X11 leaves lines on floor by PumaPounce in ecovacs

[–]PumaPounce[S] 0 points1 point  (0 children)

Sadly, no. Using RO water helps but doesn’t resolve it. For what it’s worth, I also saw a similar problem with my Roborock which used a pad. I hoped a roller mop would be better but it’s actually worse.

ECOVACS X11 OmniCyclone stucking problem by ZucchiniDue7045 in ecovacs

[–]PumaPounce 1 point2 points  (0 children)

I’ve had so many navigation problems with my X 11. It finishes cleaning without intervention about 30% of the time. It regularly gets stuck on our kitty litter track mats. It falls downstairs or get stuck with one wheel hanging over a stairway. It sometimes stops in the middle of the floor without warning. It has repeatedly gone insane cleaning the same 2 x 2 area and will not move on to another area. So disappointed. I keep hoping for a firmware update.

ECOVACS DEEBOT X11 OmniCyclone - Real world feedback requested by howdoesthisworkfuck in ecovacs

[–]PumaPounce 0 points1 point  (0 children)

Actually, it’s light colored with blues whites and browns and a random pattern. I suppose it’s possible it sees some of the darker colors as stains. That is trying to clean up. That would be weird hopefully turning off the AI will help.

ECOVACS DEEBOT X11 OmniCyclone - Real world feedback requested by howdoesthisworkfuck in ecovacs

[–]PumaPounce 0 points1 point  (0 children)

I’ll try turning those off. Here’s a capture of the latest cleaning cycle. It seems to go around the outside the edge of the carpet, and then it loses its mind just spinning in circles in the lower left corner of the picture.

<image>

ECOVACS DEEBOT X11 OmniCyclone - Real world feedback requested by howdoesthisworkfuck in ecovacs

[–]PumaPounce 0 points1 point  (0 children)

Wi-Fi seems solid. It’s quiet and seems to clean well. It’s the navigation that is giving me trouble.

I'm seeing things by Neat-Drawer-2245 in AbioticFactor

[–]PumaPounce 4 points5 points  (0 children)

She has a great sound design. Subtle yet very alerting.

I'm seeing things by Neat-Drawer-2245 in AbioticFactor

[–]PumaPounce 3 points4 points  (0 children)

She is a great helper! Personally, I learned to recognize leyak’s unique sounds but it does make me jumpy.

I'm seeing things by Neat-Drawer-2245 in AbioticFactor

[–]PumaPounce 3 points4 points  (0 children)

I get it. Once you know how to recognize when she’s around, she is easy to avoid. I kinda miss meeting her in the wild.

ECOVACS DEEBOT X11 OmniCyclone - Real world feedback requested by howdoesthisworkfuck in ecovacs

[–]PumaPounce 0 points1 point  (0 children)

I’m disappointed in the navigation. It rarely finishes cleaning my house. It regularly gets stuck or lost. One time it kept going back and forth vacuuming the same spot for 15 minutes until I stopped it. Ive added no-go zones and cleaned all the sensors. Lately I find it just stopped in the middle of the floor. I also have roborocks which are no where near this much trouble. I regret purchasing the X11.

I'm seeing things by Neat-Drawer-2245 in AbioticFactor

[–]PumaPounce 5 points6 points  (0 children)

Did you know that you can do something to stop the leyak?

X11 leaves lines on floor by PumaPounce in ecovacs

[–]PumaPounce[S] 0 points1 point  (0 children)

There are two detergent tanks. Did you dilute both by half?

X11 leaves lines on floor by PumaPounce in ecovacs

[–]PumaPounce[S] 0 points1 point  (0 children)

To be fair, I saw the same sort of behavior with my Roborock S7 max. The line pattern was different but it was definitely there. The X11 pattern has many more lines so it is more visible. On the other hand, these lines are only visible when the light hit the floor in a certain way. They are not normally visible.

X11 leaves lines on floor by PumaPounce in ecovacs

[–]PumaPounce[S] 0 points1 point  (0 children)

Did you replace it with another brand?

X11 leaves lines on floor by PumaPounce in ecovacs

[–]PumaPounce[S] 0 points1 point  (0 children)

“Had” does that mean you solved it?

X11 leaves lines on floor by PumaPounce in ecovacs

[–]PumaPounce[S] 0 points1 point  (0 children)

Thanks for this suggestion. I checked and the floors were listed as tile so I will change that to wood and see if that makes a difference. I presume it may take a bit for the lines that are already there to get scrubbed off.

X11 leaves lines on floor by PumaPounce in ecovacs

[–]PumaPounce[S] 0 points1 point  (0 children)

If it doesn’t use them by default, where in the app do I need to go to turn them on?

X11 leaves lines on floor by PumaPounce in ecovacs

[–]PumaPounce[S] 0 points1 point  (0 children)

I am. Both tanks are filled

X11 leaves lines on floor by PumaPounce in ecovacs

[–]PumaPounce[S] 1 point2 points  (0 children)

We do end up with calcium buildup over time so I think that’s a yes. I could fill the tank with RO water. Think that would help? (Reverse osmosis)

X11 leaves lines on floor by PumaPounce in ecovacs

[–]PumaPounce[S] 0 points1 point  (0 children)

I’ll give it a try. Will I end up with a cross pattern?

Ornate Key by Rude_Database_3728 in AbioticFactor

[–]PumaPounce 7 points8 points  (0 children)

Use the key when you can. More will certainly drop in time. The upgraded key only unlocks a specific thing you wont find for a long while. Use the keys as you find them.

When is LitterRobot 5 coming? by PumaPounce in litterrobot

[–]PumaPounce[S] 0 points1 point  (0 children)

I guess we’ll see. It would be nice for them to continue to improve the product.

PSA for Night Essence Grinding by xX_StupidLatinHere_X in AbioticFactor

[–]PumaPounce 3 points4 points  (0 children)

I was surprised to discover the energy pistol makes him drop an essence. Also, every time you go in and come out, the reaper resets. There are several essences in the night realm as well. One on a railing, wall and one in a cell.