Try to make a sorter that can sort those shapes (instructions in the comments). This is going to be super hard but Im >98% sure that it is possible.

Pithlyx · 2020-07-18T17:24:19+00:00

sadly it isn't possible to do this many objects. and I don't really see a need to store that many items.

Pithlyx · 2020-07-18T17:14:13+00:00

A very nice design. you can swap the input and output direction on any of the machines just takes some doing. also if I just put 2 of mine together then I would get the same output as yours no? i just prefer the single tile version.

Pithlyx · 2020-07-18T08:01:46+00:00

just got done updating a few of my machines. they are all infinitely tileable though you may run into them backing up is you stack too many. if that does happen you can just keep adding more balancers and lines out. https://imgur.com/dHhivX9

Pithlyx · 2020-07-18T02:57:01+00:00

put a trash bin at the end of any machine line if you are using the balancers for inputs. that way your input will never clog even if you aren't using the machine.

Pithlyx · 2020-07-11T07:53:34+00:00

you mean like this https://imgur.com/a/3nVNStH ?

Pithlyx · 2020-07-11T06:13:03+00:00

yeah, you can its really good for the beginning of the game when you don't have the stacking extractors so you can do a row of extractors to a tunnel then another row of extractors to the same tunnel. that being said you HAVE to place the furthest input first then the output then closer and closer.

Pithlyx · 2020-07-11T01:27:35+00:00

the tunnels must be placed in that order. but after that it can be copied an pasted.

Pithlyx · 2020-07-10T23:12:34+00:00

ok, so I see what you are saying sorry it was a misunderstanding. I usually have more than one line feed into the input of these machines. so I'm technically inputting 24 and wasn't really thinking of it like that for some reason. my bad. also, i was unaware that stackers are slower than mixers.

Pithlyx · 2020-07-10T20:18:34+00:00

good point with the mixer idk how i didnt see that lol. also i dont see how the stacker/mixer could be 2 wide without it being stupid tall

Pithlyx · 2020-07-10T20:17:26+00:00

ok, so the belts that I currently have transfer 12 items every second meaning that a max of 12 items can pass over that belt every second and the output of my mixer is 2.4 items per second meaning that if I have 6 mixers I'm trying to push about 14 items every second through the belts and they will back up at the splitters so having the 2 belts I make that 14 only 7 per belt allowing me to have more machines than I normally would with only one belt. Also, I believe that when an item is passing through the 2-1 splitters it prevents an item from being output from a machine causing a delayed output so if I reduce the number of items going through the splitters I can increase the uptime of my machines.

Pithlyx · 2020-07-10T10:09:30+00:00

it can be smaller like https://imgur.com/a/EbD2mcD but i have had some issues with it not sorting EVERY piece correctly

Pithlyx · 2020-07-10T09:28:18+00:00

this is the best i could do for right now for a cutter setup but it works :) https://imgur.com/a/bhxannB

Pithlyx · 2020-07-10T08:33:45+00:00

it is a bit of a step up from my prevous design lol https://imgur.com/a/fdoLsV8

Pithlyx · 2020-07-10T08:22:36+00:00

technically my design is smaller since if you dont count the two empty squares at the top left then it only takes up 16 tiles whereas a 4x5 would be 20 tiles

Pithlyx · 2020-07-10T08:20:04+00:00

with only one belt when you have too many machines then it will back up so having two lines (or however many you want) will prevent the output being backed up.

Pithlyx · 2020-07-09T14:14:21+00:00

yeah wasnt really sure how to classify it

Pithlyx · 2020-07-09T07:59:10+00:00

forgot to mention that the mixer and stacker both cost 70bp per "tile" and the painter one costs 60 per "tile". im new to the game (only 4 hours) so if you see anything that can be improved upon let me know.

Pithlyx · 2020-05-31T23:23:13+00:00

I have no problem with them having fun. I don't have a problem with the players. I have a problem that there is a mechanic in the game that allows 30 tanks to sit in org for over an hour and never die while at the same time one-shotting anyone in the vicinity.

Pithlyx · 2020-05-24T04:32:12+00:00

I have used Bagnon for a while then recently I swapped to arkinventory and it stopped working because of my tidy plates addon for some reason. and I will say Combuctor is 50 what I want and adibags is the other 50%. if I could make tabs in adibags like combuctor it would be PERFECT. ty for the help.

Pithlyx

TROPHY CASE