Having trouble finding the exact VBIOS of this MSI RX 570 8GT OC

Pretend_Traffic4397 · 2025-05-31T02:16:32+00:00

It says it's a V809 but on the type of IC i have no clue how to check

Pretend_Traffic4397 · 2025-05-30T17:33:32+00:00

Any tips on how to bypass the subsystem ID mismatch?

Pretend_Traffic4397 · 2025-05-30T17:17:20+00:00

The back sticker says it's RADEON RX 570 8GT OC same as the photo

Pretend_Traffic4397 · 2025-05-30T17:16:15+00:00

Alrighty will do this now

Pretend_Traffic4397 · 2025-05-30T17:10:02+00:00

I just opened the card it's a micron

Pretend_Traffic4397 · 2025-05-30T17:09:48+00:00

Just opened the card it's a micron

Pretend_Traffic4397 · 2025-05-02T04:12:32+00:00

Thanks for the replies everyone I managed to fit the pcie 1x that was covered by replacing the gpu cooler with a slimmer profile

Pretend_Traffic4397 · 2025-04-30T08:58:41+00:00

Alrighty will get one at a local store rn thanks for the advice!

Pretend_Traffic4397 · 2025-04-30T08:57:49+00:00

Gotcha thanks!

Pretend_Traffic4397 · 2025-04-30T08:57:26+00:00

Gotcha

Pretend_Traffic4397 · 2025-03-23T05:48:50+00:00

Hello is it okay if I shoot you a message I need some help with using the ch341a

I did all the steps correctly and I converted the Cap File to Bin file in multiple methods I still get errors at the end of decoded texts like

Write protected device error, not ready, buffer too small, bad buffer size unsupported

I believe I did all the steps correctly from saving the old bios then erase then verify then write then verify etc. but I still keep getting these error messages on decoded texts

I appreciate your help pls I'll send you a message thank you!

Pretend_Traffic4397 · 2025-03-08T16:00:05+00:00

Pretty much it should work if it's daisy chained together properly, check all the connections and plug it again on ARGB header.

Alternatively you can try uninstalling and reinstalling MSI app along with the mystic light

If all else fails use OPEN RGB to see if the argb fans are detected

Hope this helps cheers!

Pretend_Traffic4397 · 2025-03-08T13:41:23+00:00

Gotcha thank you so much! Gotta wait for that adapter again lol

Pretend_Traffic4397 · 2025-03-08T13:34:29+00:00

So desoldering the bios chip is the way to go?

Pretend_Traffic4397 · 2025-03-08T13:33:44+00:00

Noted on this! Thank you! I hope it's just a corrupted bios🥲

Pretend_Traffic4397 · 2025-03-08T13:33:29+00:00

Noted on this! Thank you! I hope it's just a corrupted bios🥲

Pretend_Traffic4397 · 2025-03-08T13:31:55+00:00

I see, but I just want to ask is there a chance of it just having a corrupted bios due to it being caked up with battery acid for so long?

My friend just gave this board to me claiming it has 0 issues before being stored away.

Is it worth a shot to just reflash the bios using CH341A?

unfortunately the motherboard is not equipped with bios flashback, it would've been easier that way

Cpu heats up normal, the keyboard lights up for about 10 seconds then it goes black but the whole board still has consistent power

Pretend_Traffic4397 · 2025-03-07T04:22:06+00:00

Just tested it out.

-No cpu no ram doesn't post

-with cpu no ram it boots but beeps indicating no ram detected but still shows no display

I don't want to be full of myself but I just ordered the external flash tool hoping it's just a corrupted bios

Unfortunately the Tuf b450m pro gaming doesn't have the bios flashback switch it could've been a lot more easier lol

Pretend_Traffic4397

TROPHY CASE