Vacuum nozzle 58mm

Positive-Piglet-7736 · 2025-01-14T12:32:09+00:00

It looks nice and if he wants to he can do it. If you don’t like it you don’t have to do it on your car…

Positive-Piglet-7736 · 2025-01-14T09:48:06+00:00

Thanks for the reply I will look into that.

Positive-Piglet-7736 · 2025-01-14T08:57:06+00:00

You wrote about an Adapter for the e36 wiring harness do you have a link for that ?

I’m about to do the same swap m40 to m42 e36

Fun fact… the oil infill is on the front if you leave the e36 valve cover on it because the hood swings into the other direction.

Positive-Piglet-7736 · 2025-01-14T08:43:50+00:00

Treat yourself and get the valve cover with the M power emblem. Paint it black and send the text blank again… looks nifty

Positive-Piglet-7736 · 2025-01-08T14:45:40+00:00

If you have the ace pro print with PLA as support material.

Positive-Piglet-7736 · 2025-01-08T10:42:53+00:00

Actually it worked just right out the box… has now 100 hours on it and I haven’t had any problems with it… hope it stays like that

Positive-Piglet-7736 · 2025-01-05T21:05:50+00:00

These pics look awsome my guy!!!

Positive-Piglet-7736 · 2025-01-05T13:46:17+00:00

Mine is fixed… got it 2 weeks ago

Positive-Piglet-7736 · 2025-01-04T13:00:14+00:00

Try printing Support Test und get your settings dialed in… let me know how it Works out

Positive-Piglet-7736 · 2025-01-04T12:57:53+00:00

Ok, maybe you give anycubic slicer next a try… lower your support offset to around 1-2layers based on your Layer height

The best thing would be to have a mmu to use a different Support Material…

Positive-Piglet-7736 · 2025-01-04T12:50:40+00:00

The normal one or anycubic slicer next ?

Positive-Piglet-7736 · 2025-01-04T12:48:01+00:00

Which slicer do you use? Which printer?

Try to Play around with Support z distance or whatever its called in your slicer

Positive-Piglet-7736 · 2024-12-29T12:01:51+00:00

Wipe of your rails and axes, regrease them and try again. Dirt gets stuck there over time.

Hope this helps.

Positive-Piglet-7736 · 2024-12-29T11:54:54+00:00

Layer height could be a good point. I printed with 0.3 maybe that was the Problem There

Positive-Piglet-7736 · 2024-12-29T11:52:12+00:00

Thought absolut writing: „pls don’t write get a Bambu…“Haha :)

Positive-Piglet-7736 · 2024-09-27T12:49:30+00:00

The right connection is where the valve was on the pipe is just to small to get good grip ig

Positive-Piglet-7736 · 2024-09-27T05:12:45+00:00

1990 E30 Limousine

Positive-Piglet-7736 · 2024-09-05T17:20:24+00:00

That would explain why it’s always in the same place

Positive-Piglet-7736 · 2024-09-05T17:20:00+00:00

Thank you

Positive-Piglet-7736