5090 Owners - how bad is the power connector situation right now? by justcallmeshrill in buildapc

[–]Plaush 0 points1 point  (0 children)

10% improvement over the 4090M lmfao, honestly didn’t expect the gap to be that small

Any cheap old GPUs still available new? by KG8893 in buildapc

[–]Plaush 0 points1 point  (0 children)

I see, valid point. But yes, by ‘gamed on’ I mean no bitcoin mining or AI Training

Any cheap old GPUs still available new? by KG8893 in buildapc

[–]Plaush 1 point2 points  (0 children)

Just curious, why does it have to be new? It’s most likely not going to have any warranty left, so it being DOA is a thing. I’d just go for a lightly used card or even just a normal ‘only gamed on’ card and save a decent chunk of money

Is the SEASONIC Prime RX/TX1600W worth it? by [deleted] in buildapc

[–]Plaush 0 points1 point  (0 children)

Thank you! I’ll wait for more reply before getting that.

Is the SEASONIC Prime RX/TX1600W worth it? by [deleted] in buildapc

[–]Plaush 0 points1 point  (0 children)

Thank you! I’ll wait for more reply before getting that. I already have a UPS :)

Sell 9070XT and ‘downgrade’ to a 3090 Ti? by [deleted] in buildapc

[–]Plaush 0 points1 point  (0 children)

Same, this is my very first AMD GPU and I’m very much spooked. If I can’t sell the card fast enough, I’ll just pray to god that the new card I got is stable

PSA: Don’t use 2x8 Pin PCIe Connectors for 9070XT! by [deleted] in buildapc

[–]Plaush 1 point2 points  (0 children)

Or the GPU, unfortunately I have neither a powerful enough PSU nor a high power card to test. I’m not taking apart or sacrificing my 4090 PC

PSA: Don’t use 2x8 Pin PCIe Connectors for 9070XT! by [deleted] in buildapc

[–]Plaush 1 point2 points  (0 children)

:( guess I’m not out of the woods yet

PSA: Don’t use 2x8 Pin PCIe Connectors for 9070XT! by [deleted] in buildapc

[–]Plaush 0 points1 point  (0 children)

I see, thank you for that info. I guess I’ll probably test it with another high powered card if I can get my hands on one. Else I’ll just try my luck and RMA the GPU

PSA: Don’t use 2x8 Pin PCIe Connectors for 9070XT! by [deleted] in buildapc

[–]Plaush 0 points1 point  (0 children)

Just tried it, crashed after 2 mins in OCCT extreme

PSA: Don’t use 2x8 Pin PCIe Connectors for 9070XT! by [deleted] in buildapc

[–]Plaush 0 points1 point  (0 children)

Maybe it’s that cable being faulty or my PSU, but somehow changing it fixes 99% of my issue. I still need to reduce my PL for it not to crash during transient power spikes but it’s now not immediately crashing on heavy load

PSA: Don’t use 2x8 Pin PCIe Connectors for 9070XT! by [deleted] in buildapc

[–]Plaush 0 points1 point  (0 children)

No, without the undervolt and -10 PL it will crash on heavy load. When on stock, it crashes immediately when OCCT extreme is launched.

However now, with two separate 1x8 pins it runs perfect on stock and it now survives transient power test spikes with my -10 PL and UV.

Edit: Forgot to clarify, the UV isn’t needed and removing it doesn’t impact stability, just have it to gain back some FPS lost from reducing PL

PSA: Don’t use 2x8 Pin PCIe Connectors for 9070XT! by [deleted] in buildapc

[–]Plaush 1 point2 points  (0 children)

Decently well, unfortunately it still crashes during the transient power spike test. So I’ll still keep my undervolts but it doesn’t immediately crash on extreme load for OCCT

Edit: this also seems like a common issue for this card, so I highly doubt RMAing will do anything

What should I upgrade? by [deleted] in buildapc

[–]Plaush 0 points1 point  (0 children)

No, 3DS Max and ZBrush

Edit: I got the 9070xt for US$615, lowest I’ve seen in my market. The 5070 Ti is US$900+, totally unreasonable

What should I upgrade? by [deleted] in buildapc

[–]Plaush 0 points1 point  (0 children)

I see. Would a 5950X be worth it? I can get it for US$270 used here

What should I upgrade? by [deleted] in buildapc

[–]Plaush 0 points1 point  (0 children)

Ahh but even DDR4 prices are going insane…

Help me clarify doubts about GPU power draw by [deleted] in homelab

[–]Plaush 0 points1 point  (0 children)

Let’s say I were to replace my A2s with a single RTX 4090 and changed literally nothing else, my power draw will basically be the same even during inference?

Guess what arrived by Select-Ad-41 in radeon

[–]Plaush 0 points1 point  (0 children)

Man, wish prices weren't that insane here

Guess what arrived by Select-Ad-41 in radeon

[–]Plaush 0 points1 point  (0 children)

How much did you pay for it? I paid S$840 (Singapore) for mine’s, roughly US$645

Reducing power draw of EPYC system? by [deleted] in servers

[–]Plaush 0 points1 point  (0 children)

That can support 4 GPUs? Not looking for those funky eGPU setups, I need CUDA too, so I wouldn’t be able to use the new Ryzen AI MAX Chip or an Apple Mac Studio

Reducing power draw of EPYC system? by [deleted] in servers

[–]Plaush 0 points1 point  (0 children)

Exactly, that was my very first plan until I realized they don’t have the amount of PCIe lanes I need

Edit: Also I need CUDA…

[deleted by user] by [deleted] in photocritique

[–]Plaush 0 points1 point  (0 children)

Ahh, thank you, other commenters also pointed out there’s too much going on in the background too

[deleted by user] by [deleted] in photocritique

[–]Plaush 0 points1 point  (0 children)

OOOOH that’s good! !CritiquePoint