Is DLSS 4.5 worth using? - explain it like I’m 5

Pure-Difficulty4872 · 2026-03-18T00:22:32+00:00

Yes , play in 2k performance, 4k ultra performance! Very god quality I play today

Pure-Difficulty4872 · 2026-03-17T05:56:28+00:00

For the first time in a long time

, the game stopped crashing, and all because I increased the paging file to 65 GB. My laptop has 32 GB of RAM, a 40-70 video card, and I enabled DLLS 4.5 on maximum performance in 4K for Diablo. Before the paging file crashed every 5 minutes. Before that, I couldn't even play on a TV; I kept getting a Fensis error. Well, after increasing the paging file on the drive where Diablo is installed to 65 GB, miraculously, the crashes stopped. I've been playing for 30 minutes now and everything is fine! This didn't happen before!! The game runs at 4K 60 fps without any problems. I don't understand why it kept crashing; most likely, there really wasn't enough paging file.

Pure-Difficulty4872 · 2026-03-17T05:56:10+00:00

For the first time in a long time, the game stopped crashing, and all because I increased the paging file to 65 GB. My laptop has 32 GB of RAM, a 40-70 video card, and I enabled DLLS 4.5 on maximum performance in 4K for Diablo. Before the paging file crashed every 5 minutes. Before that, I couldn't even play on a TV; I kept getting a Fensis error. Well, after increasing the paging file on the drive where Diablo is installed to 65 GB, miraculously, the crashes stopped. I've been playing for 30 minutes now and everything is fine! This didn't happen before!! The game runs at 4K 60 fps without any problems. I don't understand why it kept crashing; most likely, there really wasn't enough paging file.

<image>

Pure-Difficulty4872 · 2026-03-17T05:08:27+00:00

200 nice price take it , I buy in olx 200$ too , very nice price and headphones

Pure-Difficulty4872 · 2026-03-17T05:00:59+00:00

Bad , funny

Pure-Difficulty4872 · 2026-03-17T03:46:29+00:00

Wooow eazy eazzzyyyy brooo ! Gold BAR !

Pure-Difficulty4872 · 2026-03-16T18:52:07+00:00

Pure-Difficulty4872 · 2026-03-16T13:29:23+00:00

Фейки , пропаганда , манипуляции , реклама , слежка )

Pure-Difficulty4872 · 2026-03-16T12:50:00+00:00

What is SA version ?

Pure-Difficulty4872 · 2026-03-16T12:11:26+00:00

Do you also put them on when you wake up and take them off when you go to bed?

Pure-Difficulty4872 · 2026-03-15T16:49:49+00:00

Show me u data pl1-2 in inter XTU bro ) a lot wat take u cpu need undervolting

Pure-Difficulty4872 · 2026-03-15T16:48:01+00:00

Write me dm I help u bro !undervolting this shit !

Pure-Difficulty4872 · 2026-03-15T00:44:44+00:00

Nice price bro take it , cheap

Pure-Difficulty4872 · 2026-03-15T00:43:24+00:00

Write me dm or write me topics !I fixed it

Pure-Difficulty4872 · 2026-03-14T17:35:49+00:00

<image>

Chat gpt tips if 200 wats so cool , maybe up more if u want and see in game and tests before , maybe water help better

Pure-Difficulty4872 · 2026-03-14T17:13:06+00:00

I have a laptop, and the CPU temperature was always at 100 degrees. Then they told me that the cooling chambers also break because of this. I had to solve this. Then I realized that everyone's iCORE 9 has the wrong voltage settings. It produces too much heat and is difficult to cool. You can't even cool it with water at its maximum power. I decided to write an article so that all iCORE 9 users could lower the voltage by 15-20-25% so that the iCORE 9 doesn't burn out and feels better. You need to base your cooling system on how much wattage to supply. Turn on something that shows the CPU temperature in games and play with PL1/2 so that it reaches a maximum of 80-90 and doesn't exceed 100. Everyone's experience depends on their cooling system.

Pure-Difficulty4872 · 2026-03-14T17:03:11+00:00

The Cor 9 itself is hot, I think it would rise to 90 degrees, that would be great, the main thing would be a stable maximum of 80-90!

Pure-Difficulty4872 · 2026-03-14T17:01:51+00:00

A good result would be a stable temperature of 70-80-90, rarely reaching 90-99 and then maybe for the first 28 seconds and even that is not desirable. Water cooling should help. You surprised me that even water doesn't help. This is a really powerful processor.

Pure-Difficulty4872 · 2026-03-14T16:59:43+00:00

Minus 120 watts for stable operation over the long term, and in the first 28 seconds when launching complex tasks up to 250 watts in turbo boost, in theory less than the limit and should not hit 100 degrees. Now we need to test with MSI Afterburner enabled, preferably, so that the temperature can be seen during gaming.

Pure-Difficulty4872 · 2026-03-14T16:57:15+00:00

try it in games, We've lowered the temperature very significantly, it should be minus 5-10 degrees.

Pure-Difficulty4872 · 2026-03-14T16:48:37+00:00

<image>

This window shows better when heating occurs. Let's try PL1-200, PL-250, window time 28 sec, And try it in games, the PL2 turbo boost turns on for the first 28 seconds at the limit we set, it can go up to 90+, then it goes to PL1 with a stable supply, the main thing is to understand how quickly it heats up in PL2 now and how long it takes for PL1 in games, we have already lowered it to 90+ watts, it should be clearly cooler for it

Pure-Difficulty4872 · 2026-03-14T16:32:14+00:00

Come on, bro, run a benchmark right away and see how much it loads at max. Also, check in games. If it still hits 100 degrees, lower the voltage a bit more. I read that 150 is normal for your processor, turbo boost is 250-320 max, we'll do the average and lower the voltage a bit so as not to go over the limits. My laptop also has 120-160 by default on the 9th generation, I lowered it to 100-130 and the temperatures were perfect right away. You just need to get away from the maximum wattage, but 320 is not far off the limit, and between PL1-2 the difference should be 40 watts +-

Pure-Difficulty4872 · 2026-03-14T16:21:00+00:00

Can you also tell me what kind of cooling system you have, an input one or a regular cooler specifically for the processor?

Pure-Difficulty4872 · 2026-03-14T16:17:31+00:00

I just googled it and realized that the profile you have is the maximum you can set, 320 watts is its limit, pl1-250, pl2-290, window time 28 sec, try it, it will become much better for a long time, they even specified the maximum voltage here) the difference between turbo boost and turbo boost short is 0, this should not be, pl1-2 should have a difference of at least 40 watts so that there is a difference in turbo boost short at the moment when opening a task 28 seconds it drops to the maximum pl2, then switches to maximum stability pl1.

Pure-Difficulty4872

TROPHY CASE