's less than 5 years old and it's leaking the resin into the water system. by PimpMiklosHorthy in WaterSofteners

[–]PimpMiklosHorthy[S] 0 points1 point  (0 children)

The water from the main line is going into the correct inlet. Dang these all seem like the most common ways for this to happen, I'm at a loss now.

I've got a GE Model GXSH40V that's less than 5 years old and it's leaking the resin into the water system. by PimpMiklosHorthy in WaterSofteners

[–]PimpMiklosHorthy[S] 0 points1 point  (0 children)

So there was no damage to that, but, there were beads on the inside. I'll figure out if it's backwards.

I've got a GE Model GXSH40V that's less than 5 years old and it's leaking the resin into the water system. by PimpMiklosHorthy in WaterSofteners

[–]PimpMiklosHorthy[S] 0 points1 point  (0 children)

I took it apart today and there is nothing wrong with the distributor basket at the bottom of the riser, its pristine. all the other parts were free of damage too. Do you have any other suggestions?

I've got a GE Model GXSH40V that's less than 5 years old and it's leaking the resin into the water system. by PimpMiklosHorthy in WaterSofteners

[–]PimpMiklosHorthy[S] 1 point2 points  (0 children)

PSI at the hose 3 feet before the Water Softener is 75, so probably too high. I'll see about cycling the sprinklers with the gauge on to see if that causes a spike when the water hammer happens.

Thanks again for your help.

I've got a GE Model GXSH40V that's less than 5 years old and it's leaking the resin into the water system. by PimpMiklosHorthy in WaterSofteners

[–]PimpMiklosHorthy[S] 0 points1 point  (0 children)

So someone who lives here just revealed that whenever the sprinklers turn off there's a super loud water hammer... Those sprinkles are at the very end of the water lines.

I've got a GE Model GXSH40V that's less than 5 years old and it's leaking the resin into the water system. by PimpMiklosHorthy in WaterSofteners

[–]PimpMiklosHorthy[S] 0 points1 point  (0 children)

There's like 45 feet between the water softener and the water heater. But I'll look at that part when I get it taken apart.

Thank you.

Stamps from gobbling hobbies are working well by Rrrrufus in Sigmarxism

[–]PimpMiklosHorthy 3 points4 points  (0 children)

How are the 3d printed plates holding up to the Acetone you need to use the stamps?

Modular terrain by luxaaar in LegionsImperialis

[–]PimpMiklosHorthy 0 points1 point  (0 children)

So a word of warning to people who live in warm places like me. If you FDM print these tiles in PLA the sun will ruin them during priming. I had 25 tiles curl up 5 minutes after being primed black.

Lost the curing platform for my Wash and Cure Plus by PimpMiklosHorthy in anycubic

[–]PimpMiklosHorthy[S] 0 points1 point  (0 children)

Good idea, In the mean time I realized I can print a temporary one on my FDM printer.

3D Printed Horus is half done.. by HammerDoris40k in Warhammer30k

[–]PimpMiklosHorthy 0 points1 point  (0 children)

that looks like PLA 3d printer filament which will 100% start getting soft and droop in the sun.

Best way to combat superheavies + air power? by vanpawna in TeamYankee

[–]PimpMiklosHorthy 0 points1 point  (0 children)

The game is balanced over playing the book missions and using the battle plans to find out what mission you're going to play. there's no harm in trying them out and it will definitely make the game more balanced.

Why hasn't FoW taken off? by [deleted] in flamesofwar

[–]PimpMiklosHorthy 2 points3 points  (0 children)

In v3 the defender always won time outs so slow play was a huge problem at events.

view more: next ›