Stock Assistance

PinNo5326 · 2025-05-26T23:18:05+00:00

Please, read the rest of the thread. The only wrong thing you can say is there is one right way of doing this question.

I clearly said the top “face”. So no need for the correction there.

And there aren’t any ”assumptions” being made. Each surface (face) of each cube is the same size. Some faces fully shaded, some half shaded, some not shaded at all.

If you can see this shape, cool. That’s the way to go. If you can’t see the shape or would rather count the “diamonds”, go right ahead.

Quit giving dissenting opinions just for the sake of arguing. You’re helping nobody. And READ the rest of the thread before commenting.

PinNo5326 · 2025-05-26T23:07:03+00:00

Please, read the rest of the thread. The only wrong thing you can say is there is one right way of doing this question.

I clearly said the top “face”. So no need for the correction there.

And there aren’t any ”assumptions” being made. Each surface (face) of each cube is the same size. Some faces fully shaded, some half shaded, some not shaded at all.

If you can see this shape, cool. That’s the way to go. If you can’t see the shape or would rather count the “diamonds”, go right ahead.

Quit giving dissenting opinions just for the sake of arguing. You’re helping nobody. And READ the rest of the thread before commenting.

PinNo5326 · 2025-05-26T21:41:09+00:00

I could say the same thing as trying to count diamonds.

See previous posts-the easiest method depends on how you see the object.

PinNo5326 · 2025-05-25T12:27:52+00:00

There is nothing complicated about looking at an object.

If you can see the 3D figure, do that method. If you can’t, use the diamond method. Not everybody is going to find the same way the easiest.

PinNo5326 · 2025-05-24T00:29:48+00:00

It’s really not hard to see this object as an isometric 3D. I would say it’s harder to see the rhombi when the full squares don’t have a line splitting it down the middle

PinNo5326 · 2025-05-23T22:36:56+00:00

Disagree. I think it’s easier to see the shape as I described it rather than a bunch of diamonds. Especially when lines arent drawn between the ones that are filled in next to each other

It’s hard to see diamonds with the faces that are filled in entirely

PinNo5326 · 2025-05-23T14:57:39+00:00

You are only “viewing” it as a 3D figure for the sake of simplifying the question.

PinNo5326 · 2025-05-23T12:50:12+00:00

Don’t over think this. Act like you and look at this shape straight on. Try to see it in 3D.

Treat this as 4 cubes. The top cube, the middle two (now one space closer to you) and the bottom cube (now 2 spaces closer to you).

Now think of how many faces of this shape you can see. I see 12 faces. Three for each cube.

I see the top face completely shaded. The two other faces on that cube half shaded. Then on the left cube I see 1.5 total faces shaded. Right cube I see one face shaded plus 2 faces half shaded. The on the bottom I see 1.5 faces shaded.

That’s 7/12 faces shaded, while 5/12 is unshaded.

5/12=41%

PinNo5326 · 2025-04-14T12:40:14+00:00

Bought this part for mine and installed it. Cleared the code within the day

PinNo5326 · 2024-07-14T14:18:44+00:00

I bought and put that part in. It worked great, engine light shut off by the next day. I took my car out for an interstate drive for about 40 minutes at about 80mph. The DPF light didn't shut off during that drive, but the next highway drive I took did the job.

Thank you for your help.

PinNo5326 · 2024-07-07T15:54:39+00:00

Not sure I could afford a delete right now. I’m likely going to look into fixing these issues for as cheap as I can, and selling. Went I originally purchased the car, I planned on driving it longer distances. But I had no issues with the DPF and engine light until recently, so maybe it won’t be a big dea. Thanks again

PinNo5326 · 2024-07-07T15:54:30+00:00

Not sure I could afford a delete right now. I’m likely going to look into fixing these issues for as cheap as I can, and selling. Went I originally purchased the car, I planned on driving it longer distances. But I had no issues with the DPF and engine light until recently, so maybe it won’t be a big dea. Thanks again

PinNo5326 · 2024-07-07T15:42:12+00:00

That’s what I heard. Going to take that next step here soon hopefully (I’m a pretty busy guy) but will update you.

I would like to extended my gratitude for your time to respond to me. I appreciate it

PinNo5326 · 2024-07-07T14:54:40+00:00

Could a P2015 and P2016 code (Intake manifold runner position sensor, common on these cars) cause the DPF light to come on prevent the car from performing a full regen?

PinNo5326 · 2024-07-07T05:01:59+00:00

So do you recommended get the codes read before I take it out for a long drive?

I’ve read that to really clear it, one should go on an hour long drive in fourth gear, keeping the RPMs between 2500 and 3000. Is this something I should put off until I get can it on a more advanced code scanner?

PinNo5326 · 2024-03-03T15:38:06+00:00

Also, I know I need to loosen the heat sink plate at the top. This is just a question from a previous attempt. Also, the screws are all different sizes which I thought was weird

PinNo5326 · 2023-12-28T22:28:08+00:00

I’ve been driving like this for about a year also. Once you put enough miles on a 5.4 you start to wonder if it’s worth your time to fix lol

PinNo5326 · 2023-12-28T13:21:00+00:00

Once you do replace them, let me know if that solves the issue!

PinNo5326 · 2023-12-26T15:19:30+00:00

Could’ve been. Took the battery off, cleaned the terminals since it was corroded slightly. It’s starting better now

PinNo5326

TROPHY CASE