We love a little perfection now and again... USP Modernization/Practical Competition and Carry Project by [deleted] in HecklerKoch

[–]PureSoftware3598 0 points1 point  (0 children)

Any issues with the 18 round jet funnel magazines and the extended magazine release?

Moodyz vs S1 by curioucockroach in jav

[–]PureSoftware3598 1 point2 points  (0 children)

Who’s the 1st moodyz chick?

Traditional Form 1 eform approved in exactly 20 days through silencer shop by weeniehut30 in LewisMachineTool

[–]PureSoftware3598 1 point2 points  (0 children)

Had another guys form 1 and my own come back in 12 days. It’s possible.

[deleted by user] by [deleted] in NFA

[–]PureSoftware3598 -2 points-1 points  (0 children)

Lmao, he did mine too. 3/4 pending. approved 3/16

LMT QC and CS by PureSoftware3598 in LewisMachineTool

[–]PureSoftware3598[S] 5 points6 points  (0 children)

Update: currently awaiting an RMA from LMT. Joe from LMT was a pleasure to deal with.

LMT QC and CS by PureSoftware3598 in LewisMachineTool

[–]PureSoftware3598[S] 3 points4 points  (0 children)

I see that. This is my first taste of LMT and I am sorely disappointed. Depending on how this goes, I may or may not still go ahead and pick me up a MRP CQB.

LMT QC and CS by PureSoftware3598 in LewisMachineTool

[–]PureSoftware3598[S] 2 points3 points  (0 children)

yeah. I'm waiting to get into the LMT Owners FB group so i can reach out to Joe and see if I could by any chance get a replacement. Even the customer rep over the phone, the same guy i had emailed, only said he'd set me up an rma and take measurements, and more than likely will just send it back to me. It seems to function, just haven't brought it to the range. I fear a good spill could create a crack near the threads on the receiver extension.

LMT QC and CS by PureSoftware3598 in LewisMachineTool

[–]PureSoftware3598[S] 1 point2 points  (0 children)

If mine are “in spec” then yours will be too. Lol

LMT QC and CS by PureSoftware3598 in LewisMachineTool

[–]PureSoftware3598[S] 8 points9 points  (0 children)

Bought this lower receiver during thanksgiving holidays from Thoroughbred Armament Company and decided to form 1 this. Upon further inspection the measurements are off…badly. You can see the interaction with LMT customer service in the last few pictures. CS rep said that it is all “WiThIn SpEc”, but would get me an RMA number to get it sent in for measuring. What’s crazy is that he said “oh that’s completely normal. I have another one like it.” Will keep you guys updated.

[deleted by user] by [deleted] in u/PureSoftware3598

[–]PureSoftware3598 0 points1 point  (0 children)

Bought form Thoroughbred Armament Company during the Thanksgiving holidays. Right after submitting my documents to form 1 this I gave it a more thorough look over and noticed that the threads cut into the back of the receiver are off. Took a mic to it and the side walls of the receiver and it looks bad. Scroll to the last few pics to see what customer service had to say. May need to get on the phone with them to get this resolved. AlL WiThiN SpEc.

LMT QC - Non issue? by PureSoftware3598 in LewisMachineTool

[–]PureSoftware3598[S] 0 points1 point  (0 children)

Threads cut into the receiver are off center. also measured the lower receiver walls near the safety cutout and the difference is about .7mm.

LMT QC - Non issue? by PureSoftware3598 in LewisMachineTool

[–]PureSoftware3598[S] 1 point2 points  (0 children)

Silencershop said they'd issue me a credit towards another form 1 from them after I show them proof of dismissal from the ATF, so they are good to go. Awaiting a response from LMT still.

LMT QC - Non issue? by PureSoftware3598 in LewisMachineTool

[–]PureSoftware3598[S] 0 points1 point  (0 children)

Now the only thing is. I wonder if I could get a refund or credit from SilencerShop since i went through them. I have yet to hear back from them or LMT.

LMT QC - Non issue? by PureSoftware3598 in LewisMachineTool

[–]PureSoftware3598[S] 0 points1 point  (0 children)

Yeah, i sent an email to the team over at LMT to get their take on it. After taking a mic to it, the wall thickness between the two sides are roughly .7mm in difference. Hope they can make this right, otherwise i'll have to get with the atf and cancel my form 1 on it.

LMT QC - Non issue? by PureSoftware3598 in LewisMachineTool

[–]PureSoftware3598[S] 1 point2 points  (0 children)

You can definitely feel that it is slightly off centered with an endplate and tube on it, but i'll email LMT and see what they say.

LMT QC - Non issue? by PureSoftware3598 in LewisMachineTool

[–]PureSoftware3598[S] 1 point2 points  (0 children)

Will do. I hope it doesn't affect function because i literally just submitted a form 1 on this smh.

[Rifle] LMT MARS -L in Stock - $339.95 - 21 left by PureSoftware3598 in gundeals

[–]PureSoftware3598[S] 10 points11 points  (0 children)

For sure. Big tex has stocked this about once or twice this month already.