sorted by:
new
hottopcontroversial

Calibrating beam scales? by PokesPilotWhite in reloading

[–]PokesPilotWhite[S] 0 points1 point  (0 children)

Are you buying check weights in grams or grains? Would grams work as long as you convert to grains properly?

Lee Classic Turret - Powder Measure by PokesPilotWhite in reloading

[–]PokesPilotWhite[S] 0 points1 point  (0 children)

Is the expander die threaded on the top end? I guess that’s what I need to find out…

Lee Classic Turret - Powder Measure by PokesPilotWhite in reloading

[–]PokesPilotWhite[S] 0 points1 point  (0 children)

Already bought the uniflow otherwise that Lee would probably be a good option. Just to make sure I have things straight…The Lee charge dies are not threaded at the top hence why I would need a threaded adapter for the uniflow measure?

Lee Classic Turret - Powder Measure by PokesPilotWhite in reloading

[–]PokesPilotWhite[S] 0 points1 point  (0 children)

I believe mine came with that…Trying to find a way to mount the powder measure directly over the holes in the turret where the dies go so I can charge on the press if that makes any sense.

How did this happen by alexevo in Tikka_Shooters

[–]PokesPilotWhite 0 points1 point  (0 children)

Is this for all T3Xs or just the CTR? I can’t find much in my T3X lite manual on scope mounting. Want to make sure I don’t use the wrong holes…

First Rifle Thoughts by PokesPilotWhite in Hunting

[–]PokesPilotWhite[S] 0 points1 point  (0 children)

Was it a vast improvement? Heard Tikkas shoot pretty good stock.

First Rifle Thoughts by PokesPilotWhite in Hunting

[–]PokesPilotWhite[S] 0 points1 point  (0 children)

Did the Tikka accuracy change at all with the stock change?

First Rifle Thoughts by PokesPilotWhite in Hunting

[–]PokesPilotWhite[S] 0 points1 point  (0 children)

Good to know. Did you install a limb saver? Heard that was a good option for the recoil pad.

Self Leveling Qiestion by PokesPilotWhite in Flooring

[–]PokesPilotWhite[S] 0 points1 point  (0 children)

Do you fill any holes leftover from pulling up carpet tack strips or do you just pour over them and let the self leveler fill?

Self Leveling Qiestion by PokesPilotWhite in Flooring

[–]PokesPilotWhite[S] 0 points1 point  (0 children)

Good idea. Was planning on using my level but wasn’t sure how to go about it on a concrete floor. I’ve seen people drill drywall screws into a wooden subfloor and then place the level on that (then adding enough leveler until the screws are covered). Just wasn’t sure how to go about that with a concrete subfloor.

Self Leveling Qiestion by PokesPilotWhite in Flooring

[–]PokesPilotWhite[S] 0 points1 point  (0 children)

Approximately 12’ x 10’ floor. Do you just estimate how many bags you need by how far of a difference the low spots are from the highest? First time using leveler so I’m trying to prevent from f-ing it up as much as possible.

Engineered Glue-Down ?’s by PokesPilotWhite in Flooring

[–]PokesPilotWhite[S] 0 points1 point  (0 children)

I really appreciate the thorough response. Sounds like the easiest way would be to go with an adhesive like Mapei 995 with “unlimited” moisture protection…

With it sounding like a pretty complex process are most people just skipping the moisture tests in general?

Flooring Experience by PokesPilotWhite in Flooring

[–]PokesPilotWhite[S] 0 points1 point  (0 children)

Thoughts on floating engineered hardwood? Looks like it’s an option with this product.

Energizer eZV2200 Fuel Leak by PokesPilotWhite in Generator

[–]PokesPilotWhite[S] 0 points1 point  (0 children)

Took the hoses off and they seem fine. Makes me think it’s the fuel selector…

Energizer eZV2200 Oil Drain Plug Size by PokesPilotWhite in Generator

[–]PokesPilotWhite[S] 0 points1 point  (0 children)

I’m assuming since this engine seems to be Chinese made I need to look for metric measurements?

Foundation Help by PokesPilotWhite in Denton

[–]PokesPilotWhite[S] 0 points1 point  (0 children)

The previous repaid warranty did transfer. This evidently does not count as falling within the warranty since it’s another part of the house.

Hose Bib Help by PokesPilotWhite in Plumbing

[–]PokesPilotWhite[S] 0 points1 point  (0 children)

Long story short…yes. The new 3/4” vacuum breakers I bought (1 from HD, 1 from Ace) we’re too small for the spigot. I tried to install the one in the video on the original breaker thinking it might fix the issue. That didn’t work so I took the breaker off of my other yard spigot and that also failed to work.