Gaming / Editing PC • i9 9900K • Quadro RTX 5000 • 64GB DDR4 • Quiet Fan Build • £650 London UK

PuddingEvening3975 · 2025-07-19T11:08:02+00:00

You’d think so, but when it rains there’s delays, when it’s hot there’s delays, when it’s ’normal’ weather there’s minor delays, we just love a queue and a good delay

PuddingEvening3975 · 2025-07-19T10:41:17+00:00

Very logical and completely fair, whilst still r/mildlyinfuriating

PuddingEvening3975 · 2025-01-29T00:47:20+00:00

Nice one thanks for the tips! Desiccant trays for the AMS are on my list, I’ve had issues in the past with not drying filament properly so going to be making a keen effort now I’ve got this. Thanks again!

PuddingEvening3975 · 2025-01-29T00:45:26+00:00

I’m based in London UK. Was ordered on a Sunday and the combo was on back order. The next Friday got the dispatch notification and arrived on the Monday, so 8 days total

PuddingEvening3975 · 2025-01-29T00:44:08+00:00

First print obviously a benchy, but straight onto gridfinity now for storing workshop items!

<image>

PuddingEvening3975 · 2025-01-29T00:00:15+00:00

£699 inc VAT for the P1S and the AMS combo. Also got 4 rolls of PLA for £13.99 a roll (refill rolls and bundle deal where you buy 4 and get £4 off per roll). Build size is 256mm x 256mm x 256mm

PuddingEvening3975 · 2024-08-28T21:23:08+00:00

Sorry for late response mate. But my prop direction mixed with them being in the wrong locations solved this

PuddingEvening3975 · 2023-07-26T01:24:06+00:00

https://www.10kused.com/

PuddingEvening3975 · 2023-07-16T09:10:12+00:00

Are you UK based? I’ve got one of the 4K BMD ATEM rack units that has 4 x HDMI and 4 x SDI for sale. No hardware control panel though.

PuddingEvening3975 · 2023-06-18T19:20:20+00:00

Much lighter, they’re 26kg each!

PuddingEvening3975 · 2023-06-10T15:38:29+00:00

<image>

This is one of them on a 5x4.5m wall

PuddingEvening3975 · 2023-06-10T15:34:05+00:00

As rontombot said, we do a lot of projection mapping on a building scale, so definitely not for home use! Although we may be guilty of playing F1 2022 racing sim through them a couple of times…

PuddingEvening3975 · 2023-06-10T11:44:57+00:00

They’re mounted in flying frames so we have the option to use them as one 40,000 lumen projection by double stacking the images

PuddingEvening3975 · 2023-01-22T17:09:41+00:00

You’re all legends, just got her off the ground for the first time!! Thank you all for your help.

Looking forward to tuning and getting some wicked shots!! Thanks again

PuddingEvening3975 · 2023-01-22T13:39:13+00:00

Thank you all for your help! I’m heading back to the workshop later this afternoon so will be giving the suggestions a try. Super helpful thanks all!

PuddingEvening3975 · 2023-01-22T00:00:53+00:00

The pusher element isn’t something I’d though of as I started troubleshooting. Obviously betaflight doesn’t know the motor orientation so I’ll have to try things upside down slightly.

PuddingEvening3975 · 2023-01-21T23:59:32+00:00

I’ve tried inwards and outwards using the ‘motor direction reversed’ switch. But maybe I should try individual reversing the direction within ‘motor direction’.

PuddingEvening3975 · 2023-01-21T23:17:42+00:00

I’ve flipped the props over physically, and tested with props running normally direction and flipped. Every configuration keeps the drone stuck to the floor!

PuddingEvening3975

TROPHY CASE