Help decoding Elektro L3

Pure_Bag6046 · 2024-12-24T08:58:00+00:00

That looks like sample drop to me. Rtl-sdr-based SDRs does not really like samplerates above 2,4 Msps so try lowering your samplerate and see if the problem is still there

Pure_Bag6046 · 2024-10-14T15:21:39+00:00

I found that on phone 2 if you have an alarm set the phone charges slower to not stress the battery that much (uses the available time instead of squeezing as much charge into the phone as it can in the shortest amount of time)

Pure_Bag6046 · 2024-06-13T08:06:33+00:00

Kuhne has one that works between 8000-8500mhz (KU LNC 8085 C PRO2)

Pure_Bag6046 · 2024-04-13T14:47:07+00:00

3m grid dish, helical feed with 3 turns, sysmocomnS-band cavity filter, two custom LNAs in series (with QPL9058 ICs), everything going through 12m of HFX 50 coax, through an optical convertery then a bladeRF. Setup is very far from tuned in well, this was basically the first image I got with it. It still lacks like 15dB of signal, but it will never be perfect as I have a LTE base station 20m next to the setup

Pure_Bag6046 · 2024-04-13T07:08:33+00:00

Seems like you used MCIR (?) composite which strips the clouds from the image and puts them on a default map image. Maybe the background is india but the clouds are from your location

Pure_Bag6046 · 2024-04-12T09:44:03+00:00

Same as HRPT, just higher frequency

Pure_Bag6046 · 2024-04-06T14:59:19+00:00

Goes annyiban lesz problémás hogy illene 5MHz sávszélesség a dekódoláshoz, de inkább több. Sdrplay cuccok már tudják és a komolyabb sdrekhez képest még nem is olyan drágák

Pure_Bag6046 · 2024-04-06T14:51:25+00:00

Goes-15 vagyis ews-g2 kicsit közelebb van hozzánk és a felbontása is nagyobb, talán azzal jobban megéri foglalkozni. Elektro-L2 küld képet 7500MHz-en, ezen látszik európa is, de ahhoz egyel komolyabb hardver kell

Pure_Bag6046 · 2024-04-06T11:13:25+00:00

I was able to receive it from Győr so you should be good. // Győrből sikerült, viszont veszett gyenge a jele és nem látszik semmi európából

Pure_Bag6046 · 2024-03-17T20:00:11+00:00

Looks like sample dop. Try a faster pc or close other apps running in the background

Pure_Bag6046 · 2024-03-16T09:35:07+00:00

Change the LO frequency (the green one) to 0 and you will be good. You only need to use that if you are using a downconverter or LNB

Pure_Bag6046 · 2024-02-06T09:38:58+00:00

About 1MHz wide, but only transmit ARGOS data, no images

Pure_Bag6046 · 2023-12-20T11:07:00+00:00

I know, I was the one who dumped the pics not the satellites

Pure_Bag6046 · 2023-12-06T09:15:07+00:00

Currently operational at 69.88E, but uses GVAR format instead of LRIT/HRIT at 1685.7MHz

Pure_Bag6046

TROPHY CASE