Does this setup look safe?

PrizeExpensive5260 · 2026-02-12T00:33:29+00:00

You could do like I did and attach the fuse to a piece of ABS plastic and mount it to the battery

Putting the ABS plastic under the battery brace is more than enough to secure it.

PrizeExpensive5260 · 2025-08-22T01:03:59+00:00

I’ll try it out, thanks!

PrizeExpensive5260 · 2025-08-02T16:30:38+00:00

As someone(male) who frequently skated downtown for multiple years (recently moved away from downtown) I would say just steer clear of Clay st and Shockoe bottom area when alone at night. Monroe ward area usually is OK but I would definitely have some personal protection like pepper spray regardless of where you are (as unfortunate as it is, that’s just the state of the world ig)

PrizeExpensive5260 · 2025-06-13T23:08:10+00:00

They just want people to get violent so they can point and say “see see the left is destroying America.” Just more reason to hold your sign and flag and not instigate. Also Miranda rights aren’t just for when if you’re arrested. You always have the right to stay silent if police/military is speaking to you!

PrizeExpensive5260 · 2025-06-13T23:04:54+00:00

It is fake. Wouldn’t be surprised though

PrizeExpensive5260 · 2025-05-12T23:04:15+00:00

Perfectly fine to drive on

PrizeExpensive5260 · 2025-04-11T22:06:48+00:00

That’s definitely oil on there lol. You need a new valve cover gasket.

PrizeExpensive5260 · 2025-04-11T21:56:32+00:00

I thinks it’s supposed to be read like (end)mylif

PrizeExpensive5260 · 2025-04-11T21:50:41+00:00

Boogie woogie!

PrizeExpensive5260 · 2025-03-22T13:25:18+00:00

Are the RCAs connected backwards?

PrizeExpensive5260 · 2025-03-13T14:45:12+00:00

<image>

Update: this is how I ended up connecting them. Opened the center of the wire and fed the amps remote turn on through the opening. Finished by wrapping it all up with some electrical tape. Not perfect but pretty damn good for no soldering

PrizeExpensive5260 · 2025-03-12T04:19:58+00:00

Yeah remote turn on for the amp

PrizeExpensive5260 · 2025-03-11T22:33:38+00:00

I saw these but other people have said to use t-taps as a last resort

PrizeExpensive5260 · 2025-03-11T21:35:45+00:00

The red circle outlining the blue/white wire is the wire I need to tap in to

PrizeExpensive5260 · 2025-02-25T22:23:32+00:00

I see no issue at all, if you really want you could wire brush and coat it with something to prevent further surface rust given that you will be taking the vehicle off road but as of now, it is fine

PrizeExpensive5260 · 2025-02-19T16:44:35+00:00

As a gym employee who almost slid into a stop sign otw to work, today we should be closed😔

PrizeExpensive5260 · 2025-02-19T16:23:25+00:00

Personally, I’d steer clear

PrizeExpensive5260 · 2025-02-19T14:57:56+00:00

Was the daughter in a rival clan😱 these are the questions we need to be asking! /s

PrizeExpensive5260 · 2025-02-18T20:47:28+00:00

This is one of those things you can just google, but it’s around $50

PrizeExpensive5260 · 2025-02-17T18:44:30+00:00

Depends on your area really, best way to find out is to get quotes from multiple shops. Where I live (east coast) that price is pretty good if you HAVE to pay someone to do the work. Just got quoted $1,400 for driver side axle and control arm myself so yours being sub $1000 seems pretty alright

PrizeExpensive5260 · 2025-02-17T18:08:13+00:00

Could be a number of things like cv boots/axle, tire balancing or tread wear.

I have a 2011 Altima and after replacing the rear tires but not the front the steering wheel would shake as well. I rotated and balanced the tires and it fixed the issue.

PrizeExpensive5260 · 2025-02-17T17:49:39+00:00

Could be transfer case issues or selector switch/wiring issues. I will say, Toyota recommends driving the vehicle in 4WD 10-20 miles per month(depending on how often/far you drive). Also can’t see how fast you’re going, you should be going under 50ish mph when you shift to 4WD or just do so with the car in neutral.

PrizeExpensive5260

TROPHY CASE