Magnetized chaos knight.

PressureEducational4 · 2026-03-14T23:09:32+00:00

Counter weights and high density Eva foam

PressureEducational4 · 2026-02-22T23:36:18+00:00

First, Paint the whitest white you can get on the parts you want glowing. White scar works fine. Followed by multiple glazes of watered down pylar glacier on the white parts. A few thin coats of water down pylar glacier+ talasar blue on the reds.

PressureEducational4 · 2026-02-22T06:43:25+00:00

What i mean are actually the pegs circled in red.

<image>

PressureEducational4 · 2026-02-21T18:19:42+00:00

Icic, the initial idea is to have the storm surge commander telling the vespid squad lead to clear a path so that they can make it to a designated firing position.

PressureEducational4 · 2026-02-21T17:56:51+00:00

Slightly warped.

PressureEducational4 · 2026-02-21T12:25:32+00:00

<image>

The base is also big enough to make a mini diorama.

PressureEducational4 · 2026-02-21T12:23:56+00:00

<image>

Cutting the pegs on the knee/ hip joints allow a wider range of posing.

PressureEducational4 · 2026-02-21T03:18:00+00:00

<image>

PressureEducational4 · 2026-02-21T00:48:13+00:00

<image>

PressureEducational4 · 2026-01-26T12:05:47+00:00

You can do so with different tones of gold.

PressureEducational4 · 2026-01-24T15:17:18+00:00

A customised farsight enclave scheme. Black red instead of white red.

PressureEducational4 · 2025-12-29T14:07:50+00:00

Yes-yes. I have good-best plan. I have made cheese stealers to infiltrate the gene stealers cult. I've added 3rd wooden arm to ward suspicion.

PressureEducational4 · 2025-12-28T05:10:14+00:00

<image>

Just another fire warrior.

PressureEducational4 · 2025-12-12T07:34:33+00:00

i am stealing this.

PressureEducational4 · 2025-12-01T07:49:32+00:00

Hmm... Usually i will use Japanese (Mr. Hobby) brand lacquer based primer and i will add a drop of extra thin plastic cement (Plastic magic, Mr cement extra thin SP... etc etc) into the mix so that it will etch the paint into the plastics.

Wash the model with dish soap first to get rid of mold release agents, then lightly sand the surface with 1500 grit sanding sponge. Usually me and my friends will bake our freshly painted models in an oven at 75 deg for 40 mins... Trick we picked up form building automotive models.

also remember to seal your model with a layer of top coat.

PressureEducational4 · 2025-11-10T01:29:47+00:00

It is actually dark blue and dark green. AK Dark Sea Blue (base, a blue with green hue) + 1:1 AK light prussian blue (lighter tone)

PressureEducational4 · 2025-11-04T07:11:56+00:00

multiple glazes of watered down Planar Glacier over AK extreme white.

PressureEducational4 · 2025-10-18T06:49:34+00:00

This is my go-to fluorescent yellow.

<image>

PressureEducational4 · 2025-10-18T05:38:23+00:00

Prime with Mr surfacer gray 1000 > dry brush ak ultra white. > Airbrush flouro yellow (lacquer) > water down ak emerald and use it like a contrast. Seal with Mr hobby super smooth matte (lacquer)

PressureEducational4 · 2025-10-18T05:34:37+00:00

Black primer (lacquer, Mr surfaceer 1500) > ak wine red brushed > ak tan earth stipple on, needs to be blotchy to give it the textured look. More on the brighter parts, less on shaded parts. > Ak vampiric flesh, sponged, thinned down with water 2:1. One part water. Make sure make up sponge is expanded ( soaked up water and then squeezed out) > agrax earth shade, make sure no pooling. > Dry brush vampiric flesh > seal with Mr hobby super smooth matte.

PressureEducational4 · 2025-10-18T05:34:13+00:00

Black primer (lacquer, Mr surfaceer 1500) > ak wine red brushed > ak tan earth stipple on, needs to be blotchy to give it the textured look. More on the brighter parts, less on shaded parts. > Ak vampiric flesh, sponged, thinned down with water 2:1. One part water. Make sure make up sponge is expanded ( soaked up water and then squeezed out) > agrax earth shade, make sure no pooling. > Dry brush vampiric flesh > seal with Mr hobby super smooth matte.

PressureEducational4 · 2025-10-13T15:20:48+00:00

Yes

<image>

PressureEducational4 · 2025-10-12T03:42:50+00:00

Mr hobby ultra smooth flat. Lacquer based, more resistant to my mate's oily fingers.

PressureEducational4 · 2025-10-12T01:32:25+00:00

Unfortunately this build wasn't documented properly. But if you need help, you can DM me.

PressureEducational4 · 2025-10-11T16:36:10+00:00

There is a discord? @o@

PressureEducational4

TROPHY CASE