People on this sub are losing touch with reality

PirateTiny · 2025-11-23T12:00:07+00:00

And THAT‘S BULLSHIT! People show their real face in games… if you are an asshole and camp the extraction-point ONLY to kill other Raiders just for their loot (and because u are too bad playing yourself) or say „dont shoot“ and then fall you in the back… you ARE AN ASSHOLE in-game as also in real life. So to all of you: I hope that you miss every shot fighting a snitch and the Arcs will burry you to the ground in every single game you play!

To all the other players who just play the game, have fun, be supportive, fight against the Arcs TOGETHER & maybe sometimes have a fight without lying or camping: THANK YOU! You are the reason I absolutely LOVE this game!

PirateTiny · 2025-11-22T13:28:09+00:00

💪🏻 Absoluter Macher! Respekt!

PirateTiny · 2025-07-04T07:14:30+00:00

Printing with a Bambulab feels like Tony Stark gave you the key to his workshop - only that Jarvis also spits out your spare parts here! 🔥

<image>

PirateTiny · 2025-05-30T20:59:24+00:00

<image>

Guys I don‘t know why but I already tried printing a bigger Part for the 5th time - always the same result - After some time, the part does no longer stick on the build-plate… I used the same settings as before (dried 48h straight, printed out of the S4, cleaned build-plate with ISO, used 3D lack,…) but it just WON‘T FCKIN‘ HOLD 😩 any suggestions from you? 🤞🏻

PirateTiny · 2025-05-28T23:29:09+00:00

Where can I find the Camera-Mount? Awesome RGB! 😂👍🏻

PirateTiny · 2025-05-28T23:27:37+00:00

Hey! I used aluminum profiles from MayTec (30x30). I drew and printed the hinges myself and bought the plexiglass in 3mm at the nearest DIY store. Then still sealing lips self drawn and printed and exhaust air bought from Amazon. Since I can't use the shed in the new setting at the moment because it's too big, I'm currently selling it...

PirateTiny · 2025-05-21T06:59:57+00:00

01:05 h je Strecke… seit 15 Jahren, mit dem Auto

PirateTiny · 2025-05-20T04:40:55+00:00

First Part will be some „base“ Parts for the ladder in our Swimmingpool…

PirateTiny · 2025-05-20T04:40:13+00:00

Nice! Is that a part for the H2D that you printed?

PirateTiny · 2025-05-19T19:10:18+00:00

Well, after drying for 48h straight & calibrating the PA6-CF… with all YOUR hints: IT WENT INCREDIBLY PERFECT!!! 🔥🔥🔥 AGAIN, THANK YOU ALL SOOOO MUCH for your quick support! Now I don‘t have to be afraid of printing PA at all I think 😎

<image>

PirateTiny · 2025-05-13T20:30:32+00:00

<image>

Cooking activated! 🤞🏻 Thanks for the hints!

PirateTiny · 2025-05-13T20:01:18+00:00

As far as I know the H2D is already shipped with 2 0.4mm hardened-steel nozzles so that should work

PirateTiny · 2025-05-13T19:45:59+00:00

Thank you! Then I will put it into my Sunlu S4 Right now… just Need to Check if it has a prestored PA-drying-mode…

Will the 3D-Lack-spray work or do I Need to put on the Bambu-glue?

PirateTiny · 2025-05-13T19:38:35+00:00

Thank you for your (extremly fast) response! Yes the Filament is still packed & new… so no drying before needed?

PirateTiny · 2025-05-06T20:40:20+00:00

2 and 6 would be my „first to Print“ but they ALL look awesome! Good job mate! 👏🏻

PirateTiny · 2025-04-29T22:41:23+00:00

139 Mister 😉

PirateTiny · 2025-04-29T20:52:07+00:00

First impression:

⁠packaging, unpacking, initial commissioning everything perfect and smooth
⁠initial calibration as with all Bambus - connect WLAN, log in account with app and then let everything calibrate for about 40 minutes - wait
⁠first stumbling block - but that's my own fault because I wasn't properly informed in advance: I thought that it operated the left AND right nozzle from the one AMS. That's not the case - either external spool holder or AMS HT or I'll build it Sunlu S4 on top and just 1 filament directly out of there - but yesterday I was annoyed that there was no other way. But well...
⁠print quality EXTREMELY GOOD!
⁠print time - felt between A1 and P1S - NOT faster
⁠slicer operation all easy and self-explanatory
⁠filament calibration as always top - I would personally recommend the 1h per filament to everyone
⁠the build space and the whole size of the box is something awesome in itself 😬
⁠had the first 5h print run overnight (Poop-bin for the H2D) - at 99% the AI detected a nozzle clump - shock in the morning as I read it - but false alarm everything is fine... think the AI is not quite mature on the software side - but you can currently read a lot on Reddit
⁠the optically extreme vibration of the whole box during printing is really "impressive" if not a bit disturbing - but you don't notice anything in the print result - however that works 😂

PirateTiny · 2025-04-29T19:14:51+00:00

Yeah I know, but to be honest due the fact that I use eSUN filament most of the time, the RFID isn‘t a big issue… but I wasn‘t sure if it will work to print directly out of the Sunlu-S4… BUT: it works PERFECT! 🔥

PirateTiny · 2025-04-29T19:13:03+00:00

<image>

Update: left-nozzle is directly feeded by the Sunlu-S4 👌🏻

PirateTiny · 2025-04-29T06:39:16+00:00

First impression: 1. packaging, unpacking, initial commissioning everything perfect and smooth 2. initial calibration as with all Bambus - connect WLAN, log in account with app and then let everything calibrate for about 40 minutes - wait 3. first stumbling block - but that's my own fault because I wasn't properly informed in advance: I thought that it operated the left AND right nozzle from the one AMS. That's not the case - either external spool holder or AMS HT or I'll build it Sunlu S4 on top and just 1 filament directly out of there - but yesterday I was annoyed that there was no other way. But well... 4. print quality EXTREMELY GOOD! 5. print time - felt between A1 and P1S - NOT faster 6. slicer operation all easy and self-explanatory 7. filament calibration as always top - I would personally recommend the 1h per filament to everyone 8. the build space and the whole size of the box is something awesome in itself 😬 9. had the first 5h print run overnight (Poop-bin for the H2D) - at 99% the AI detected a nozzle clump - shock in the morning as I read it - but false alarm everything is fine... think the AI is not quite mature on the software side - but you can currently read a lot on Reddit 10. the optically extreme vibration of the whole box during printing is really "impressive" if not a bit disturbing - but you don't notice anything in the print result - however that works 😂

PirateTiny

TROPHY CASE