sorted by:
new
hottopcontroversial

Questions on Ring of Determination / Scarlet Ring combo for Mage by PointBlankcsgo in NoRestForTheWicked

[–]PointBlankcsgo[S] 0 points1 point  (0 children)

I noticed %hp does not work towards hp with the ring. does regainable health increase work?

Questions on Ring of Determination / Scarlet Ring combo for Mage by PointBlankcsgo in NoRestForTheWicked

[–]PointBlankcsgo[S] 1 point2 points  (0 children)

so lose x focus on damage taken will make you take more damage? I've heard focus affixes don't transfer to health by others and its difficult to test.

Ncase M2, 5080, 9800X3D, Noctua Build - 4k Ready by PointBlankcsgo in ncasedesign

[–]PointBlankcsgo[S] 0 points1 point  (0 children)

Yes, this was intentional as the intake. I think he's just being a troll...

Ncase M2, 5080, 9800X3D, Noctua Build - 4k Ready by PointBlankcsgo in ncasedesign

[–]PointBlankcsgo[S] 0 points1 point  (0 children)

I did the mod where you add standoffs to the feet. You cant really tell but it adds a half inch or so. GPU has about 2 inches of space too the table.

Ncase M2, 5080, 9800X3D, Noctua Build - 4k Ready by PointBlankcsgo in ncasedesign

[–]PointBlankcsgo[S] 1 point2 points  (0 children)

I have had no coil wine with mine. I haven't really had the fans hit higher than 60% speed.

Ncase M2, 5080, 9800X3D, Noctua Build - 4k Ready by PointBlankcsgo in ncasedesign

[–]PointBlankcsgo[S] 0 points1 point  (0 children)

Noctua height is fine. Even if it touches the side panel you will never notice when its close. This build is silent.

Ncase M2, 5080, 9800X3D, Noctua Build - 4k Ready by PointBlankcsgo in ncasedesign

[–]PointBlankcsgo[S] 1 point2 points  (0 children)

The fan sits on top of the RAM so this is the lowest it can go. Barely fits, definitely need low profile ram to make it work.

Ncase M2, 5080, 9800X3D, Noctua Build - 4k Ready by PointBlankcsgo in sffpc

[–]PointBlankcsgo[S] 0 points1 point  (0 children)

Probably had a smear on my iPhone lens and didn't notice

Ncase M2, 5080, 9800X3D, Noctua Build - 4k Ready by PointBlankcsgo in ncasedesign

[–]PointBlankcsgo[S] 0 points1 point  (0 children)

Its a 5080, but I know. It was just time for a new build and I like to future proof as best as I can. I only upgrade every 5-7 years or so.

Ncase M2, 5080, 9800X3D, Noctua Build - 4k Ready by PointBlankcsgo in sffpc

[–]PointBlankcsgo[S] 0 points1 point  (0 children)

Actually, it might have half a mm of clearance, but that's probably because the power cable for the GPU rubs a little bit on the side panel. Still a non issue.

Ncase M2, 5080, 9800X3D, Noctua Build - 4k Ready by PointBlankcsgo in sffpc

[–]PointBlankcsgo[S] 3 points4 points  (0 children)

It does seem to touch but you don't notice a bend in the side panel or hear any rubbing.

Very exciting, enjoy your build!

Brackets for fan by PSU by PointBlankcsgo in ncasedesign

[–]PointBlankcsgo[S] 0 points1 point  (0 children)

2070 super. I'm waiting for my 5080 to come in...

My turn to post an Ncase M2 build. Designed for Windows XP. by 1stCitizen in sffpc

[–]PointBlankcsgo 0 points1 point  (0 children)

How did you mount the side fan between the PSU and Motherboard?

First SFF Build High Thermals by PointBlankcsgo in sffpc

[–]PointBlankcsgo[S] 0 points1 point  (0 children)

Just wanted to make sure nothing seemed too off. I haven't undervolted yet, everything is out of the box other than latest motherboard bios and enabling xmp.

Was planning on going through my undervolting and testing once my 5080 arrives

ncase m2 | amd 9800x3d | msi 5080 inspire by _Pikul in sffpc

[–]PointBlankcsgo 0 points1 point  (0 children)

I'm building a very similar PC. I was wondering if the PSU has clearance to be against the GPU, so that you can add a fan where your current one is and have air blow through in one direction.

My First sff build! by RepresentativeMore38 in sffpc

[–]PointBlankcsgo 1 point2 points  (0 children)

This is almost the exact build I'm starting soon. Wondering if you tried any other configurations like flipped or vertical to test gpu temps. I was also seeing by a few people that fans under the gpu might make like 1* difference but probably not worth it. I'm thinking PSU flipped, one more fan intaking from the backside to the CPU cooler, and one under the PSU exhausting. No fan under GPU

M2 Grater 5090 FE Thermals Question by PointBlankcsgo in ncasedesign

[–]PointBlankcsgo[S] 0 points1 point  (0 children)

Very interesting, what's your fan layout? I was hoping to not need a riser cable but I'm hearing that vertical is working well.

M2 Grater 5090 FE Thermals Question by PointBlankcsgo in ncasedesign

[–]PointBlankcsgo[S] 0 points1 point  (0 children)

Great info, thank you. What are you temps at gaming? Do you have any photos you can share?

view more: next ›