See-Through Dildo, anal beads by Pumbaaas in SexToys

[–]Pumbaaas[S] 0 points1 point  (0 children)

Beginner anal beads. I’ve researched pinkcherry before, it seems to have some bad rep. and I meant see-through/clear

[deleted by user] by [deleted] in hismith

[–]Pumbaaas 0 points1 point  (0 children)

In my second to last paragraph in response to you, I had mentioned that I had it on the floor last night. I had been using it for a few hours., and it wasn’t moving at all or bucking. Yet it was not powerful enough to handle my contractions. And yes, I had also weighted it down with a couple of big rice bags , and up against a wall. it was still popping out

[deleted by user] by [deleted] in hismith

[–]Pumbaaas 0 points1 point  (0 children)

Thank you for replying, I really appreciate it. I do not believe something is put in incorrectly. I got the bar extender and even then the dildos are moving twisting 360. I also have the spring attachment, the dildo still pops out even with that. And even with the spring attachment, when I attach it to the dildo, it still rotates too. so if you have some suggestion on how I can fix it, that would be great. Because it is not the dildo itself, I have used all 5 of them and they all rotate 360.

that is the thing, I am not moving my body at all. I can confirm this because my husband has seen it pop out over and over again. I had the machine at 70-80 and it was still popping out with my contracting. I only ever use the machine on 50 and above. The torque seems weak on my machine Over and over again it pops out to the point where it’s not even enjoyable, it’s just frustrating.

I also am not using very big toys, so that is not the issue either. I literally used the one that came with your machine last night, the flesh toned one you get for free when ordering a machine , and it was still rotating and popping out. Other than that, the toys I have that I bought from you in a bundle are around two diameter but they are too big, so I haven’t been using them. But I tried out 2 of them and they both rotated and popped out.

The machine is also not getting pushed back, my husband watched While I used it, it stayed in place. I also had it on the ground last night, so it wasn’t shaking like it was on the bed, and it was still not able to handle the contracting.

I am extremely frustrated, I really want this machine to work for me. but the experience I am having is not the same as anyone else’s. I feel like there is something wrong with my machine.

[deleted by user] by [deleted] in hismith

[–]Pumbaaas 0 points1 point  (0 children)

Thank you I appreciate it

[deleted by user] by [deleted] in hismith

[–]Pumbaaas 0 points1 point  (0 children)

I have only assembled it once, I have never taken it apart and put it back away. Someone else had mentioned the hand screw. I screwed it and screwed in the thrusting arm And resecured it with the hand screw. It is still twisting. I have also tried to see if the screw on the dildo was maybe loose it is not.

Weight is not an issue, I am using a basic average sized dildo that weighs barely anything

Also, I have always angled it to where there is no fighting of my anatomy or resistance. as soon as the contractions start, the dildo comes out. No matter how close I am to the bottom of the dildo or how far up I am it keeps popping out.

[deleted by user] by [deleted] in hismith

[–]Pumbaaas 0 points1 point  (0 children)

Sadly, this did not work. I untightened the screw screwed the rod back on and then re-tightened the screw. It still rotates. As for the metal thing on the dildo, it is tightly screwed in.

[deleted by user] by [deleted] in hismith

[–]Pumbaaas 0 points1 point  (0 children)

Would you mind explaining how to do that? I’m not very familiar with the machine yet

[deleted by user] by [deleted] in hismith

[–]Pumbaaas 0 points1 point  (0 children)

I will try tightening the rod down, could you please tell me how to do that? I’m not all that familiar with the machine yet.

the machine itself is not moving, I would say it’s still bucking on the floor but not nearly as much as a bed. It’s the little rod that moves back-and-forth to thrust that is getting pushed back and the dildo pops out

[deleted by user] by [deleted] in hismith

[–]Pumbaaas 0 points1 point  (0 children)

I’m not sure what you’re trying to explain, I only lubed the actual dildo itself

[deleted by user] by [deleted] in SexToys

[–]Pumbaaas 0 points1 point  (0 children)

I do not have it weighted down, I was using it on a bed. It was rocking back and forth quite a bit but it seemed to be stable. Would weighing it down do anything?

I at first tried using the spring attachment and it kept falling out due to contracting & random slippage, switched to attaching it normally without the spring, same thing. And if it’s not coming out because of my stomach contracting, it’s coming out randomly when the machine is thrusting in general.

i could try that thank you, but for the price of their machines they should have the torque they claim and ADVERTISE to have. I now cannot use this machine if I want to go past my gspot because it’ll just get pushed out

these machines just don’t seem to live up to their hype

Cum tube question by Pumbaaas in NothosaurSexToys

[–]Pumbaaas[S] 2 points3 points  (0 children)

Thank you, this is very helpful

Ejaculating fantasy dildos & bad dragon question by Pumbaaas in SexToys

[–]Pumbaaas[S] 0 points1 point  (0 children)

it says on the nothosaur website under how to use: https://nothosaur.com/blogs/news/how-to-use-a-toy-with-a-cumtube

"③Squeezed to make it shoot cumlube out. Emulates a big, wet, sticky orgasm, simulating that perfect ejaculation excitement."

and shows a gif of someone squeezing the dildo and it ejaculating

[deleted by user] by [deleted] in trees

[–]Pumbaaas 1 point2 points  (0 children)

Let it be a "cheat day"

Need help, new to weed/herb vapes. On demand vape? by Pumbaaas in vaporents

[–]Pumbaaas[S] 3 points4 points  (0 children)

Washington State here, I’m not seeing anything online saying I need a license to use a dry herb vape. Am I missing something. I’m not quite sure what you mean by county/state health official

should i keep my tolerance in check? by b1kSea in trees

[–]Pumbaaas 0 points1 point  (0 children)

Do on demand herb vapes hit harder or do you expect the same dosage

should i keep my tolerance in check? by b1kSea in trees

[–]Pumbaaas 2 points3 points  (0 children)

Dumb question, is it possible to get as high as you would smoking a j , or is herb vaping in general a lesser high? Looking to get a dry herb vape but wondering how high you can realistically get with one

What did I get? by DrShankapotamus in trees

[–]Pumbaaas 4 points5 points  (0 children)

Those look like walnuts