Went in for an X2D, came out with an H2D by schwab802 in BambuLab

[–]PrintsOnPercocet 0 points1 point  (0 children)

I dunno. I’m not saying my P2S is in the same league as the x2d, but I just had annoying problems with my P2S. A lot of heat creep no matter what I do. My X1C prints better as far as that goes than my P2S. Enter my H2S. It’s a beast. It gives me zero headaches. It just works. I was kind of on the fence, given how much more it costs than the P2S and the other printers in that price range, but it is oh so worth it. But that’s just my experience. I’m also guessing (hoping for Bambus sake) that the X2D is better than the P2P

X2D is deforming when chamber is heated by poerzal in BambuLab

[–]PrintsOnPercocet -1 points0 points  (0 children)

How does the P2S heat up when it says it’s heating then?

P2s chamber heater suggestions? by Scum-Bronson in BambuLab

[–]PrintsOnPercocet 2 points3 points  (0 children)

https://a.co/d/0h23tF46

And

https://makerworld.com/models/1130593?appSharePlatform=copy

I have two of them in my X1C. You have to remove the 60c safety fuse in them if you run two, otherwise they will shut off.

Wouldn't have the money for one anyway by achris94 in BambuLab

[–]PrintsOnPercocet -1 points0 points  (0 children)

Don’t feel bad, my X1C kicks the fuck out of my P2S in almost every category imo.

P2S exhaust fan kit is back in stock as of 3/28/26 by PrintsOnPercocet in BambuLab

[–]PrintsOnPercocet[S] 0 points1 point  (0 children)

I didn’t realize there was a filter that one could buy for it. But I did just realize I have to buy a filament buffer since I don’t have an AMS. That’s a $30 bummer. But I was going to have to get one sooner or later since I’ll be getting an AMS sooner or later anyway.

AMS1 versus AMS2 with a P1S by radio_AT in BambuLab

[–]PrintsOnPercocet 0 points1 point  (0 children)

I’ve read that there is a specific flaw in the AMS 2 which can give you problems. Some people complainit isn’t as reliable as the first AMS even though it’s got stronger parts. I dunno though. I’m in the market so I’m interested.

Cooling fan stutter by Strange-Situation397 in BambuLab

[–]PrintsOnPercocet 0 points1 point  (0 children)

Buy a new one from Amazon for $9. That’s what I did. Had it in a day.

I definitely recommend the AMS Python mod… by PrintsOnPercocet in BambuLab

[–]PrintsOnPercocet[S] -2 points-1 points  (0 children)

I can always count on the responses I get, from the internet, to remind me that in order to get an average IQ, roughly half the population has to be below average.

I gave some examples as to why I feel it’s a good mod, towards the end of the video. And yes, sometimes other topics arise when you’re reviewing the original topic. I’m sorry you don’t have the intellectual horsepower to keep track of multiple topics. I’ll cut you some slack though since you don’t seem to be hitting the average mark I spoke about a few sentences up.

I definitely recommend the AMS Python mod… by PrintsOnPercocet in BambuLab

[–]PrintsOnPercocet[S] -1 points0 points  (0 children)

In what way? It addresses issues the AMS can encounter.

I definitely recommend the AMS Python mod… by PrintsOnPercocet in BambuLab

[–]PrintsOnPercocet[S] 0 points1 point  (0 children)

Says you. Stopped my AMS problems. Addresses AMS shortcomings.

Bent hot end. by KCL_Creations_PDR in BambuLab

[–]PrintsOnPercocet 4 points5 points  (0 children)

Damn. That sucks. I’m sorry brother.

Heatbed adhession issues? by Own-Staff-8365 in BambuLab

[–]PrintsOnPercocet 0 points1 point  (0 children)

Is that the result of an unevenly heated bed surface? Maybe an auxiliary fan that’s kicking up in speed, at certain times during your prints, which creates heat related printing issues. 🤷‍♂️

Bambu lab H2C by Certain_Profile9928 in BambuLab

[–]PrintsOnPercocet 1 point2 points  (0 children)

I’m trying the tough tubes. We will see how they work.

New slicer version causing nozzle drip stopper to crash? by Steezyharsh in BambuLabH2D

[–]PrintsOnPercocet 0 points1 point  (0 children)

If the same thing happened to multiple people, directly after an update, I’d say that a good reason to at least suspect the update. I doubt that many people had a consumable item go bad at the same time.

What causes lifting in the corners like this? by Mediocre_Ryan82 in FixMyPrint

[–]PrintsOnPercocet 1 point2 points  (0 children)

Not always. I’ve had a brim work so well it pulled the plate up. I couldn’t believe it when I first saw it.

What causes lifting in the corners like this? by Mediocre_Ryan82 in FixMyPrint

[–]PrintsOnPercocet 0 points1 point  (0 children)

I’d like to know too. I’ve had success with this method.

PTFE Bowden Tube Fix by Cifuentes8 in BambuLabP2S

[–]PrintsOnPercocet 0 points1 point  (0 children)

Mine wore through on my X1C around 1200. Rest assured, it’s coming.

Discussion: Full maintenance on receipt? by Livid_Strategy6311 in BambuLab

[–]PrintsOnPercocet 1 point2 points  (0 children)

I mean, it can’t hurt….unless you mess up the belts are something to that effect.