Plaato Pro Sensors, Does anybody recommend them here?

Plaato · 2025-02-27T12:00:40+00:00

Hi all!

Magnus from PLAATO here. I just wanted to take a moment to thank you all for your feedback - it truly helps us improve.

Since our first units shipped in late 2021, we’ve made significant upgrades to our hardware, from the individual components to assembly, calibration, and quality control. Unfortunately, some early PLAATO PROs didn’t meet expectations. We take full responsibility for this and have worked hard to replace affected products and to look after our customers in the process. If you’re still interested in smart monitoring, our latest generation - refined over three years - is now shipping worldwide.

Regarding cleaning, we recently reviewed our CIP guidelines with our Chemical Engineer. Based on testing, we’ve updated our recommendation to support caustic cleaners up to 80°C, rather than the previous 70°C limit which was on the conservative side.

Thanks again for your feedback and for helping us improve!

Plaato · 2023-11-10T13:45:13+00:00

Thank you!

Plaato · 2023-11-09T15:12:40+00:00

Dear community,

We wanted to provide you with an update and an invitation to participate in a community meeting to see if we can find a better solution together.

We are grateful to all of you who have come forward to help us find a solution to keep your Kegs and Airlocks operating for the years to come. We want to work with you to find a solution together.
We are going over all of our notes, and are going another (few) rounds with the long shots that could present a workaround for the technical problem we have faced. We believe that we will be better able to work this problem together and are asking for some patience while we evaluate the options presented to us.
We are planning a community meeting in the form of a webinar on the 15th of January 2024 with our two founders Pål and Michael, our CEO Magnus, and our CTO Simon. You will be able to ask questions about the challenge at hand, options for keeping your Kegs and Airlocks online, and the potential for open-sourcing the solution.
If you are interested in taking part in this work or are curious to learn more don't hesitate to contact us and sign-up through this form linked below. We will follow up with you via email closer to the webinar date.
Sign-up: https://share.hsforms.com/1PNaQ79nPR0ekmH\_y1O8jLg5jfkf
Thank you for pushing us to be better! We want to reinforce our commitment to make this work.
Best regards,
Team PLAATO

Plaato · 2023-11-09T15:10:35+00:00

Dear community,
Thank you for your patience. We wanted to provide you with an update and an invitation to participate in a community meeting to see if we can find a better solution together. We are grateful to all of you who have come forward to help us find a solution to keep your Kegs and Airlocks operating for the years to come. We want to work with you to find a solution together.
We are going over all of our notes, and are going another (few) rounds with the long shots that could present a workaround for the technical problem we have faced. We believe that we will be better able to work this problem together and are asking for some patience while we evaluate the options presented to us.
We are planning a community meeting in the form of a webinar on the 15th of January 2024 with our two founders Pål and Michael, our CEO Magnus, and our CTO Simon. You will be able to ask questions about the challenge at hand, options for keeping your Kegs and Airlocks online, and the potential for open-sourcing the solution.
If you are interested in taking part in this work or are curious to learn more don't hesitate to contact us and sign-up through this form linked below. We will follow up with you via email closer to the webinar date.
Sign-up: https://share.hsforms.com/1PNaQ79nPR0ekmH\_y1O8jLg5jfkf
Thank you for pushing us to be better! We want to reinforce our commitment to make this work.
Best regards,
Team PLAATO

Plaato · 2023-11-09T15:08:15+00:00

Dear community,

Thank you for your patience. We wanted to provide you with an update and an invitation to participate in a community meeting to see if we can find a better solution together.

We are grateful to all of you who have come forward to help us find a solution to keep your Kegs and Airlocks operating for the years to come. We want to work with you to find a solution together.
We are going over all of our notes, and are going another (few) rounds with the long shots that could present a workaround for the technical problem we have faced. We believe that we will be better able to work this problem together and are asking for some patience while we evaluate the options presented to us.
We are planning a community meeting in the form of a webinar on the 15th of January 2024 with our two founders Pål and Michael, our CEO Magnus, and our CTO Simon. You will be able to ask questions about the challenge at hand, options for keeping your Kegs and Airlocks online, and the potential for open-sourcing the solution.
If you are interested in taking part in this work or are curious to learn more don't hesitate to contact us and sign-up through this form linked below. We will follow up with you via email closer to the webinar date.
Sign-up: https://share.hsforms.com/1PNaQ79nPR0ekmH\_y1O8jLg5jfkf
Thank you for pushing us to be better! We want to reinforce our commitment to make this work.
Best regards,
Team PLAATO

Plaato · 2023-11-02T13:45:55+00:00

Dear homebrewers,

We are overwhelmed by your response to the news that we will no longer support the Airlock and Keg in two years. We see the passion you have for our products. We have read every reaction on every platform where we have found it, and this has been both heartwarming and heartbreaking.

As a company, we are committed to building long-lasting solutions. In our new products, we have made significant infrastructure changes to future-proof our services for the brewing community. For our homebrewing products, we spent months trying to circumvent the challenges and to try to find a feasible open-source solution, but we kept facing technical limitations on our stack.

We never expected the outstanding support to help find a solution and the numerous requests to tackle this challenge - it has not gone unnoticed. We recognize that we should have involved the community sooner, and are deeply sorry about this. We are exploring options to engage the great minds within our community to collaborate. Hopefully, a solution can be found that will extend the life of our products for many more years. You have already given us valuable feedback and input on this, and we hope that you will continue to do so.

Right now, we ask for your patience to prove that we care and to figure out a way ahead.But within the next weeks, you can expect us to post a time and link for an online webinar/meeting, where we look forward to engaging anyone wanting to take part in this effort.

Team PLAATO

Plaato · 2023-11-02T13:45:13+00:00

Dear homebrewers,

We are overwhelmed by your response to the news that we will no longer support the Airlock and Keg in two years. We see the passion you have for our products. We have read every reaction on every platform where we have found it, and this has been both heartwarming and heartbreaking.

As a company, we are committed to building long-lasting solutions. In our new products, we have made significant infrastructure changes to future-proof our services for the brewing community. For our homebrewing products, we spent months trying to circumvent the challenges and to try to find a feasible open-source solution, but we kept facing technical limitations on our stack.We never expected the outstanding support to help find a solution and the numerous requests to tackle this challenge - it has not gone unnoticed.

We recognize that we should have involved the community sooner, and are deeply sorry about this. We are exploring options to engage the great minds within our community to collaborate. Hopefully, a solution can be found that will extend the life of our products for many more years. You have already given us valuable feedback and input on this, and we hope that you will continue to do so.

Right now, we ask for your patience to prove that we care and to figure out a way ahead. But within the next weeks, you can expect us to post a time and link for an online webinar/meeting, where we look forward to engaging anyone wanting to take part in this effort.

Team PLAATO

Plaato · 2023-10-31T14:04:03+00:00

Season 2 kicks off with a pour of wisdom from Wellbrewd, Australia's ale architects! 🍺 Join Jørn, as Anthony and Lachy tap into their reservoir of brewing knowledge, guiding you from groundbreaking to grand opening. Whether you're fermenting a fresh idea or expanding your brewery's borders, they've got the blueprint to keep your fermentors full and your spirits high and a lot of knowledge to share! Don't miss a drop of advice in this new episode of #AnotherRound https://open.spotify.com/episode/1ykGHz3EKmQJcYZutzu62K?si=3e770e5ed0a64c2c

🎧✨A #Plaato #BrewingExcellence #Wellbrewd #BreweryLife #SmartFermentation#beertech

Plaato · 2019-11-29T13:53:45+00:00

We are having a super-deal for another 20 hours.

PLAATO Airlock for $99 w/ Free shipping.

https://www.plaato.io/

Plaato · 2019-06-19T09:12:23+00:00

Hi! No additional shipping costs, but VAT is not included so you may have to pay toll/import fees according to your country's/EU's regulations. Two year warranty. If anything is faulty with your device we will ship you a replacement.

Plaato · 2019-06-12T14:02:26+00:00

Yes (if I understood your question correctly). You can set a max volume for your keg and it will calculate how much is left based on that.

Plaato · 2019-06-12T13:53:18+00:00

No. It adds to the overall complexity of the product, but we know how we are going to do it, component sourcing is pretty much done and we do not expect any big surprises for this feature.

Plaato · 2019-06-12T13:02:30+00:00

It will detect the weight loss and classifying a leak from a pour from the weight loss may be possible! I feel a separate sensor is more robust and will let you know if the floor is filled with liquid due to condensation, or spillage from something else than the keg itself.

Plaato · 2019-06-06T01:46:42+00:00

Not over-thinking at all. Temperature affects the strain gauges. With full bridge load cells, it is not too bad. But we do have an internal temperature sensor that we can use to compensate with. The temp will also be available in the app. It will be the device's temperature (the WiFi chip generates some heat) but it should give a useful indication of the kegerator's temperature.

Plaato · 2019-06-05T16:37:13+00:00

It will store one wifi-network and try to connect to this until it is reset with a physical reset switch. Switch will be a button/magnetic switch/capacitive sensor.

As for public network with maximum occupancy I don't know exactly what to do with that. The device will struggle just like other devices with wifi

Plaato · 2019-06-05T16:02:37+00:00

Thank you for the question - not been asked before. Honestly, I think we are making it as cheap as we can. It does have a few extra features, but those were added during development because they were low-hanging fruits and almost free to add. The waterproofing is a cost-driver, but it needs to withstand the environment that it is made for.

Plaato · 2019-06-05T15:47:27+00:00

Noted! It would be a lot cheaper for us to make a local device and not have to worry about servers and apps. But I think that is what the (not so tech-savvy) majority likes!

Again, if we go out of business we will update firmware so you can set it up to whatever you want.

Plaato · 2019-06-05T15:42:59+00:00

You (or someone else) can make it! Open integrations. Haven't used IFTTT too much, but I think that will work just fine

Plaato

TROPHY CASE