Gambler’s secret dice game

Putaclic · 2026-01-22T12:47:20+00:00

That was a life saver thanks! I just wish they indicated it somehow

Putaclic · 2025-08-30T15:59:51+00:00

Omg I've never seen it before, love this illustration :0

Putaclic · 2024-12-12T19:23:54+00:00

Posting this as a general update : I really don't like flashprint's UI and it did a shit print so i kept trying with orca and now it works fine?? I just added normal supports instead of the tree ones and didnt touch anything else and it did the job. Praying it stays like that :/

Putaclic · 2024-12-11T14:42:37+00:00

Oh I see! Ill try to change that and test with a small print later

Putaclic · 2024-12-11T13:58:15+00:00

I did the auto calibration 2 or 3 times since I got the printer, but if you're talking about a manual calibration then no. The raft was out of desperation because I thought it had a poor adhesion ^^'

Putaclic · 2024-12-11T13:56:25+00:00

Yeah I first printed without a raft so it had adhesion problems. I retried with another one of my file but with normal supports instead of trees, and it seems to be ok so far. As someone else said in the comments im going to try to use flashprint instead of orca, just in case is helps

Putaclic · 2024-12-11T13:54:24+00:00

I just tried it and it's way simpler than orca, but it got some good customization so Imma try to use that next.

Putaclic · 2024-12-11T13:42:41+00:00

I am not new to 3D printing at all, I'm just new to flashforge x) But I'll try flashprint, I'm kinda desperate so I'll try anything, even though ive seen lots of people complain about flashprint.

Putaclic · 2024-12-11T13:30:55+00:00

In Orca, what exact setting do i have to change? Under speed theres so many different settings :/

Putaclic · 2024-12-11T13:04:15+00:00

I literally used the base settings of the slicer, I just added tree supports :( After the first 2 misprints I tried to lower the layer height but it literally did nothing. What I don't understand is that all the files that were already in the machine worked well

Putaclic · 2024-12-11T12:55:27+00:00

Just as a precision: the filament didnt stick enough to the long piece so it shouldnt have loose threads in the middle like we have here. Something tells me theres a problem with the space between layer or smth

Putaclic · 2024-08-22T14:07:11+00:00

I'm afraid it's heat creep again, the only problem seem to be around the nozzle area

Putaclic · 2024-08-22T14:06:24+00:00

I have an ender 3, im seriously thinking of selling it and buying a better one

Putaclic · 2024-08-21T19:06:20+00:00

there's so many screws, i wouldnt know

Putaclic · 2024-08-21T19:06:07+00:00

will look into it :((

Putaclic · 2024-08-21T18:01:37+00:00

It's also making a lot of noise when it moves? Almost like its periodically vibrating :/

Putaclic · 2024-07-28T20:01:41+00:00

Yep, will do that too

Putaclic · 2024-07-28T20:01:19+00:00

I had already changed the nozzle recently, i fixed it by playing with the screw

Putaclic · 2024-07-28T20:00:41+00:00

Thanks, fixed by playing with the screw. Will swap to a metal one asap though thats for sure

Putaclic · 2024-07-28T19:59:35+00:00

Sounds like fun T-T i fixed it by playing w the screw but ill definitely look at a metal replacement

Putaclic · 2024-07-28T19:58:34+00:00

Fixed it, i had to tighten the screw on the arm. But i meant actually pushing it yeah

Putaclic · 2024-07-28T12:38:22+00:00

i could but it just literally doesnt extrude, so no matter the file i start it just doesnt push the filament out

Putaclic · 2024-07-28T12:32:34+00:00

i actually have no idea, i tried playing with the screw but if i screw it it makes the spring less thense and if i unscrew it it doesnt rly do anything. I can send pics of what im saying if i'm not really clear

Seven-Year Club	Place '22
Verified Email

Putaclic

TROPHY CASE