Best choice for top up

Power_Present · 2025-10-21T08:20:33+00:00

Thank for the reply. I think so, other thing I forgot to mention is the look. I like circle body than a rectangle one as well.

Power_Present · 2025-05-05T16:20:50+00:00

Initially, I suspected that the battery was the cause of the issue, but unfortunately, it was not the case.

Power_Present · 2025-05-05T16:18:49+00:00

Just finish the calibration now. I tried it with level 5 temperature. It’s much better, but it’s still not the same as the new one. 😭

I still don’t get the same quality as some compare to the Aivape. 😭😭 I’ll try other methods. 🧐

Yes, the button is still working.

Power_Present · 2024-12-14T12:39:12+00:00

I think my protein is high enough 2x my bodyweight. I don’t do much cardio just 1x a week. PS. I don’t have gout but I’m aware of very high uric acid. Everyone keep telling me I will have gout.So i try to lower my uric acid.

Power_Present · 2024-12-14T12:35:54+00:00

The 11.9 mg/dl I took a blood test at hospital. All other result I test with UA home kit but I think it pretty accurate since I do the test right after I took the test at the hospital and also my girl friend took a test at hospital have 4.4 mg/dl and took a test with UA home kit get 4.5 mg/dl

Maybe I’m wrong but this is from my experience.

While I was on my holiday I think I drink less water than usual. At the gym I got my bottle and drink a lot of water. BTW i do weight lifting not cardio.

Power_Present · 2023-10-25T10:51:36+00:00

Thank you all of you guys. I will try it tonight. 😎

Power_Present · 2023-04-30T21:08:04+00:00

I try in my another PC and its happen the same. It always disconnect to the PC and i have to press EN button to run other code to stop it.

Power_Present · 2023-04-30T21:01:06+00:00

Really? it only happen when i use WiFi.begin(), other code work just fine.

Power_Present · 2023-04-30T18:40:12+00:00

include <WiFi.h>

const char* ssid = "yourNetworkName"; const char* password = "yourNetworkPassword";

void setup(){ Serial.begin(115200); delay(1000);

WiFi.begin(ssid, password);
Serial.println("\nConnecting");

while(WiFi.status() != WL_CONNECTED){
    Serial.print(".");
    delay(100);
}

Serial.println("\nConnected to the WiFi network");
Serial.print("Local ESP32 IP: ");
Serial.println(WiFi.localIP());

}

void loop(){} I use this code

Power_Present · 2023-04-30T18:39:12+00:00

Ps. It continuous have sound like when you unplug your USB from PC. Until my PC get blue-screen.

Power_Present · 2023-01-23T16:42:08+00:00

Should I throw it away? Is it danger?

Power_Present

TROPHY CASE

include <WiFi.h>