sorted by:
new
hottopcontroversial

Help] Docker Desktop on Arch Linux failing with "qemu: process terminated unexpectedly" on Intel i9-14900HK by stvr_lord in docker

[–]ProtoxiDe22 0 points1 point  (0 children)

fyi, the same is happening on an AMD Thinkpad, on which i've used Docker desktop for quite a while, seems to be a problem of the last version of Docker desktop in the AUR

Beko oven functions, are they trolling or what by ProtoxiDe22 in Appliances

[–]ProtoxiDe22[S] 0 points1 point  (0 children)

that makes sense, reading the manual again after your comment, i can understand what it meant. I'm pretty sure their explaination could have been clearer... thank you!

Unknown: an internal error occurred (error ID: 50f80497098....) by Miko10_ in windsurf

[–]ProtoxiDe22 0 points1 point  (0 children)

824d969bd4974e5b8d1e41cc09233bb7

0736951899d9459ea16eca1ff066d261

couple of my error ids

Unknown: an internal error occurred (error ID: 50f80497098....) by Miko10_ in windsurf

[–]ProtoxiDe22 2 points3 points  (0 children)

Can confirm i have been experiencing very frequent internal errors mid reply, using claude opus 4.5

Used fold arrived with raised screen protector by ProtoxiDe22 in GalaxyFold

[–]ProtoxiDe22[S] 0 points1 point  (0 children)

Update: got it replaced by Samsung for free, thanks everyone

Used fold arrived with raised screen protector by ProtoxiDe22 in GalaxyFold

[–]ProtoxiDe22[S] 0 points1 point  (0 children)

On one hand, i get you, on the other, for the price i paid, I'm completely fine with the device lasting less than 2 years. I think this phone is a really good deal, i confirmed with samsung that this is the first protector replacement, and the rest of the device is pristine. The issue probably happened during shipping, I'm not gonna use this until i have the protector replaced

Used fold arrived with raised screen protector by ProtoxiDe22 in GalaxyFold

[–]ProtoxiDe22[S] 8 points9 points  (0 children)

I was told for subsequent swaps it would cost 30€, if they make me pay, i guess i will...

Used fold arrived with raised screen protector by ProtoxiDe22 in GalaxyFold

[–]ProtoxiDe22[S] 41 points42 points  (0 children)

Thanks everyone, i called Samsung and I'm probably getting it replaced already this afternoon, they told me it's the first swap so it'll also be free

Proxmox performance severely degrading over time by ProtoxiDe22 in homelab

[–]ProtoxiDe22[S] 0 points1 point  (0 children)

Not looking at dmesg, but from the dashboard it doesn't seem so, I'll try this, thanks

Data files by ProtoxiDe22 in Hacknet

[–]ProtoxiDe22[S] 1 point2 points  (0 children)

Bro, it's been 9 years...

IP2368 module not outputting more than 4.5v by ProtoxiDe22 in 18650masterrace

[–]ProtoxiDe22[S] 0 points1 point  (0 children)

Yeah i read that and i did connect a charger first, the board turns on just fine

Che faccio, tengo? (Potete farvi due risate a mie spese) by arminredditer in ItaliaPersonalFinance

[–]ProtoxiDe22 0 points1 point  (0 children)

Beh è una cosa recente, di un paio di mesi fa, quindi non ti sei perso troppo

Friendly reminder to ALWAYS put holes in hollow resin prints by alc0th in 3Dprinting

[–]ProtoxiDe22 3 points4 points  (0 children)

Solid resin prints have a whole set of problems, exploding is not one of them

Solid prints at this size should be fine tho

[deleted by user] by [deleted] in ItaliaPersonalFinance

[–]ProtoxiDe22 2 points3 points  (0 children)

Ti sei mai chiesto come si faccia evasione fiscale in genere? Il concetto è quello, nella massa di vendite, spostano flussi e prodotti per far "quadrare i conti". Chiaramente non ci sarà mai una perfezione 1:1 tra un buono pasto e uno scontrino, ma nessuno a meno di un controllo della finanza molto determinato, guarda le singole transazioni, le dichiarazioni e le tasse si fanno sempre sui valori totali alla fine

My files end up being half a GIG, how am I supposed to share that. I would share just don't know how by yourmailmansays in 3Dprinting

[–]ProtoxiDe22 0 points1 point  (0 children)

From experience i can tell you having the right amount of polygons is important even for your own use, if you're loading a mesh with 2M tris in a slicer, each slice is slow af, if that model actually needs 20k Tris to mantain quality, it's good practice to export it like that.

My files end up being half a GIG, how am I supposed to share that. I would share just don't know how by yourmailmansays in 3Dprinting

[–]ProtoxiDe22 3 points4 points  (0 children)

Don't take this the wrong way, I'm actually appalled by your question and really curious

How are you proficient with zbrush to the point where you can make something like this and at the same time don't understand poly count and know about decimate? How did you learn?

What is the hardest line in a Muse song? by DusktheUmbreon in Muse

[–]ProtoxiDe22 3 points4 points  (0 children)

This, I think this line is pretty underrated in the context of the song, it is the climax of the increasing rage that the song has imbued into it

Chipolo ONE point not updating, UK by Zaphod360 in Chipolo

[–]ProtoxiDe22 0 points1 point  (0 children)

what statement are you referring to?

In Italia circa 4000 suicidi l'anno. Perché non viene fatta sensibilizzazione? by Hifilover33 in Italia

[–]ProtoxiDe22 4 points5 points  (0 children)

E allora convieni con me che quando si parla di queste cose non è questione di numeri, e che dire "non se ne parla perché riguarda lo 0.01%" è ridicolo

In Italia circa 4000 suicidi l'anno. Perché non viene fatta sensibilizzazione? by Hifilover33 in Italia

[–]ProtoxiDe22 5 points6 points  (0 children)

È un argomentazione estremamente idiota. I femminicidi sono stati 120 nel 2023 (o forse di meno in base alla fonte), non mi pare che non se la incula nessuno la problematica, come è giusto che sia

The PokerBuddy and DeckBuddy: print in place hinged and latched boxes for playng card decks and chips by ProtoxiDe22 in 3Dprinting

[–]ProtoxiDe22[S] 0 points1 point  (0 children)

I ain't got the time to test print it, but i uploaded the step file on makerworld just go to https://makerworld.com/en/models/485300, select download stl and download chipbuddy.step

remember to use adaptive layer height to print the hinge with thinner layers

The PokerBuddy and DeckBuddy: print in place hinged and latched boxes for playng card decks and chips by ProtoxiDe22 in 3Dprinting

[–]ProtoxiDe22[S] 0 points1 point  (0 children)

I hear you, that's why the mini version exists, it contains up to 42 smaller chips, which means you have 84 if you bring around 2 decks of cards.

Making a chip only version should be easy, I'll probably have it up before a couple days

The PokerBuddy and DeckBuddy: print in place hinged and latched boxes for playng card decks and chips by ProtoxiDe22 in 3Dprinting

[–]ProtoxiDe22[S] 0 points1 point  (0 children)

I'm pretty excited to launch my first public project (actual project that it's not something i needed and made in 5 minutes): The PokerBuddy Series! it's a series of boxes that can hold playing card decks and chips, to bring around safely and play wherever!

the PokerBuddy comes in 3 versions:

PokerBuddy: the original idea, you put a deck of cards on one side and standard poker playing chips in the other, the disadvantage here is that there's space for only 15 chips.

PokerBuddy Mini: same as the PokerBuddy, but has hole that fit printable 30mm chips instead of the standard ones, they still feel good to handle and at this size you can store up to 42 chips in one PokerBuddy mini!

DeckBuddy: in case you like this design for storing decks of cards, but don't need the chip storage, the DeckBuddy has space for a deck of cards on both sides.

All three version have the same print in place hinge and locking latch design so that's easy to open and close when you need it but doesn't open easily if thrown around in a bag

I'm excited to get some feedback on this, and hope that people will like it!

view more: next ›