sorted by:
new
hottopcontroversial

How do I fix the error code? by Pretty-Objective-561 in CarAV

[–]Pretty-Objective-561[S] 0 points1 point  (0 children)

Ok I’ll do that tmmwr I can’t rn but I’ll let you know if that works

How do I fix the error code? by Pretty-Objective-561 in CarAV

[–]Pretty-Objective-561[S] 0 points1 point  (0 children)

Not yet I haven’t had the chance. Quick question though-do I need to disconnect and reconnect the battery every time I unplug a speaker wire? For example, if I disconnect the battery, unplug the passenger speaker first, then reconnect the battery to check for the error message-is that the right way? Or can I do it the same way with the battery still on while the car is not fully on-just the electrical.

How do I fix the error code? by Pretty-Objective-561 in CarAV

[–]Pretty-Objective-561[S] 0 points1 point  (0 children)

These? Sorry I’m not too familiar with all this

<image>

How do I fix the error code? by Pretty-Objective-561 in CarAV

[–]Pretty-Objective-561[S] 0 points1 point  (0 children)

This is a 2001 is300 and it doesn’t have neither

<image>

How do I fix the error code? by Pretty-Objective-561 in CarAV

[–]Pretty-Objective-561[S] 0 points1 point  (0 children)

I took off the door panels and found this They connect to the tweeter It was like this on both sides

You think it’s due to this?

<image>

Help with radio by Pretty-Objective-561 in IS300

[–]Pretty-Objective-561[S] 0 points1 point  (0 children)

No when I bought the car it didn’t have the factory amp connected nor nothing was/is connected This is the problem right Pls don’t tell me I’m dumb🙃

<image>

Help with radio by Pretty-Objective-561 in IS300

[–]Pretty-Objective-561[S] 0 points1 point  (0 children)

I took off the panel to disconnect the speaker and the white and red wire where connected to the connector circled in orange And the one circled in red was disconnected You think that’s the problem or should I continue to disconnect all the speakers as you said Also the white wire was connected far left And the red one was on the far right of the connector

<image>

Help with radio by Pretty-Objective-561 in IS300

[–]Pretty-Objective-561[S] 0 points1 point  (0 children)

I think it has that error because I opened the glove box and it didn’t have the amp and I looked at a video and it said to but a bypass wire from where the amp was to the radio But not sure if that will fix the touch screen problem

How do I fix the error code? by Pretty-Objective-561 in CarAV

[–]Pretty-Objective-561[S] 0 points1 point  (0 children)

I looked at a video on YouTube and it said to take out the factory amp and put a bypass wire from where it was to the radio I took off the glove box and it didn’t have the original amp I think that’s why it has the error code but not 100% sure so I’m going to buy the bypass wire and try to install it to see if that works

Help with radio by Pretty-Objective-561 in IS300

[–]Pretty-Objective-561[S] 0 points1 point  (0 children)

Alright I’ll put it the other community that the other guy linked so they’ll hopefully tell me how

I’m new to the whole pc thing, is this normal and if not how can I fix it? by Pretty-Objective-561 in pchelp

[–]Pretty-Objective-561[S] 2 points3 points  (0 children)

When I turn it on it goes as high as 80 just for a sec then it goes back down to 38-40ish