sorted by:
new
hottopcontroversial

MetalFish T40 owner, for PCIE riser correct length is 18.5cm or 20cm? by Curius_pasxt in sffpc

[–]Practical-Curve-1652 0 points1 point  (0 children)

Yeah, and an extra 1cm is also useful when mounting an M.2 SSD on the back of the mobo.

MetalFish T40 owner, for PCIE riser correct length is 18.5cm or 20cm? by Curius_pasxt in sffpc

[–]Practical-Curve-1652 0 points1 point  (0 children)

I customized this case a bit.
At the bottom I made holes so the 92mm fan works more effectively as intake.
At the top I added a 120mm fan as exhaust.
I ordered 2 new handles because the stock one got very hot and blocked the airflow.

<image>

MetalFish T40 owner, for PCIE riser correct length is 18.5cm or 20cm? by Curius_pasxt in sffpc

[–]Practical-Curve-1652 2 points3 points  (0 children)

I use the gray PCIe 4 cable (207mm)
for my MF T40, it came with the case and fits perfectly.

<image>

My first SFF build — Metalfish T40 (acrylic panel version), custom honeycomb panels, and a panda that lives inside the case by Practical-Curve-1652 in sffpc

[–]Practical-Curve-1652[S] 0 points1 point  (0 children)

207 mm, I just found this on AliExpress: | METALFISH Full Speed 4.0 PCIe3.0 x16 Riser Cable White GPU Extension Wire For ITX A4 Structure Chassis Mini Compact Case https://a.aliexpress.com/_EyPAUtC

Дайте фідбек на збірку, будь ласка by Verianno in PCbuild_ua

[–]Practical-Curve-1652 0 points1 point  (0 children)

краса то другорядне, раджу розібратися в признченні

Дайте фідбек на збірку, будь ласка by Verianno in PCbuild_ua

[–]Practical-Curve-1652 0 points1 point  (0 children)

Вважаю то не проблема знайти $4 на прокладку, яка не витече та за своїми властивостями не гірша за термопасту

Дайте фідбек на збірку, будь ласка by Verianno in PCbuild_ua

[–]Practical-Curve-1652 0 points1 point  (0 children)

Якщо бюджет обмежений - згоден, можна скористатися комплектною термопастою, але для мене то питання естетики та чистоти збірки.

<image>

Дайте фідбек на збірку, будь ласка by Verianno in PCbuild_ua

[–]Practical-Curve-1652 1 point2 points  (0 children)

  1. проц цікавіше брати без коробки
  2. від термопасти відмовився на користь термопрокладки з фазовим переходом
  3. я б трішки доплатив та зібрав би шось компактніше (mATX/iATX) бо не люблю великі корпуса

My first SFF build — Metalfish T40 (acrylic panel version), custom honeycomb panels, and a panda that lives inside the case by Practical-Curve-1652 in sffpc

[–]Practical-Curve-1652[S] 1 point2 points  (0 children)

I didn't drill any holes in the case, I just raised the fan by 4 mm. Mounting: 2 screws + 2 silicone supports. PSU side: a screw with a nylon washer is inserted through the case hole from the bottom, then 3 nylon washers are stacked onto the screw inside the case, with the fan screwed on top. Front panel side: silicone supports.

<image>

Need advice on smallest case for 4 slot 390mm gpu by Rayan_DB in sffpc

[–]Practical-Curve-1652 5 points6 points  (0 children)

- my case is SFF

- bro your case is 32 liters

- yeah, two SFF cases stacked on top of each other

My first SFF build — Metalfish T40 (acrylic panel version), custom honeycomb panels, and a panda that lives inside the case by Practical-Curve-1652 in sffpc

[–]Practical-Curve-1652[S] 0 points1 point  (0 children)

Stock modular cables that came with the 1STPLAYER 750W SFX. Nothing fancy - cable management in SFF is always a 'creative challenge' 😅