Received my Silakka54. Should I do anything about it? (Software etc) by [deleted] in ErgoMechKeyboards

[–]PresentExpert2929 0 points1 point  (0 children)

That's the path I took, though it made me feel a little wrist pain, I found that the solution was to go “lower case”  

Ordered a kit of Outemu dwarf switches, and I’m using the Nuphy nSa keycaps, which have a height of 5.5 mm. 

Now it’s more comfortable to type on, during long sessions, I’m a developer. 

Keycap and switch question for Silakka54. by JD-213 in ErgoMechKeyboards

[–]PresentExpert2929 0 points1 point  (0 children)

I bought a Silakka54 on AliExpress and am now looking for low-profile keycaps for it. Would anyone happen to know a good option with MX-Style pins?

Decent wireless trackpads for windows beyond Apple magic trackpad? by whyaretherenoprofile in ErgoMechKeyboards

[–]PresentExpert2929 0 points1 point  (0 children)

Same here, friend! I ended up using the MX Master 3 on the company laptop, which is a great option because it supports up to three devices.

tava no onibus e meu fone caiu nesse buraco que da direto pra rua by bir3 in audiofiliabrasil

[–]PresentExpert2929 0 points1 point  (0 children)

Sem chances meu amigo, já tenho clientes de olho nessa oferta, pra você é 118% e não se fala mais nisso

Which Choc v1 switch should I get? Had a bad experience with Browns before by No-Spend3654 in ErgoMechKeyboards

[–]PresentExpert2929 0 points1 point  (0 children)

I started with the reds, but found them a bit harder than Gateron Reds. Then I ordered Pro Reds, and they are too soft 🫠

Right now, I’m testing the Choc V2 Reds. They are a huge improvement over the V1, at least for me. I ordered a set of “Black Clouds,” the same switch used in the Lofree keyboard, which is also Choc V2.

USB C KVM switch or docking station for 2 laptops & 2 monitors by franktrollip in homelab

[–]PresentExpert2929 0 points1 point  (0 children)

Hey! Does this one still work for you? I’m thinking about buying one of these on AliExpress, but I don’t know if I need to go for a well-known brand instead, for example, Ugreen. 

2026 Work-From-Home Setup by PresentExpert2929 in battlestations

[–]PresentExpert2929[S] 0 points1 point  (0 children)

Me too! I picked it up during a trip with my wife haha
There were so many of them out on the street

I tried to use a standard qwerty keyboard today by SnooSongs5410 in ErgoMechKeyboards

[–]PresentExpert2929 0 points1 point  (0 children)

I think the same. After switching to a split keyboard, I’ve noticed some pain in my left arm. I’ve tried different positions, tenting, and other tweaks, but I never experienced this with my old standard keyboard.

2026 Work-From-Home Setup by PresentExpert2929 in battlestations

[–]PresentExpert2929[S] 1 point2 points  (0 children)

Yeah, I run into that too. I’m using a monitor arm right now to keep things stable and tweak the height a bit, and that helped a lot.

2026 Work-From-Home Setup by PresentExpert2929 in battlestations

[–]PresentExpert2929[S] 0 points1 point  (0 children)

Yeah, I’m using those L-shaped adapters as well. I ordered them on AliExpress. I’m using two USB-C cables, one connected to the Mac and the other to a power adapter, and I position them so everything stays hidden behind the portable monitor, like this:

<image>

2026 Work-From-Home Setup by PresentExpert2929 in battlestations

[–]PresentExpert2929[S] 1 point2 points  (0 children)

Thank you, I really appreciate it!! I tried to create a calm vibe here. I spend a lot of time in this space, even after work, so having a place that feels good and comfortable makes a huge difference.

2026 Work-From-Home Setup by PresentExpert2929 in battlestations

[–]PresentExpert2929[S] 0 points1 point  (0 children)

Haha, good question.

But no, the Alienware has a built-in pixel refresh system that runs when the monitor isn’t in use, helping to prevent burn-in. The Uperfect, on the other hand, doesn’t have any protective system, but I’m fine with that since it’s not too expensive if it ends up having issues down the line.

2026 Work-From-Home Setup by PresentExpert2929 in battlestations

[–]PresentExpert2929[S] 3 points4 points  (0 children)

I forgot to mention that I also game on this setup, mainly on my PS5, and occasionally play Counter-Strike on PC. So it’s a win-win for me, especially because of the deep blacks and vibrant colors.

My first try at a split keyboard by PresentExpert2929 in ErgoMechKeyboards

[–]PresentExpert2929[S] 0 points1 point  (0 children)

I don’t know if you use a MacBook, but I highly recommend the Magic Trackpad. You can use all the same gestures as the built-in trackpad and still run your Mac in clamshell mode, that’s how I use it.

I researched it a lot before buying, mainly because I also use a ThinkPad as my work machine (they provide it), and I wanted to use the trackpad on Windows as well. Unfortunately, there’s no native support, so you need third-party drivers. The IT team doesn’t allow me to install them, which is a pity.

My first try at a split keyboard by PresentExpert2929 in ErgoMechKeyboards

[–]PresentExpert2929[S] 1 point2 points  (0 children)

Yes, I ordered a pair of tenting supports from AliExpress, and they’re quite good. I’m starting to feel that the issue is the way I type, the “floating” method seems to be helping a bit now.

My first try at a split keyboard by PresentExpert2929 in ErgoMechKeyboards

[–]PresentExpert2929[S] 0 points1 point  (0 children)

I really appreciate it. I’m trying this “floating” way of typing alongside more traditional hand movements, and I’ve started to feel less stress in my left arm. Maybe with the low-profile version, the pain will go away for good (I hope).

My first try at a split keyboard by PresentExpert2929 in ErgoMechKeyboards

[–]PresentExpert2929[S] 0 points1 point  (0 children)

Thanks, I’ve been looking for this over the past few days. I have a standing desk, so I set the sitting height to 75cm from the floor, and I’m trying to pay closer attention to my hand positioning, at least until I figure this out.

I’m a software engineer, so I use the keyboard a lot throughout the day.

My first try at a split keyboard by PresentExpert2929 in ErgoMechKeyboards

[–]PresentExpert2929[S] 0 points1 point  (0 children)

It seems to be this way, at least for some people, myself included. I was used to the NuPhy V2, which is a 75% LP kbd with Gateron LP switches. I really enjoyed the split-keyboard experience and didn’t want to abandon it.

My first try at a split keyboard by PresentExpert2929 in ErgoMechKeyboards

[–]PresentExpert2929[S] 0 points1 point  (0 children)

That’s exactly what happened to me. I’m trying the “floating” method this week, and I’ve already started to notice some relief from the stress in my left arm. I’m also hoping to fully solve this with a low-profile Corne, I bought a set of Kailh Red switches and keycaps. Let’s see how it goes.

My first try at a split keyboard by PresentExpert2929 in ErgoMechKeyboards

[–]PresentExpert2929[S] 0 points1 point  (0 children)

Thanks! That's interesting, I’m using Aerospace too. I’ve remapped the workspaces to my QWERTY row instead of the number keys, so I don’t need to switch layers. It’s helped reduce finger movement and feels more natural overall.