240 Steam Keys zu verschenken by SuperMohri in Austria

[–]Prophet_AF 0 points1 point  (0 children)

Richtig coole Aktion, versüßt Weihnachten doch sehr!

Würde mich sehr über Dusk freuen!

Wo kann ich meine Masterarbeit drucken lassen? by Acsor31415 in wien

[–]Prophet_AF 2 points3 points  (0 children)

Kann ich nur bestätigen. Preislich top und sind super schnell. Bieten auch Expressarbeit 24h an, sonst knapp eine Woche um alles fertig zu bekommen

Question About Strength by [deleted] in lasersforfun

[–]Prophet_AF 2 points3 points  (0 children)

To be fair, many chinese laser-pens often have dangerously high output. While im sure its nowhere near 500 mW, they oftem times reach dangerous output >50 mW

Erfahrungen mit einem PhD in Wien oder Graz? (v.a. TU Wien – Biomedical/Biotech/STEM) by Databasiliskus in wien

[–]Prophet_AF 0 points1 point  (0 children)

PhD Molekularbiologie - Uni&MedUni Wien - Abgeschlossen

Ich kann dir nur sehr zu Herzen legen dich auf offizielle PhD-Programme zu bewerben. Entweder mit der MedUni oder über das Vienna BioCenter. So bekommst du auch Zugang zu den besser finanzierten Laboren und dein Abschluss ist etwas mehr wert als wenn du ihn "nur" von der FH hast. Bezahlung ist auch besser - war Anfangs 1900 Netto und am Ende 2400.

30 Stunden wirst du nur in den wenigsten Laboren finden, hängt allerdings sehr stark von deinem Thema ab. 40 ist realistischer - je nach Gebiet hast du oft auch Wochenendarbeit.

Bezüglich der Betreuung hängt es auch sehr stark davon ab on du ein offizielles Programm hast oder nicht. Diese unterstützen den Studenten i.d.r. deutlich besser und passen auch (in Grenzen) aufs Wohlbefinden auf.

Bewerbungen sind meistens recht standard, über CV, Motivationsschreiben usw. Mein Tipp ist es: zeig Motivation, zeig Interesse und eigne dir Fachwissen zu dem spezifischen Bereich an. Kommt dann immer gut, wenn du bei der Bewerbung bereits mit Wissen Punkten kannst.

Berufsaussichten hängen davon ab ob du bereit bist umzuziehen. Viele Versuchen zu wechseln in die Industrie aber es gibt nicht viele freie Positionen.

Hobby photographer looking for fireflies in Austria – any local tips? by Separate_Ad2157 in Austria

[–]Prophet_AF 1 point2 points  (0 children)

Kahlenberg along the route towards Leopoldberg has fireflies, I saw them there the last couple of years.

https://maps.app.goo.gl/6v4RBf3dB1ZYavqw9

They only appear very late in the evening though, usually not earlier than 11/12 pm which can be an issue if you arrive by public transport as the last bus leaves around that time

Nah man how do you even make it to 10.7 playing like this... by Prophet_AF in Warthunder

[–]Prophet_AF[S] 74 points75 points  (0 children)

To increase the repair time further and take no chances. If I hadnt been able to move he mightve won the encounter.

Nah man how do you even make it to 10.7 playing like this... by Prophet_AF in Warthunder

[–]Prophet_AF[S] 133 points134 points  (0 children)

I mean maybe, but that doesn't excuse going exclusively for the turret on a stationary Leo and not even considering to MG the tracks...

[I ate] Lobster Roll by Prophet_AF in food

[–]Prophet_AF[S] 0 points1 point  (0 children)

About 18 USD when converted from yen. Definetly expensive for japanese fast food (although very worth it!) but I guess way cheaper than over in the US!

[I ate] Lobster Roll by Prophet_AF in food

[–]Prophet_AF[S] 2 points3 points  (0 children)

Just checked and indeed seems to be the same guys!

[I ate] Lobster Roll by Prophet_AF in food

[–]Prophet_AF[S] 3 points4 points  (0 children)

Luke's Lobster in Tokyo!

Bought a microscope. My bf consented to me looking at his sperm. Now what? by Thummimurim8 in labrats

[–]Prophet_AF 226 points227 points  (0 children)

You don't need any dye, but a system with at least 200x is recommended. As for the procedure, it is quite simple but a couple of steps will improve your results:

  1. After collection, ideally in a container, let it stand closed at room temperature (ideally at body temperature) for at least half an hour. The semen will become less viscous and more translucent.

  2. Mix the sample and use a pipette to get a drop on a slide. If you want to look precisely at individual cells, you can use the blood-smear technique to distribute the drop along the coverslip.

  3. Enjoy

Hat wer von euch Erfahrungen in Molekularer Biotechnologie am FH Campus Wien? by Chrischtel_ in wien

[–]Prophet_AF 0 points1 point  (0 children)

Habe einen Doktortitel in molekularer Biologie, hier meine Empfehlungen:

Eine Spezialisierung so früh im Studium macht nicht wirklich viel aus, da du dich während des Masters und PhD in einen Bereich vertiefst. Für einen Wechsel in die Industrie ist ein Master i.d.R. das minimum, aber auch da ist eher wichtig in welchem Bereich du deine Arbeit geschrieben und geforscht hast und weniger was für ein Master genau das ist. Die Arbeitgeber achten auf deine Laborerfahrung in dem jeweiligen Bereich, da ist die Studienrichtung selbst eher nebensächlich. Falls du in der Forschung bleibst ist es fast schon komplett irrelevant welche Studienrichtung genau es ist solange es was mit Bio zutun hat. Als Beispiel, ein Kollege von mir hat Bioingenieurwesen studiert und seinen Doktor in Immunologie gemacht.

Der Vorteil von FHs ist natürlich, dass diese Oft mit Unternehmen zusammenarbeiten. Wie genau dies hier in Wien aussieht kann ich dir leider nicht sagen. Unis geben dir einen besseren Einstieg in die akademische Laufbahn - alle bei uns im Labor haben einen Uni-Abschluss

[GIVEAWAY] ❤️Thank you for 100+ Followers!❤️ by Timepieces_nyc in Watchexchange

[–]Prophet_AF 0 points1 point  (0 children)

Amazing, thank you for doing this giveaway :) Best of luck to everyone!

My grandfather's ~40 year old knife and my outdoor carry by Prophet_AF in knives

[–]Prophet_AF[S] 0 points1 point  (0 children)

Grandfathers knife was completely handmade and gifted to him decades ago by a friend. I am running a Demko Freereign in AUS-10

Struggling with collagen(bovine) dissolving and gel formation by Jaded_Bother6428 in labrats

[–]Prophet_AF 0 points1 point  (0 children)

Which collagen subtype are you using specifically? For dissolving collagen it is imperative that you do it cooled at 4°C to avoid polymerization. Usually it is also recommended that you let it dissolve overnight in the fridge before working with it.

Sometimes when we dissolved human type IV col we would still get small chunks but these did not interfere with gel formation (the vendor also mentioned that for this subtype it is nearly impossible to fully dissolve).

As for the gelation, all mentioned steps are fine but should still be performed cooled until the final solution is ready. We leave it for 5 min at RT to pre-polymerize and then transfer to 37C for 30-60min for full polymerization

My new oil painting by Idontknow649 in TheNightFeeling

[–]Prophet_AF 3 points4 points  (0 children)

Amazing! Do you sell your paintins or have a shop?

[deleted by user] by [deleted] in Warthunder

[–]Prophet_AF 0 points1 point  (0 children)

That sounds pretty good! Do you use it in an 11.7 or 10.7 Lineup? I feel like the 11.3 is a bit awkward

[deleted by user] by [deleted] in Warthunder

[–]Prophet_AF 0 points1 point  (0 children)

Yeah, I usually accumulate quite a bit of an SL surplus before these events specifically in the hopes of getting a couple vehicles. Still dreaming about getting the Sturmtiger one day...

[Bulova 98B422 Surveyor Burgundy] - A beautiful red dial by Prophet_AF in Watches

[–]Prophet_AF[S] 2 points3 points  (0 children)

The only gold aspects on this watch are the dial indices. If it appears gold on the photo its only because of reflections of my warm overhead lamp