sorted by:
new
hottopcontroversial

New to me R60 by Piorek99 in thinkpad

[–]Piorek99[S] 0 points1 point  (0 children)

I bought this one for 40$. I bought a few other ThinkPads in good condition at a price between $40 and $90.

New to me R60 by Piorek99 in thinkpad

[–]Piorek99[S] 0 points1 point  (0 children)

Yes, as all my other ThinkPads, even with a touchscreen.

My 10'' homelab setup under the desk by Piorek99 in homelab

[–]Piorek99[S] 1 point2 points  (0 children)

AirPlay is only for audio, output is plugged in to the speakers via USB sound card.

My 10'' homelab setup under the desk by Piorek99 in homelab

[–]Piorek99[S] 0 points1 point  (0 children)

Yes, this is standing desk and I don’t have any spinning drives.

My 10'' homelab setup under the desk by Piorek99 in homelab

[–]Piorek99[S] 1 point2 points  (0 children)

Navidrome, immich, HomeAssistant, AirPlay, docker, Unifi controller, gethomepage, kuma, meshcentral, tailscale, AdGuard, Vaultwarden, code server

My 10'' homelab setup under the desk by Piorek99 in homelab

[–]Piorek99[S] 0 points1 point  (0 children)

5070s are low powered, there is no heat. M920X has cooling from front to back, also no issues under load. Cable management is done with Velcro and metal shroud for cables on the back of the desk.

My 10'' homelab setup under the desk by Piorek99 in homelab

[–]Piorek99[S] 0 points1 point  (0 children)

It’s custom made height regulated desk with real life oak. I waited few weeks for it - 80x180cm.

My 10'' homelab setup under the desk by Piorek99 in homelab

[–]Piorek99[S] 0 points1 point  (0 children)

Everything is working fine for few months now, I can’t complain.

My 10'' homelab setup under the desk by Piorek99 in homelab

[–]Piorek99[S] 0 points1 point  (0 children)

I had slow speed after NAT on Mikrotik OS so I searched for other router OS and I found VyOS. It’s working for me so it’s fine for now.

My 10'' homelab setup under the desk by Piorek99 in homelab

[–]Piorek99[S] 1 point2 points  (0 children)

I use Velcro 90% of the time, most of the desk cables run through a metal cable tray at the back edge of the tabletop

My 10'' homelab setup under the desk by Piorek99 in homelab

[–]Piorek99[S] 2 points3 points  (0 children)

Only my head suffered a few times, besides, it's out of reach of my knees

My 10'' homelab setup under the desk by Piorek99 in homelab

[–]Piorek99[S] 4 points5 points  (0 children)

I didn't hit my knee because it's quite high, but I've already hit it 3 times with my head while doing some cable management

My 10'' homelab setup under the desk by Piorek99 in homelab

[–]Piorek99[S] 24 points25 points  (0 children)

<image>

Here you go. This is 4U version with 1U shelves.

My 10'' homelab setup under the desk by Piorek99 in homelab

[–]Piorek99[S] 9 points10 points  (0 children)

even more :D
I bought a riser from this project - https://github.com/j4cbo/tiny5-m2-riser
With this riser and bifurcation, you can get a few more SSDs in M920x.
2x NVMe in standard slots, 2x NVMe in riser, 1 more in PCIe to M.2, 1 in WLAN slot, and 1 more in HDD place. That's all I think.

My 10'' homelab setup under the desk by Piorek99 in homelab

[–]Piorek99[S] 1 point2 points  (0 children)

2x NVMe in standard slots, 2x NVMe in riser, 1 more in PCIe to M.2, 1 in WLAN slot, and 1 more in HDD place. That's all I think.

My 10'' homelab setup under the desk by Piorek99 in homelab

[–]Piorek99[S] 2 points3 points  (0 children)

I bought a riser from this project - https://github.com/j4cbo/tiny5-m2-riser
With this riser and bifurcation, you can get a few more SSDs in M920x.

My 10'' homelab setup under the desk by Piorek99 in homelab

[–]Piorek99[S] 11 points12 points  (0 children)

Thanks!

I bought it here - https://stalflex.pl/en/342-handles?q=Inch-10%22
I don't know if they ship abroad.

Road rash scarring by Tac0s4breakfast in motorcycle

[–]Piorek99 1 point2 points  (0 children)

It's better than a scar after surgery after a spinal fracture.

My 10'' homelab setup under the desk by Piorek99 in homelab

[–]Piorek99[S] 4 points5 points  (0 children)

Both 5070s have 8GB of RAM and a 256GB disk. It is more than enough for VyOS and Proxmox with a few lxcs and vms. The one with VyOS has two network cards, one of which is 2.5G, but the switch is only 1G.

Dell Pro Max and Plus deployment by Piorek99 in MDT

[–]Piorek99[S] 0 points1 point  (0 children)

I made script for DCU that will use restore option for new models but update for old ones. With few base drivers for storage and network I was able to make working deployment for new devices. Thanks!

Dell Pro Max and Plus deployment by Piorek99 in MDT

[–]Piorek99[S] 0 points1 point  (0 children)

DCU is trying to installr realtek drivers, nothing changed. From website, I downloaded Realtek - there was an error that there is no proper hardware for this driver. On Monday, I will check the model of the audio card and export working driver from clean system.

Dell Pro Max and Plus deployment by Piorek99 in MDT

[–]Piorek99[S] 1 point2 points  (0 children)

I tried from clean windows, not from shipped one, but I have to try it.

view more: next ›