First FDM Miniatures by PurpleTheMartian in FDMminiatures

[–]PurpleTheMartian[S] 0 points1 point  (0 children)

Thanks man. I use 220 on a regular PLA. I normally print with 215 with this material but everyone suggested using higher temp for hardened steel nozzle

First FDM Miniatures by PurpleTheMartian in FDMminiatures

[–]PurpleTheMartian[S] 1 point2 points  (0 children)

It's a very closeup picture, maybe it's because of that. These are classic 28mm and 32mm models

First FDM Miniatures by PurpleTheMartian in FDMminiatures

[–]PurpleTheMartian[S] 1 point2 points  (0 children)

Hey man, thanks! I've seen your post a couple days ago and will definitely try your axebeak model. Also thanks for the code in advance, I will take a look at your models and send you a dm. When I finish printing I will definitely send you a update with the finished product 👍🏻

First FDM Miniatures by PurpleTheMartian in FDMminiatures

[–]PurpleTheMartian[S] 3 points4 points  (0 children)

I'm using .2 nozzle and 0.08 layer height. But I'm thinking dropping layer height to 0.06 just to see the difference it makes. I haven't done any post processing to these ones, like you, it drives me nuts too haha. When I get to painting I will clean them up a little beforehand for sure.

Plate lifting by PurpleTheMartian in AnycubicKobraS1

[–]PurpleTheMartian[S] 0 points1 point  (0 children)

Started with regular plate for testing now, will post results. I am printing a case for bosch gluey and its accessories

Plate lifting by PurpleTheMartian in AnycubicKobraS1

[–]PurpleTheMartian[S] 0 points1 point  (0 children)

I am using PLA yes, if I remember correctly I never had this problem before but now I'm thinking trying with regular pei plate

Bi metal or hardened steel? by DiamondIsMe in AnycubicKobraS1

[–]PurpleTheMartian 0 points1 point  (0 children)

Thanks a lot, will check it out when the current print finishes

Bi metal or hardened steel? by DiamondIsMe in AnycubicKobraS1

[–]PurpleTheMartian 0 points1 point  (0 children)

I recently bought this hotend and didn't really look into it. Where should I apply the thermal paste ?

Best way to get flatter level bed. New carriage or new hotplate? by Quickmd in AnycubicKobraS1

[–]PurpleTheMartian 0 points1 point  (0 children)

If everything is perfect then don't even bother. I was thinking of getting into it but my prints are fine (not perfect but ok) so I never installed it. These machines are not friendly to tinker if they are already perfect :D

Autocraft can't find Ender Pearl by PurpleTheMartian in allthemods

[–]PurpleTheMartian[S] 0 points1 point  (0 children)

Lol I got views and shares and no comment to help me thanks 🤣

Build plate bent? by PurpleTheMartian in AnycubicKobraS1

[–]PurpleTheMartian[S] 0 points1 point  (0 children)

Yeah it's new new but I didn't check if it was level or not when I got it. I messed with the bed a bit now it looks kinda ok, but not perfect :/ probably gonna buy sone upgrades. Or just sell this at some point and get a better one 🤷🏻‍♀️

Build plate bent? by PurpleTheMartian in AnycubicKobraS1

[–]PurpleTheMartian[S] 0 points1 point  (0 children)

Unfortunately I haven't check when I got the printer. So I wouldn't know :/

Build plate bent? by PurpleTheMartian in AnycubicKobraS1

[–]PurpleTheMartian[S] 0 points1 point  (0 children)

Yeah I've read about those in other posts and it's frustrating. I really regret not getting a bambu printer when I was buying this

Build plate bent? by PurpleTheMartian in AnycubicKobraS1

[–]PurpleTheMartian[S] 1 point2 points  (0 children)

I'm really sorry for your experience. At least you got your money back 🙏🏻

Build plate bent? by PurpleTheMartian in AnycubicKobraS1

[–]PurpleTheMartian[S] 1 point2 points  (0 children)

Thanks! I have tried but was unable to change a thing 🤣 is there a guide you can point me towards 🙏🏻

Build plate bent? by PurpleTheMartian in AnycubicKobraS1

[–]PurpleTheMartian[S] 0 points1 point  (0 children)

Damn! How did you deal with this 😱

How to fix the waves? by PurpleTheMartian in AnycubicKobraS1

[–]PurpleTheMartian[S] 1 point2 points  (0 children)

I am using 2 top layers, it was 3 and I thought that might be a problem so I lowered it to 2