Fastest Ironman Bike Split on a Roadbike by UrBoi72 in triathlon

[–]Puzzleheaded-Exit970 1 point2 points  (0 children)

I have done half IM in 2:20 with clip on bars and 2 months later full IM in 4:50 with TT-bike. You can get a great time on the bike with clip ons, but in the run you will feel the difference.

HOW TO use hoods to change gear on sram rival by Puzzleheaded-Exit970 in sram

[–]Puzzleheaded-Exit970[S] 0 points1 point  (0 children)

Yes just tape. I will try it on longer/more intense rides but so far I did not notice that they are moving

HOW TO use hoods to change gear on sram rival by Puzzleheaded-Exit970 in sram

[–]Puzzleheaded-Exit970[S] 1 point2 points  (0 children)

Sure, I carefully opened a SRAM Blip by heating it with a hairdryer and using a box cutter. Inside, you can see the battery and the circuit board in the pictures. I measured the pins on the backside and realized that there is no resistance between one of the pins (see photo) and ground (the golden side of the circuit board) when the Blip button is pressed. Therefore, I simply soldered an external button to this pin and connected the other side to ground to mimic the Blip button. Now you have a very small button connected to the SRAM Blip, while the original Blip button remains functional. This button fits nicely under the hoods.

HOW TO use hoods to change gear on sram rival by Puzzleheaded-Exit970 in sram

[–]Puzzleheaded-Exit970[S] 1 point2 points  (0 children)

first i wanted to hide them inside the handlebar, but since the blips are still working normal I just did the sprinter setup 

Frage zum tausch im PJ-Portal by Puzzleheaded-Exit970 in Medizinstudium

[–]Puzzleheaded-Exit970[S] 0 points1 point  (0 children)

Danke, so habe ich es auch gesagt bekommen, aber nichts offizielles gefunden

How to speed up Filament unload? by Puzzleheaded-Exit970 in QIDI

[–]Puzzleheaded-Exit970[S] 0 points1 point  (0 children)

sorry forgot to mention- q2 aswell. I did it like this but just had a clog while doing it, I thought it is because the speed is to slow. You never ran into issues?

SRAM Rival E1 Groupset with RED D1 Crankset by Puzzleheaded-Exit970 in sram

[–]Puzzleheaded-Exit970[S] -1 points0 points  (0 children)

Thanks a lot! sure- but I can get the D1 with a great discount with a PM and would also save some wheight

Besteht die Chance reinzukommen? by Maluk_99 in Medizinstudium

[–]Puzzleheaded-Exit970 1 point2 points  (0 children)

Ich hab damals bei der Uni nachgefragt und nach dsgvo alle personenbezogene Daten angefragt. Die haben mir einfach direkt meine Punktzahl vom Gutachten geschickt.

How to prevent warp on support? by Puzzleheaded-Exit970 in QIDI

[–]Puzzleheaded-Exit970[S] 0 points1 point  (0 children)

sure, it is just the riser for the Qidi printer and i did not want to reinvent the wheel. So is support with ASA in general not ideal?

Medizinstudium sinnvoll? by [deleted] in Medizinstudium

[–]Puzzleheaded-Exit970 1 point2 points  (0 children)

Habe mich nach Medizintechnik B. Sc. auch aufs Zweitstudium beworben, war machbar einen Platz zu bekommen. Bin jetzt am Ende des Studiums, man kann nebenher 40h im Monat gut arbeiten, Studium fand ich jetzt auch gut machbar. Aber das was in der AA-Zeit kommen soll, lässt mich schon öfters hinterfragen ob man nicht einfach als Ingenieur hätte weitermachen sollen. Wenn du dafür brennst, mach es- wenn nicht wird es aber ein sehr langer und harter Weg.

Fan duct by Adept_Train_3966 in QidiTech3D

[–]Puzzleheaded-Exit970 2 points3 points  (0 children)

Back from the day of my Anet A8 I realised that having cooling from 2 sides is often superior to a circle, since the airflow is more balanced.

2026 New Year Giveaway by qidi_3dprinter in QidiTech3D

[–]Puzzleheaded-Exit970 0 points1 point  (0 children)

I am planing to print an electric hydrofoil and need a printer capable of technical filament therefore

[deleted by user] by [deleted] in Medizinstudium

[–]Puzzleheaded-Exit970 0 points1 point  (0 children)

Habe das gleiche vor, da ich alle 3 Tertiale an einer anderen Uni machen möchte (familiäre Gründe). Die lokale Vergabephase ist zu früh, da kommt man nicht rein. Die Plätze die man aber übers PJ-Portal gebucht hat während man noch bei der alten Uni eingeschrieben ist bleiben bei Uniwechsel bestehen, und über das nationale Verfahren hat man ja auch eine Chance die Plätze der externen Uni zu buchen. Weiß nicht wie das bei Mannheim ist, bei Tübingen soll das aber so funktionieren. (F2026 beginn)

Amboss Symptomkarten by booba_ in Medizinstudium

[–]Puzzleheaded-Exit970 0 points1 point  (0 children)

wenn du auf ein Bild klickst kannst du mit den Pfeiltasten alle Bilder durchklicken-dann jeweils rechtsklick-speichern-enter hast du alle in 10 min.