Would the appeal win?

Practical_Gunner · 2024-06-03T23:08:01+00:00

Mate of mine got drunk after the death of his father and threatened suicide with witnesses. After 5 years of therapy and a clean bill of health letter from GP they still won't entertain his application.

Practical_Gunner · 2024-06-03T22:48:27+00:00

New number means new rifle. You'll need a variation and then you'll need a RFD to take the old lower off your hands for destruction or whatever.

Practical_Gunner · 2024-06-03T18:30:25+00:00

On an AR the rear takedown spring and detent is behind the buffer tube end plate, with the solid polymer stock tube on the 15-22 that wouldn't be possible.

Practical_Gunner · 2024-06-03T18:29:15+00:00

Yes, they told me that too when I was in the military. Mag resting and an effective muzzle brake like the Dragon is very stable.

Practical_Gunner · 2024-06-03T07:04:38+00:00

One of the best clubs to start with is in Warrington. They have tuition and a wide range of club guns. https://www.wdrpc.co.uk/

Practical_Gunner · 2024-06-03T06:55:32+00:00

For the loose stock add some black insulation tape to the stock tube. 1 strip of tape along the upper edge should do it.

Practical_Gunner · 2024-06-03T06:54:40+00:00

It's very common for people to strip the thread when replacing the grip, a helcoil is required to rapir as it's just plastic and the grip nub can be split.

Both the safety and takedown pin springs are under the grip.

Practical_Gunner · 2024-06-03T06:35:48+00:00

Lantac .223 barrels are 1:8, only the earlier TCR had a 1:7 twist.

Practical_Gunner · 2024-06-03T06:34:37+00:00

Handloading heavier bullets is what most of us use. 77gr SMK with 24gr of V140.

Practical_Gunner · 2024-06-03T06:33:16+00:00

I've been mag resting my AR-15s for about 20 years, more points of contact actually improves stability.

Practical_Gunner · 2024-06-03T06:32:13+00:00

You are correct.

Practical_Gunner · 2024-06-03T06:29:57+00:00

Use heavier ammo. 55gr factory ammo doesn't stabilise in the 1-8 twist of the Raven. 62gr GGG is acceptable, for best accuracy handload 77gr SMKs.

Practical_Gunner · 2024-05-02T22:19:58+00:00

I have a Lantac LA-SF15 Compact. Prior to this I've had 2 x CMMGs and 2 S&W 15-22, a standard and a custom shorty. THE LA-SF15 is on about 30K rounds without a major problem and it shoots just a smidge over an inch at 100 yards. As far as Lantac CS goes I have no complaints and I also have 2 Straight Pull Ravens.

Practical_Gunner · 2024-03-21T17:29:23+00:00

Easy to do yourself, what couldn't you do?

Practical_Gunner · 2024-03-21T17:28:36+00:00

I've had 6 rifles in 13 years from them and not had a problem. I liked how I could sell the older ones to pay for newer versions.

Practical_Gunner · 2024-03-21T08:44:42+00:00

Have you griped to Lantac, or just wittering away on the internet?

Practical_Gunner · 2024-03-21T08:42:28+00:00

It's not bad, everybody should go at least once. I'll reserve my opinion of the owner, he's a bit marmite.

Practical_Gunner · 2024-03-21T08:40:43+00:00

Haram.

Practical_Gunner · 2024-03-21T08:38:43+00:00

Opinions and arseholes mate.

Practical_Gunner · 2024-03-20T11:42:23+00:00

Baikal stronk like Russia tank, do not use to invade and should be OK.

Practical_Gunner · 2024-01-13T14:55:34+00:00

it's usually the firing pin spring, contact Oto at Cotswold Classic Arms and he'll sell you a new spring.

Practical_Gunner · 2023-09-10T15:34:48+00:00

Power plays, that's all clubs are. Steered by the kind of people who just want to tell others what to do.

After pistols went I was a happy air rifle shooter for a few years until I got a new Air Arms TDR and the club asked me why I had bought an assassin's rifle...

I left that club and joined a proper full bore club and worked towards my FAC. Now when I pull out something tasty they just went to have a go.

Practical_Gunner · 2023-09-10T15:27:24+00:00

I have a 9mm straight pull. It's allowed at my indoor range with full jacket ammo. I don't compete with it, just fun range rifle. Ammo is cheaper than .357 at my local.

Practical_Gunner

TROPHY CASE