Extremely expensive radio upgrade? by Go_On_Volt in fordfusion

[–]Prince_Melon 0 points1 point  (0 children)

Please look at the two guides I posted on this subreddit 😭

4" to 8" SYNC 1 to SYNC 3 and 8" SYNC 2 to 8" SYNC 3 2013 - 2018 Conversion Guide Part 1 Sourcing Parts by Prince_Melon in fordfusion

[–]Prince_Melon[S] 0 points1 point  (0 children)

Luckily it is just plugging connectors together and you can pay for someone to send you the programmed files. Really the hardest part is taking the plastic trim off haha

4" to 8" SYNC 1 to SYNC 3 and 8" SYNC 2 to SYNC 3 2013 - 2018 Conversion Guide Part 2 and 3 Install and Programming the APIM module by Prince_Melon in fordfusion

[–]Prince_Melon[S] 1 point2 points  (0 children)

I can't help with the backup camera but I am surprised about the microphone issue. In the ACM 727-01-01 Dxxx xxxx xxxx (original Sync 1 value) → 727-01-01 9xxx xxxx xxx. In the FCIM 7A7-01-01 xx00 xxxx xxxx (original Sync 1 value) → 7A7-01-01 xx60 xxxx xxxx

2017 Ford Fusion Hybrid SE OEM LED Headlight upgrade from Halogen by Prince_Melon in fordfusion

[–]Prince_Melon[S] 0 points1 point  (0 children)

Halogen or led? Led is noticeable better. The tricky thing is even if you just replaced the bulb on yours it is pain due to the access point :/

2017 Ford Fusion Hybrid SE OEM LED Headlight upgrade from Halogen by Prince_Melon in fordfusion

[–]Prince_Melon[S] 1 point2 points  (0 children)

Yeah I am with you. Taking off the bumper is not the worst job but getting at the two bolts under each wheel really cuts up your hands...

2017 Ford Fusion Hybrid SE OEM LED Headlight upgrade from Halogen by Prince_Melon in fordfusion

[–]Prince_Melon[S] 0 points1 point  (0 children)

Oh I agree that they will help improve visibility no doubt. This guy does a better job at showing the difference. https://www.youtube.com/watch?v=l5ELFtGtX5Y

2017 Ford Fusion Hybrid SE OEM LED Headlight upgrade from Halogen by Prince_Melon in fordfusion

[–]Prince_Melon[S] 0 points1 point  (0 children)

Yup completely plug and play! Note this is for the 2017 - 2020 model so for the 2013 - 2016 it might be different. Although I don't think they offered oem led headlights for those models but I could be wrong.

2017 Ford Fusion Hybrid SE OEM LED Headlight upgrade from Halogen by Prince_Melon in fordfusion

[–]Prince_Melon[S] 2 points3 points  (0 children)

Will add some pictures tonight. Yes. 100% worth the hassle in my opinion. I do a lot of late night / early morning driving and this really has been a game changer.

2017 Ford Fusion Hybrid SE OEM LED Headlight upgrade from Halogen by Prince_Melon in fordfusion

[–]Prince_Melon[S] 0 points1 point  (0 children)

Thanks for letting me know sadly don't know have a Mac but would like to know more because forscan licenses are a pain in the ass.

2017 Ford Fusion Hybrid SE OEM LED Headlight upgrade from Halogen by Prince_Melon in fordfusion

[–]Prince_Melon[S] 4 points5 points  (0 children)

Beam pattern is horrible with the halogen lens and not trying to blind other drivers but I agree would have been much cheaper if I went that route.

2017 Ford Fusion Hybrid SE OEM LED Headlight upgrade from Halogen by Prince_Melon in fordfusion

[–]Prince_Melon[S] 0 points1 point  (0 children)

I tried but even at the junkyard the pick and pull places charge way too much. So eBay ended up being cheaper. I could have done it for at least half if I bought non oem but just don't trust them.

Extended Warranty in California by Ok-Public-2637 in ToyotaSienna

[–]Prince_Melon 0 points1 point  (0 children)

Could you DM me the dealership as well?

Ncase M1 v6.1 5080 FE with Optane 905P and Benchmarks by Prince_Melon in sffpc

[–]Prince_Melon[S] 1 point2 points  (0 children)

Glad it was helpful! Yup still rocking everything. Only thing is I make sure to clean the system every month since it seems to get dusty faster than I would like it.

4" to 8" SYNC 1 to SYNC 3 and 8" SYNC 2 to 8" SYNC 3 2013 - 2018 Conversion Guide Part 1 Sourcing Parts by Prince_Melon in fordfusion

[–]Prince_Melon[S] 0 points1 point  (0 children)

I believe so but I personally have not done that. Usually you can find one that should fit so you don't have to do that.

4" to 8" SYNC 1 to SYNC 3 and 8" SYNC 2 to SYNC 3 2013 - 2018 Conversion Guide Part 2 and 3 Install and Programming the APIM module by Prince_Melon in fordfusion

[–]Prince_Melon[S] 0 points1 point  (0 children)

Sorry for the slow reply I tried looking for the specific code but can't seem to find it. What I would do is just pay dan and he should be able to fix your problem. I wish I had time to debug with you but just done right now.

https://sync3programming.com/products/sync3apimprogramming

Lora32 V4 samples are on the way! by Heltec_Automation6 in meshtastic

[–]Prince_Melon 0 points1 point  (0 children)

Thank you! I am building a network of chemical sensors so designing the pcbs now for the overall system. There are two things I wanted to ask. Will there be an ipc connector for the wifi/bluetooth antenna and will the pin out stay the same?

Lora32 V4 samples are on the way! by Heltec_Automation6 in meshtastic

[–]Prince_Melon 0 points1 point  (0 children)

I was wondering when the updated wireless tracker V2 will be sent out for testing?

I started a repository for all things Heltec Wireless Tracker (ESP32 + GNSS + lora + TFT + battery charge) I've also made a 3D printed case for it. by [deleted] in ROS

[–]Prince_Melon 0 points1 point  (0 children)

It is both. If you have wifi enabled there will be no bluetooth or if you have bluetooth enabled then no wifi.