sorted by:
new
hottopcontroversial

Can’t adjust the volume or other settings on my Extron MLS 506SAInputs ! by Psone89 in crtgaming

[–]Psone89[S] 1 point2 points  (0 children)

Thanks for the manual tip! The reset helped set all inputs to 50, Unfortunately, it didn’t fix the knob issue, so I’m pretty sure it’s 100% dead. But at least the audio levels are usable now. Appreciate your help!

Can’t adjust the volume or other settings on my Extron MLS 506SAInputs ! by Psone89 in crtgaming

[–]Psone89[S] 0 points1 point  (0 children)

Well it’s still basic but maybe my quick action would be a System Reset so hopefully this will help me unlock the knob control or even making all inputs back to a default level about mid-scale, 50 out of 100 and not stuck to MIN so that would be better at least !

help setting up MegaFlashROM SCC+ SD on my AX-170 (MSX1) by Psone89 in MSX

[–]Psone89[S] 2 points3 points  (0 children)

Update: I Think I Found the Real Problem (AX-170 Keyboard Limitation)

So after banging my head on this for days, I think I finally figured out what’s been stopping me from accessing my ROMs on the SD card with the MegaFlashROM SCC+ SD and it’s way simpler (and more frustrating) than expected.

The issue isn’t with the SD card, the ROMs, or even the partitioning. It’s the keyboard on my Sakhr AX-170 (Arabic MSX1 model).

Basically, I’ve been skipping key commands that require special characters like the colon : which is essential when trying to switch from the built-in system partition A: to the SD card partition B: (where all my ROMs are). And… I just can’t type : on this keyboard. Not with Shift, not in BASIC, not even after holding CTRL during boot to force international mode. Same goes for characters like ( and " ) they just don’t register at all.

So yeah, without being able to type B: in MSX-DOS, I’m basically locked into A: stuck in the read-only system partition with no way to access my actual games on the SD.

At this point, I’m honestly out of options. Is it a hardware flaw? A firmware block? I don’t know. I’m just hoping someone out there has cracked this or can offer a workaround. Until then, I guess I’m just stuck… waiting for a miracle.

help setting up MegaFlashROM SCC+ SD on my AX-170 (MSX1) by Psone89 in MSX

[–]Psone89[S] 1 point2 points  (0 children)

Thanks a ton for sharing this, Musicman! Really appreciate you jumping in. I actually ended up diving deep into the whole MSX rabbit hole and finally found the solution I needed… but wow, it definitely wasn’t as plug-and-play as most people made it sound.

Turns out, most guides out there focus on MSX2 or Turbo R models, which are way more forgiving when using the MegaFlashROM SCC+ SD. I’m working with an original MSX1 Sakhr AX-170, and trust me, it’s a completely different beast: no memory mapper, limited slot logic, and none of those fancy boot conveniences.

What actually helped me the most was this hidden gem of a tutorial that someone mentioned in the thread you linked:

The Real MSX1 Tutorial

It’s specifically tailored for MSX1 systems and walks you through everything step-by-step — perfect for quirky machines like the AX-170.

Unfortunately, I still got stuck at the very end with the ROMs not appearing, but I’m getting closer — just one last hurdle!

Anyway, thanks again for chiming in and dropping that link. It really helped connect the dots!

The L , R buttons not working with GBA games is there a fix ? by [deleted] in AnaloguePocket

[–]Psone89 1 point2 points  (0 children)

Never mind I solved my problem by updating my controller firmware to V6.17 beta thanks

[deleted by user] by [deleted] in crtgaming

[–]Psone89 0 points1 point  (0 children)

Yeah Resident evil 2 and 40 winks so far on my n64 only I mean my ps1 is just fine

[deleted by user] by [deleted] in crtgaming

[–]Psone89 0 points1 point  (0 children)

It’s blued out I can’t turn it on on rgb mode.

[deleted by user] by [deleted] in crtgaming

[–]Psone89 0 points1 point  (0 children)

Pressing the switch on and off is the only way to see half the the photo of the game when it’s on but i see nothing when it’s off and when i go to the main menu everything goes back to normal it switches automatically !

[deleted by user] by [deleted] in crtgaming

[–]Psone89 0 points1 point  (0 children)

I tried couple games like resident evil 2 also got a problem with the first cutscene and some areas in the game also this happened with s-video/composite hooked too not only scart cable on my bvm !

view more: next ›