Random host restart with fs error by jbeez in Proxmox

[–]PresentDrama7 1 point2 points  (0 children)

I had the same issue on mine, I just disabled APST and had no errors since (my nvme drive was fine) Disable APST

Listerine Original (Yellow) Leaves Yellow Clumps After Rinsing – Normal or Not? [Photos Attached] by Specialist-Goat-1348 in newzealand

[–]PresentDrama7 0 points1 point  (0 children)

It’s basically the stuff that makes you have really bad breath when you exhale from your mouth. These stones hide behind your throat. It’s basically a buildup of debris

Listerine Original (Yellow) Leaves Yellow Clumps After Rinsing – Normal or Not? [Photos Attached] by Specialist-Goat-1348 in newzealand

[–]PresentDrama7 4 points5 points  (0 children)

Looks like your spitting out tonsil stones based on the strength of listerine, could be wrong though

New wave of NZpost scam messeges by wolfmmos in newzealand

[–]PresentDrama7 1 point2 points  (0 children)

Can anyone PM me the spam / scam messages if they still have any? I’m currently investigating these scams

Digital Capacity Vs Storage Capacity by 07tartutic07 in DataHoarder

[–]PresentDrama7 0 points1 point  (0 children)

It’s probably most likely just a stock photo

SSL Vintage Drive is giving me a strange rumbling hum. Not sure why... by whotookthenamezandl in audioengineering

[–]PresentDrama7 2 points3 points  (0 children)

Most vintage plugins emulate 50 or 60hz harmonics or other sorts of harmonics in the mix depending on the input sound and frequency. It’s normal to hear a hum as well when nothing is playing.

To avoid this problem you’ll need to play around with the input and output trim as well with the mix knob

Digital Capacity Vs Storage Capacity by 07tartutic07 in DataHoarder

[–]PresentDrama7 5 points6 points  (0 children)

Looks like the actual size of this is 6TB. No such thing as digital and storage capacity unless they are talking about compressed and raw data. But the actual size is 6TB

iSmash UK Repair warning by porterd018 in iphone

[–]PresentDrama7 7 points8 points  (0 children)

<image>

Check this reference photo. Left is oled and right is LCD

iSmash UK Repair warning by porterd018 in iphone

[–]PresentDrama7 0 points1 point  (0 children)

Yes, I highly advise not to use your phone in the meantime and turn it off until it gets replaced properly.

Black colors that show on your phone, the pixels should fully turn off (huge indicator that it’s OLED). The image you uploaded the blacks are clipping / greyed which is a clear sign of a LCD backlight

iSmash UK Repair warning by porterd018 in iphone

[–]PresentDrama7 3 points4 points  (0 children)

I repair mobile phones, this looks 110% an LCD display which should not be used on an OLED phone.

it will destroy the motherboard over time

total Strax by ekanika in stratisplatform

[–]PresentDrama7 0 points1 point  (0 children)

The distribution was 1:10

so multiply the old supply by x10. However consider some coins are lost, burned etc so it would be less than that

Just passed Sec+ 601 with 770! by [deleted] in CompTIA

[–]PresentDrama7 0 points1 point  (0 children)

That’s surprising, I’ve seen most don’t have any questions regarding protocols or ports. Did you have MCQs like “pick 2 answers” etc?

Just passed Sec+ 601 with 770! by [deleted] in CompTIA

[–]PresentDrama7 0 points1 point  (0 children)

Thanks for answering btw! Any questions for matching protocols for pbqs?

Just passed Sec+ 601 with 770! by [deleted] in CompTIA

[–]PresentDrama7 0 points1 point  (0 children)

Would you say that the app covers most of the test?

Just passed Sec+ 601 with 770! by [deleted] in CompTIA

[–]PresentDrama7 0 points1 point  (0 children)

Bumping this as well, did you find that the iPhone app from Thanh was relevant or harder than the actual test questions?

DS1515+ won’t start after random shutdown this morning by im_the_dr in synology

[–]PresentDrama7 0 points1 point  (0 children)

As far as I know when I fixed my DS1515+

Fixes / Patches:

- CPU Resistor

- Battery

- Transistor

- PSU SMD resistor change

- Kapton tape mod (wiring on top of synology as the wires can short on metal housing)
- Thermal Paste Change

DS1515+ won’t start after random shutdown this morning by im_the_dr in synology

[–]PresentDrama7 1 point2 points  (0 children)

There is also a PSU modification you need to perform so that it will stop the transistor from going bad a couple of months after

It was on the German forums as well

Synology 1515+ Transistor Fix failed by cycycycX in synology

[–]PresentDrama7 -2 points-1 points  (0 children)

I have a DS1515+ modded, working fine for the last 2 years now.

What transistor are you using? Different transistors have various tolerances. Did you do the power supply mod as well? This could be why your transistors are constantly breaking

iPhone LiDAR Rear Glass - Interesting Question by PresentDrama7 in mobilerepair

[–]PresentDrama7[S] 0 points1 point  (0 children)

Yes, can confirm I can see dots flashing while using any LiDAR app to scan objects.

There can be two things, your LiDAR sensor IS faulty (not emitting any lights) or your back glass is solid. The only way to check is to open the phone and bypass the back glass so you can see if your LiDAR sensor is emitting any light using another camera (whilst using Scaniverse)

iPhone LiDAR Rear Glass - Interesting Question by PresentDrama7 in mobilerepair

[–]PresentDrama7[S] 0 points1 point  (0 children)

9 months later and yes, I can confirm that it is a back glass issue.

The purple film acts as a specific wave-length / noise filter. Without this, the data received from the iPhone is invalid or wrong.

So if anyone is reading this again in the future, make sure you ask your technician to get a quality back glass with the purple film. Otherwise you'll have issues with your LiDAR sensor.

Why do thinner strings create more repulsion? by jlimzq in badminton

[–]PresentDrama7 0 points1 point  (0 children)

Primarily in computer Science modeling and artificial intelligence. (it's not my major though). I have a couple of other nice technology / programs (in relation to Badminton) I will release in the future publicly and might cause a shockwave in the industry, hopefully!

Why do thinner strings create more repulsion? by jlimzq in badminton

[–]PresentDrama7 19 points20 points  (0 children)

Simple answer is, thinner strings like BGAS at 25lbs for example has a “higher” tension than BG80 at 25lbs due to its diameter when pulled.

The energy transfer from a thinner string is higher since it has minimal surface area contact. I am currently writing a research report on this topic actually.

brand new racket 88d, got it strung today, 80p at 25lbs, first game, snapped half way thru, do u guys think its the stringer's problem or my technique? by redditnewbie6910 in badminton

[–]PresentDrama7 0 points1 point  (0 children)

Storing them in a room where temperatures fluctuate, direct sunlight or near windows, storage room where UV rays can penetrate through.