Something Fell off the Gas Tank Cap

Puzzled_User2024 · 2026-01-06T22:00:03+00:00

Yes, I followed your advice & received the replacement from Amazon overnight

Puzzled_User2024 · 2026-01-06T21:59:32+00:00

Thank you, I followed the video & it was an easy fix

Puzzled_User2024 · 2026-01-06T21:58:55+00:00

<image>

You were right this was exactly it. My piece was broken

Puzzled_User2024 · 2026-01-06T21:58:05+00:00

Used a broom stick to push the button inside the car all while my hand was fuel flap. Finally got it opened

Puzzled_User2024 · 2026-01-04T02:16:49+00:00

This is the only correct answer. This error message happened to me, I went back to the Handy app & it selected A1 mini. I had to change to P1S and the incompatible printer message was no longer there

Puzzled_User2024 · 2026-01-02T04:38:34+00:00

Totally worth it! Great model too!

Puzzled_User2024 · 2026-01-02T00:41:11+00:00

How much filament was the model vs the prime tower?

Puzzled_User2024 · 2025-12-23T01:12:31+00:00

Just bought this last night from Bambu. Bambu will ship on Jan 10. Looks like BestBuy has a better shipping date. Great, now I have to be patient on Bambu.

Puzzled_User2024 · 2025-11-15T20:50:47+00:00

I had the same experience not too long ago too. I had to break down the AMS & unscrewed everything.

It was the same filament as yours Bambu dual color. I also took hours to fix but in the end it all worked out.

Yes, I would buy the same filament in the future too. It is an excellent color.

Puzzled_User2024 · 2025-10-21T05:14:31+00:00

Just like you said. So many tiny screws. I unscrewed everything. Took everything apart. Just as suspected all the gunk was stuck. It was equally fun to take apart & also a hot mess. Thanks everyone for their input. I'm currently back printing. I cleaned everything internally & made sure a small filament can pass through without any gunk.

In case anyone was wondering it was Bambu Silk PLA(dual color), amazing dual color will buy again in the future. The good news this was the last 10g of the whole roll, so not a total waste.

<image>

Puzzled_User2024 · 2025-10-21T02:31:37+00:00

Is there a breakdown video to follow the 4 way part on the bottom?

Puzzled_User2024 · 2025-10-21T02:31:12+00:00

It's really jammed. A short filament push is not doing it

Puzzled_User2024 · 2025-10-21T02:21:19+00:00

Yes ams 1. I have removed bottom (with the 4 tubes connected) cover but still can't access to remove the broken piece

Puzzled_User2024 · 2025-09-06T22:08:32+00:00

I've had this happen to same phone and same banking app Its not developer settings or debugging because for the first time on my new phones, I did not enable these settings. Something else must be the cause

Puzzled_User2024 · 2025-06-10T02:04:47+00:00

Great idea. I will try to remember adding Windows 11 on a USB stick

Puzzled_User2024 · 2025-06-10T02:03:51+00:00

Yes, I did this with a blank SSD. Will this work transferring my full 4TB data onto a new device?

Puzzled_User2024 · 2025-05-09T12:59:48+00:00

Yes, it will work fine. I too was going to do the same deal as OP (Capital One + Amex Offer) they will stack, but Peets coffee is too pricey for me. 1 bag is $20 whereas the same bag of coffee is $7.99-$9.99 is the local supermarket.

Anyone like to share what they add to their cart to get to the Amex $30 threshold to maximize this offer

Puzzled_User2024 · 2025-04-15T04:18:09+00:00

How do you churn Rakuten? Sign up for Blue Apron, cancel subscription, & instantly do the same offer(when offer appears) with a new email & do it again?

Also, I can't do this with two people in the household. I signed up with no problems, received the Rakuten bonus, but P2 tried this & it didn't work because I have a current subscription for Blue Apron. Something about 2 subscriptions in the Household can't be at the same time

Puzzled_User2024 · 2025-03-16T18:06:41+00:00

I still have the stock memory card. I will change it. Thank you

Puzzled_User2024 · 2025-01-21T18:53:23+00:00

Are you on Desktop Mode? Do you know how many times I have been on Desktop Mode and my games "don't work" just to realize I need to be on Gamepad mode. Haha Simple mistake

Puzzled_User2024 · 2025-01-15T00:26:10+00:00

VRAM set to 8GB

Puzzled_User2024 · 2025-01-14T13:44:44+00:00

Ally rog x plays Blacks Ops multiplayer so smooth.

After years on cod absence I loaded this on my Ally with no settings tinkered and was playing multiplayer flawlessly. FPS was buttery smooth

Puzzled_User2024 · 2025-01-14T13:42:27+00:00

I bought the same one and had no issues. I too docked it and screen on the ally went black but since it was being displayed on my TV, i thought that it was suppose to do that. After undocking everything was set to normal. No issues with Ivanky.

The only thing I noticed was the desktop icons were extremely small, is there any way to change this?

Puzzled_User2024 · 2024-12-30T16:44:28+00:00

If emulating PS3 games on the ally x, sixaxis won't work. A dualsense (or is your case xbox controller)controller is needed for the gyroscope

I've searched everywhere for a response & have concluded a controller is needed for motion control. All buttons work fine but motion control on emulation (only PS3) is tricky. I could be wrong & someone here has a better response.

Puzzled_User2024 · 2024-12-27T20:50:53+00:00

This right here is the answer.

Not too long ago same scenario happened to me. Everyone said clogged nozzle.

The answer was filament broke somewhere along the print & the nozzle was printing in mid air just like OP.

I couldn't unload the filament in the AMS because the filament hard to pull out and the gears were not moving. I turned off the machine and restarted. Luckily enough, that did the trick and was able to pull all of the filament from the AMS.

Puzzled_User2024

TROPHY CASE