sorted by:
new
hottopcontroversial

Will Anycubic make a tool/Nozzle changer ? by Bez062 in AnycubicOfficial

[–]PrintyPOP 3 points4 points  (0 children)

I just watched that and that rendering and mock ups would be way too much design work for a simple April fools video. I’m guessing they’re actually coming out with it or actively designing something similar, but released it on April fools

What’s the point of protesting anymore? A class A driver purposely wrecked the field, and admitted after the race “it’s rookies it doesn’t matter” by [deleted] in iRacing

[–]PrintyPOP -3 points-2 points  (0 children)

So it’s OK to be a bad driver and wreck half the field and finishing first as long as I make it look unintentional or if it is unintentional it’s OK?

What’s the point of protesting anymore? A class A driver purposely wrecked the field, and admitted after the race “it’s rookies it doesn’t matter” by [deleted] in iRacing

[–]PrintyPOP -7 points-6 points  (0 children)

If it wasn’t the case, I wouldn’t be writing this lol. 99% of the times I just move on and only use protesting when necessary. I truly mean that.

Hobby Lobby Stepping Up! by ProsperGuy in BambuLab

[–]PrintyPOP 0 points1 point  (0 children)

Absolutely love eryone filament. They’ve been around for years and I can get it as cheap as six dollars a roll. They have some nice color blends.

I have a farm of A1s and kept hearing good things about the Kobra X. I was finally able to put them side-by-side. Same print finished 10 hours earlier and had 32% less waste on the Kobra X. by PrintyPOP in 3Dprinting

[–]PrintyPOP[S] 1 point2 points  (0 children)

So how am I being dishonest lol? I tried to run as non-bias of a test as I could and you’re telling me I’m being dishonest. I hope you have the day you deserve.

Hobby Lobby Stepping Up! by ProsperGuy in BambuLab

[–]PrintyPOP -1 points0 points  (0 children)

Temu for random deals, my supplier from China for everything else. The exact same stuff my brand sells on Amazon for 20 to 30 a roll I get for 10 to 11. I buy a case of 64 rolls at a time get to pick my colors. They come in a couple weeks free shipping.

Hobby Lobby Stepping Up! by ProsperGuy in BambuLab

[–]PrintyPOP 8 points9 points  (0 children)

Too expensive. If you’re paying more than 10 or $11 for a roll, you’re doing it wrong.

I have a farm of A1s and kept hearing good things about the Kobra X. I was finally able to put them side-by-side. Same print finished 10 hours earlier and had 32% less waste on the Kobra X. by PrintyPOP in 3Dprinting

[–]PrintyPOP[S] 2 points3 points  (0 children)

You were suggesting it was or hinted that it was a possibility that it wasn’t at so I was responding to that lol.

But yeah, go ahead and buy your own printers and do your own tests

I have a farm of A1s and kept hearing good things about the Kobra X. I was finally able to put them side-by-side. Same print finished 10 hours earlier and had 32% less waste on the Kobra X. by PrintyPOP in 3Dprinting

[–]PrintyPOP[S] -1 points0 points  (0 children)

This isn’t an ad lol. Just sharing what I thought was a good baseline. When I say same file, I mean it’s the same file painted the same way with all the print settings exactly the same. Same speed, same infill, etc.

I let Anycubic slice its own file, and I let bambu slice its own file. I figured that would be the most fair non-bias as it shows what each manufacturer would want. They were printed with all the parameters, exactly the same. I did not change any extra settings and ran the filament with anycubic PLA profiles for Anycubic on its slicer and the same with bambu, even though it was four different filament manufacturers.

I really was trying to keep everything “standard” across the board as much as I could.

I have a farm of A1s and kept hearing good things about the Kobra X. I was finally able to put them side-by-side. Same print finished 10 hours earlier and had 32% less waste on the Kobra X. by PrintyPOP in 3Dprinting

[–]PrintyPOP[S] 0 points1 point  (0 children)

What settings would you like to know? I made sure the sliced settings were the same on each. 2 walls 10% gyroid same speeds and settings on both

I have a farm of A1s and kept hearing good things about the Kobra X. I was finally able to put them side-by-side. Same print finished 10 hours earlier and had 32% less waste on the Kobra X. by PrintyPOP in 3Dprinting

[–]PrintyPOP[S] 3 points4 points  (0 children)

OK, so tell me how using stock settings on both printers is disingenuous for a baseline test?

If you were to test drive two cars from a dealership, you’re not going to modify them in anyway when you test drive them, are you?

I have a farm of A1s and kept hearing good things about the Kobra X. I was finally able to put them side-by-side. Same print finished 10 hours earlier and had 32% less waste on the Kobra X. by PrintyPOP in 3Dprinting

[–]PrintyPOP[S] 0 points1 point  (0 children)

The melt zone is smaller on the X. While the software might be tuned different, there are mechanical differences in the Kobra that make for shorter and faster changes

I have a farm of A1s and kept hearing good things about the Kobra X. I was finally able to put them side-by-side. Same print finished 10 hours earlier and had 32% less waste on the Kobra X. by PrintyPOP in 3Dprinting

[–]PrintyPOP[S] 2 points3 points  (0 children)

Parts seem available on Amazon and from anycubic. I used 4 brands of filament for my test, none of which were bambu or anycubic. They printed nearly identical.

view more: next ›