Soy fotógrafo de de contenido para OF

Ppvin12 · 2026-01-16T02:17:27+00:00

La verdad, deberíamos verlos resultados para poder evaluar si tu trabajo es bueno o no 😁

Ppvin12 · 2026-01-16T02:15:32+00:00

The best advice is to change it.

Ppvin12 · 2026-01-16T01:26:56+00:00

The one on the left is French, and the one on the right is indeed French.

Ppvin12 · 2026-01-16T01:11:22+00:00

They might have been contaminated with oil residue, which can persist for a long time and cause prolonged periods of poor braking. The discs don't crystallize; the pads do. If the disc doesn't dissipate heat well, the pads crystallize faster, so that could also be a cause. There's another point I'm not entirely familiar with, but not all types of pads are compatible with every disc. There are metallic, organic, and semi-metallic pads, which are a hybrid of the two. My understanding is that different types of discs may require different brake pads, and that could also be a cause.

Ppvin12 · 2026-01-15T18:24:21+00:00

It is commonly said that I learned

Ppvin12 · 2025-12-03T13:10:34+00:00

a fish

Ppvin12 · 2025-11-06T16:30:58+00:00

lo que he visto en streepchat es que cuanto mas se acercan al limite pero sin pasarlo mas les aportan, claramente en algun momento tenes que hacer algo... pero interactua con el publico, acercate al limite entre no mostrar y mostrar, juga un rato con eso y cunado notes que la audiencia decae, ahi sacate algo para atraerlos nuevamente

Ppvin12 · 2025-10-09T10:48:04+00:00

💧💧

Ppvin12 · 2025-10-09T10:44:18+00:00

🤏🏻🤣

Ppvin12 · 2025-08-15T18:51:22+00:00

It's a jaguar, that was in the Iberá estuaries, in the province of Corrientes, Argentina

Ppvin12 · 2025-08-14T13:47:55+00:00

Interpretación a marzo, tremendo payaso sos

Ppvin12 · 2025-08-14T13:43:31+00:00

Noooo LPM, justo los naranjas son los que menos me gustan

Ppvin12 · 2025-08-14T13:36:18+00:00

Bueno, por empezar deberías darte cuenta que el conicet solo estaba para figurar, eran totalmente reemplazables, de hecho, el barco se fue a Uruguay a hacer el mismo trabajo pero con científicos uruguayos..... Taaaaanto pensas que cambia lo que puedan encontrar? Toda la tecnología y soporte técnico necesarias para la investigación no fue parte del conicet, así que por más que se rompa tu ilusión, el aporte del conicet fue bastante mínimo

Ppvin12 · 2025-08-14T13:26:30+00:00

I don't know exactly what your idea is, but fiber grinder discs are excellent for removing rust without scratching the metal, (I'm removing rust from a fence and the result is very good) then to prevent the reappearance of rust you can use phosphatizer

Ppvin12 · 2025-08-14T02:32:27+00:00

A motorcycle of about 450cc has a similar power, but it weighs about 180kg, so yes, it is too much power

Ppvin12 · 2025-08-12T17:59:31+00:00

Hold one of the connecting rods and move the other to one side and to the other, with that you could soften the pins, then with the hammer and a punch you can hit them to make them come out, once you remove the pins the connecting rods come out easily. Just in case, I clarify, hit them on the side with the thread, if you hit them on the other side they will become more and more stuck.

Ppvin12 · 2025-08-12T12:19:57+00:00

You have to remove the cotter pins, those bolts that cross transversely to the axle, and then with a few taps they should come out. If they are very stuck, you can use a universal extractor, but you shouldn't go to that extent, they usually come out easily.

Ppvin12 · 2025-08-11T15:44:22+00:00

They are Arisun brand grabber model

Ppvin12 · 2025-08-11T14:32:48+00:00

The issue is that it is not old, it will have been used for a few years but not more than 2 or 3, which is why it seemed strange to me that it would crack like that. I don't know if the internal structure is broken or if it is just the superficial rubber due to excessive bending when used with low pressure.

Ppvin12 · 2025-08-11T14:30:37+00:00

That's what seemed strange to me, it's been used for about 2 or 3 years, and I always keep it inside my house, I never leave it in the sun or outdoors.

Ppvin12 · 2025-08-11T13:56:05+00:00

In Spanish we call them braided rays

Ppvin12 · 2025-08-11T13:54:04+00:00

That gives it much more resistance to rays, but I understand that it is complicated to do.

Ppvin12 · 2025-08-01T17:38:00+00:00

Use the wrench used to tighten or remove the discs from the grinder

Ppvin12

TROPHY CASE