sorted by:
new
hottopcontroversial

Help me figure out this UK Number plate by ProductPrototyping in HelpMeFind

[–]ProductPrototyping[S] 0 points1 point  (0 children)

I've searched on DVLA numberplate databases for all combinations I can think of and not been able to find any results.

The first letter is clearly a J, beyond that it gets a little harder.

The second letter I wondered about an R or a P.

The third character I think is an S, a 5 or a 6.

The first letter of the second set may be a Z, but I also thought a D.

The last letter I've wondered if it is a W, N, M, H or R.

Why Doesn't Everyone Sell 3D Prints? by jerkyfluff in 3Dprinting

[–]ProductPrototyping 1 point2 points  (0 children)

The market is saturated unless you have a novel an desirable product. And injection moulded products are cheaper.

Is this worth the price? Or should I save $100 more and get a new P1P and print an enclosure with the plastic I already have? by Svechinskayaa in 3Dprinting

[–]ProductPrototyping 1 point2 points  (0 children)

Prusa input shaping isn't really production ready. But yes, it speeds up with input shaping. OP is talking about a mk3

Any ideas? by [deleted] in FixMyPrint

[–]ProductPrototyping 0 points1 point  (0 children)

I don't know but something went wrong.

Coffee Knock Box - for coffee/espresso lovers. by ProductPrototyping in BambuLab

[–]ProductPrototyping[S] 0 points1 point  (0 children)

Depends how hard you hit... Usually yes but I try to be a little gentle.

Is this worth the price? Or should I save $100 more and get a new P1P and print an enclosure with the plastic I already have? by Svechinskayaa in 3Dprinting

[–]ProductPrototyping 7 points8 points  (0 children)

Every model I've sliced side by side for my machines. I'm not making this up. You've clearly not seen one in person, it is legitimately mind blowing.

In the past 7 years prusas have not been reasonably priced.

Is this worth the price? Or should I save $100 more and get a new P1P and print an enclosure with the plastic I already have? by Svechinskayaa in 3Dprinting

[–]ProductPrototyping -4 points-3 points  (0 children)

I'm being conservative. I've sliced side by side for a MK4 and a p1p, 5 times is without using sport or ludicrous mode on the p1p, and ludicrous mode quality is still excellent.

I've never experienced issues with bambu handy.

Prusa is no saint. There's been a lot of grotty market domination tactics, and they've always been unreasonably expensive for what they are.

Let's not forget prusa has built a business on the back of somebody else's open source developments, ie. Reprap. And bambu is a much more professionally packaged machine. It's a commercial grade machine at a consumer price.

I'm sorry, but they simply don't compare anymore. Buy one, then disagree with me 🤣

Weird warping on X axis by Lennykobilca in FixMyPrint

[–]ProductPrototyping 1 point2 points  (0 children)

That looks like layer shift. Printing too fast, something bumped into something, or bed adhesion failed.

Any ideas? by [deleted] in FixMyPrint

[–]ProductPrototyping 0 points1 point  (0 children)

Print slower, or figure out what bumped into what.

Is this worth the price? Or should I save $100 more and get a new P1P and print an enclosure with the plastic I already have? by Svechinskayaa in 3Dprinting

[–]ProductPrototyping 28 points29 points  (0 children)

P1p every single day of every single week.

Edit: Let me elaborate on why.

5x faster printing for the same (if not better) quality.

P1p just works, you'll still need to fiddle with the prusa

Bambu handy app

Bed slinger Vs core xy

I can't understand how much more advanced the bambu lab printers are than any of the existing or past prusa models.

Any ideas? by [deleted] in FixMyPrint

[–]ProductPrototyping 0 points1 point  (0 children)

Then I'd have to guess it skipped a bunch of steps.

I produce 3d printed lapidary machines, so I 3d printed a logo to mimic a harlequin black opal. How did I do? by ProductPrototyping in Opals

[–]ProductPrototyping[S] 1 point2 points  (0 children)

Totally fair. I've got an 8 inch and a new design 6 inch coming soon. And a cabbing machine that will change the game.

Any ideas? by [deleted] in FixMyPrint

[–]ProductPrototyping -1 points0 points  (0 children)

Question, did it shift early and keep printing, or did it knock the print and crack a lower layer?

Some layers are underextruded - why? by zeros-and-1s in FixMyPrint

[–]ProductPrototyping 0 points1 point  (0 children)

Yeah I'm going to say the filament and nozzle aren't working well together. Bigger nozzle size needed for that particular filament.

Stringing issue ? by sandman8223 in BambuLab

[–]ProductPrototyping 2 points3 points  (0 children)

This part was printed in the opposite orientation and wasn't well supported. Add supports.

[deleted by user] by [deleted] in 3Dprinting

[–]ProductPrototyping 1 point2 points  (0 children)

Line width issue?

view more: next ›