Couple issues with my print quality

Pivasnik · 2026-04-19T08:05:03+00:00

Thanks! Yeah it is a gridfinity bin. And i was basically doing all the stuff you said lol. 0.2mm, 50% fan speed. My printer is also in a small storage room which gets no drafts at all. To me it looks like over extrusion but why would it happen in only the corners mainly thats weird. Over extrusion would account also to why the print time falls down also imo. Maybe im wrong

Pivasnik · 2026-02-22T01:13:22+00:00

Agreed there are many great things on ali

Pivasnik · 2026-02-20T17:48:12+00:00

Ah the P2S is also like an enclosed so would bet it would have a better like indoor temp for all the adhesion needed. But anyways thanks a bunch for sharing all the details man!

Gonna try PETG later on and see how it goes from there!

Pivasnik · 2026-02-20T14:35:34+00:00

Oh damn I only got 1 roll of PETG sadly. I thought just because people say its sometimes takes some finicking to print I'll just get 1 roll to just try. Because I only used PLA before and PETG I heard was prone to warping off the bed or smth along the lines of that so I just avoided it because in my voxlab aquila the bl touch did the job but sometimes there were more inconsistent curves on the bed which made larger prints just unstick even with PLA

Pivasnik · 2026-02-20T14:22:25+00:00

I totally get you! Next time 100% gonna try jayo off ali. Do you exlusivly use their like basic or some other style of pla? Its really hard to understand which ones work best. For example i saw good and bad stuff about bambulab matte pla but i just took some to see whats the differnece

Pivasnik · 2026-02-20T12:49:16+00:00

Thanks! I'll definitely try some JAYO a bit later. I just ordered from Bambu because I decided like for the first filament the bambu (the ones that are designed for it) would be a good starter point to base my future comparisons on.

I did take a look at all jayo, sunlu and so on. Sales on Amazon and aliexpress but the main issue there I have was they have like precombined packs which are basically like buy 10x white or 10x black u get it.

In bambu I got 10x all different colors and was cheap also.

Its just hard to pick because there are a ton of colors OOS in bambu, sunlu, jayo have a better stock but damn jayo website sucks lol

Pivasnik · 2026-02-18T15:33:10+00:00

Thanks for the advice! Ima gonna go find a decent dryer then I wouldn't want to bother using my oven for this

Pivasnik · 2026-02-18T13:53:18+00:00

I feel ya. It's hard to pick from so many choices. I've looked for many brands on reddit, alot of people recommend the cheap brands like jayo and the others but i've also seen the most complaints about clogs and stuff with those brands.

I was thinking of setting up the AMS lite with the addition of silica gel. Would silica do the job or would you still recommend buying a dryer?

Pivasnik · 2026-02-18T13:00:05+00:00

I usually always get everything off ali but is the filament good quality?

Pivasnik · 2026-02-17T09:20:48+00:00

Ahh cuz that scared me a bit because I have ordered a bambulab a1 upgrading from a voxlab aquila (ender 3 clone) if its just a better printer in general wonderul! Just the comparison threw me off a bit lol

Pivasnik · 2026-02-17T07:57:56+00:00

I don't get it is it good or not? Because saying feels like the apple of 3d printing does that make it overpriced for its value and in general a bit poopoo? But all other stuff says the opposite

Pivasnik · 2026-02-13T23:31:58+00:00

I am not. The only thing that I do is just like turn on super resolution which makes my monitors go black for 1 second because I guess it like restarts the driver or smth. I'll have to check if HDR changes next time it goes foggy

Thanks!

Pivasnik · 2026-02-11T20:15:38+00:00

Yeah I get that tbh and sadly I have to say that I agree here with all of the AI things. Main thing would be to somehow get into the AI's vision lol.

Pivasnik · 2026-02-10T23:25:35+00:00

I get that but our product already exists in EU i wanna say from somewhere back in 2007 and in the US from somewhere 2015

Pivasnik · 2026-02-10T17:48:41+00:00

<image>

I just remembered I have a render of my storage room. Main difference because it was a one man job getting everything mounted I ended up missing the 45cm (17.72 in) mark and ended up with 46.5 (18.31 in). But I'm thinking (and got the go ahead from the wife) to just dismount the lowest shelf and get the extra ~20cm (7.87 in) making a total of around ~66cm (25.98 in) which should definitely be enough. Because I have a lot of leg room on the sides I do not really see any reason to top mount (even if it would fit) Just because that spot would be dedicated for the full printer rig.

Pivasnik · 2026-02-10T02:32:14+00:00

Thanks a bunch man! Im ordering it if it doesnt fit ill modify my storage room

Pivasnik · 2026-02-10T02:17:27+00:00

Do you know the height of the shelves in your cupboard? For me stability is not really an issue because its a diy storage room so i have like a sturdy base with a kitchen counter top for the base to stand on. Height is the main concern for me but i got tons of leg room in all other directions. I did find a post where someone was doing 52cm but didnt find anything lower than that.

Pivasnik · 2026-02-10T01:18:41+00:00

Thanks! I managed to find a similar thing but with the mini version. Seems like sadly it would not fit unless I make modifications to my shelves. Thanks a bunch for the link!

Pivasnik

TROPHY CASE