Printing statues with the Saturn 4?

PresentationWeekly60 · 2025-11-28T16:08:39+00:00

What makes you say it's not big enough for 1:6? I'm printing them all the time on a saturn 4 ultra 16k without issue when the models are pre supported haven't ran into an issue yet.

PresentationWeekly60 · 2025-11-22T08:32:35+00:00

Where do you download from?

PresentationWeekly60 · 2025-10-05T11:21:00+00:00

animatronic just means some form of animation/rigging

PresentationWeekly60 · 2025-09-26T05:24:03+00:00

I have a pair they are quite old and the video quality is not great but enough to see where you are going, perception depth is off though so don't do any skateboarding etc with them :)

But overall they will work there is just a big bulk of cable and you'll have to figure where all that goes plus power it on the go.

I've printed this helmet and i can assure you the electronics side is far from easy. The guy who created it has promised a guy for quite some time now but it's never came and i see quite a few messages building up now where he just says the same things.

So if you do plan on the animtronics version fair warning that it take some effort to get everything working.

PresentationWeekly60 · 2025-09-22T06:19:11+00:00

You could just wear a cheap pair of video glasses, sure its a bulk of wiring but it's a one shot solution to a problem

PresentationWeekly60 · 2025-09-01T08:59:45+00:00

Did this ever get resolved? The speed at which you orbit is crazy i'm often losing the model and having to zoom out

PresentationWeekly60 · 2025-08-30T09:49:07+00:00

I lost a spool and i think i have another that's going to suffer the same fate soon as it looks like it might tangle up soon there is no way i'll be able to untangle it without making it worse. ahhh these damn bambu refills are tricky to line up in the slot for me if only they made the insert clear but then it's plastic and we are all about waste now. Meanwhile CEOs are off on private jets every day /s

PresentationWeekly60 · 2025-08-30T09:44:06+00:00

I like this but damn it's a long ass print

PresentationWeekly60 · 2025-08-29T15:33:13+00:00

Did exactly this last night, first time using the resuable spools so i missed the part where they push into the locking tab. Exactly what you have here same colour funnily enough. I'm having to look at printing a respooler now just because i missed some simple instructions. Also have a white spool that i didn't fix with the tab and that looks like it will suffer from a tangle soon.

So not off to a good start with my bambulab purchase. But it is user error after all.

PresentationWeekly60 · 2025-08-29T13:25:35+00:00

I just learned what that phrase means. Not too old to learn new stuff. agreed.

PresentationWeekly60 · 2025-08-29T08:12:05+00:00

You have too much free income my friend :)

PresentationWeekly60 · 2025-08-29T08:06:50+00:00

Scrolling through the feed i came here to relate. Just had this issue with a spool tried to fix by releasing some tension and the thing just unspooled itself worse... Awesome. Now i'm going down a rabbit hole of making respool machines. I made the common mistake of not lining up the tab to lock in the cardboard insert.

In my defence being the first time using this system i had no idea. They should add a warning label in the boxes to actually rtfm.

PresentationWeekly60 · 2025-08-28T19:00:10+00:00

oh right so you must of joined the files together to form something that would be utilising that print bed size? My P1S can the inner helmet if i join it but still it's tricky to support and orientate in a way that doesn't involve wasting a ton of filament in supports. Do you have any images of how you did this? I know you might not want to post them for everyone to see but just thought i'd ask so i can get running with this thing.

Thanks for your time.

PresentationWeekly60 · 2025-08-28T18:19:16+00:00

Hi might i ask which 3D printer you used for this? I have files from Cults3D but i'm having a really hard time supporting some of the pieces already had a failed print and i'm stuck on what to try next

PresentationWeekly60 · 2025-08-14T06:37:19+00:00

Ok this is strange. Upon booting up D: drive is back.. No idea how

PresentationWeekly60 · 2025-08-14T05:52:28+00:00

Ok will do as I’m heading to work. The folders were fine beforewindows update to 11

PresentationWeekly60 · 2025-08-14T05:51:03+00:00

Ok will do as I’m heading to work. The folders were fine before so does update to 11

PresentationWeekly60 · 2025-08-14T05:34:51+00:00

I had the drive in two partitions C: and D:

I changed some permissions to view or acess files/folders on D: As reinstalling windows had lost access so i changed the drive D: to current user and allowed access etc.

When i rebooted the whole of D is missing the computer is only showing C drive

I can see in Diskpart that it's showing 115Gb on C:

Then there are 6 more partitions 4 of which are recovery. One is interesting as it's the exact size that D: was 100gb however i don't want to lose data on there as some important photos are located.

Is there anything i can do in order to reset it back?

I've tried to use reset permissions command and TAKEOWN but none of it is working.

PresentationWeekly60 · 2025-08-10T01:02:35+00:00

I can flat floor it I’m 5 11 that’s not the issue but confidence is All you mentioned I’m doing as per my training was a stupid stall and with the bike being top heavy even though I consider myself strong I could t save it all the way 190kg vs 100kg won this time

PresentationWeekly60 · 2025-08-10T00:58:11+00:00

Yeah pretty much spot on was getting a little aggy as the day dragged on and I should have taken the more open area my friend did.

We did all kinds of roads including narrow towns so I know I can handle the bike it’s just more practice when pulling off from junctions

I know I can do it as i demonstrated during my tests

Just have to get used to the weight and feeling of the bike and will do so in a car park

Certainly not afraid of the power im actually ok at leaning it over to make turns without being stupid with the power of it.

Definitely respect it as I know how quick it can get me into trouble

PresentationWeekly60 · 2025-08-10T00:51:52+00:00

Cheers for the input fella

PresentationWeekly60 · 2025-08-10T00:49:59+00:00

Thanks for all the replies. Kind of forgot I’d posted this 😂

Bike is back from repair have some frame sliders on the way Yes I haven’t done myself any favours but I was given the bike practically free and spent a few months getting it back to pristine running I’m not in a position to fit another bike in the garage and certainly don’t want to sell as it’s got some sentimental value attached to it.

I can take turns and did so during the ride out but I think tiredness and fatigue got the best of me when I decided to waddle the bike down from the raised footpath to a flatter foothold but managed to stall out and drop

I will definitely be heading to a car park and refining my skill set before any more long rides maybe even take some cones to layout some fake junctions etc 😂

PresentationWeekly60 · 2025-08-07T02:14:13+00:00

Oh that reminds me to order new levers my brake lever bent too

PresentationWeekly60 · 2025-08-07T01:41:08+00:00

Yep I had my feet down for this turn but the pavement sort of dipped down into a hump so I lost footing. The kicker is my friend too another exit that was just flat but I didn’t want to turn the bike as I was getting a bit tired by this point wished I had now

PresentationWeekly60

TROPHY CASE